Husqvarna Automower 305 User manual

Please read the Operator’s Manual carefully and make sure you understand the instructions before using the robotic lawnmower.
Lea detenidamente el manual de instrucciones y asegúrese de entender su contenido antes de utilizar el robot cortacésped.
Veuillez lire attentivement le manuel d’utilisation et bien l’assimiler avant d’utiliser le robot de tonte.
ロボット式芝刈機をご使用になる前に、この取扱説明書を注意深くお読みいただき、内容を必ずご確認ください。.
OPERATOR’S MANUAL
MANUAL DE USUARIO
MANUEL D’UTILISATION
取扱説明書
hUSqvARNA AUTOMOWER®
305/308/320/330X
FR
EN
ES
JA

2
EN: If the robotic lawnmower is stolen, it is important to notify Husqvarna Group AB of this. Contact your local dealer and provide the product’s
serial number so that it can be registered as stolen in an international database. This is an important step in the robotic lawnmower’s theft protection
which reduces interest in the buying and selling of stolen robotic lawnmowers.
The product’s serial number consists of nine digits and is shown on the product rating plate (found on the inside of the display cover) and the
product’s packaging.
ESP: Si le roban el robot cortacésped, es importante que lo notique a Husqvarna Group AB. Póngase en contacto con su distribuidor local y facilí-
tele el número de serie del producto; de este modo quedará registrado como robado en una base de datos internacional. Este es un paso
importante del procedimiento de protección antirrobo del robot cortacésped, ya que reduce el interés de compraventas de cortacéspedes robados.
El número de serie del producto consta de nueve dígitos y se muestra en la placa de características (situada en la cara interna de la cubierta de la
pantalla) y en el embalaje del mismo.
FR: En cas de vol du robot de tonte, il est important de le signaler à Husqvarna Group AB. Contactez votre revendeur local et fournissez-lui le
numéro de série du produit an qu’il soit enregistré comme produit volé dans la base de données internationale. Il s’agit d’une étape importante de
la procédure de protection contre le vol permettant de réduire l’intérêt à acheter et à vendre des robots de tonte volés.
Le numéro de série du produit comporte neuf chiffres et il est indiqué sur sa plaque d’identication (à l’intérieur du capot de l’écran) et sur son
emballage.
JA:ロボット式芝刈機が盗難にあった場合、この旨をハスクバーナグループABに通知することが重要です。お近くの販売店にお問い合わせいただき、国際デ
ータベースに盗難機として登録できるよう、製品のシリアル番号をお知らせください。これはロボット式芝刈機の盗難防止における重要な手順で、盗難にあっ
たロボット式芝刈機の売買に対する関心をなくします。
製品のシリアル番号は9桁の数字で構成されており、ディスプレイカバーの内側にある製品の定格プレートと製品のパッケージに記載されています。
www.automower.se
MEMO
Serial number / Número de serie / Numéro de série /
シリアル番号： ________________________________________________
PIN code / Código PIN / Code PIN / PINコード： ________________________________________________
Dealer / Distribuidor / Revendeur / 取扱店： ________________________________________________
Dealer’s telephone number:
Número de teléfono del distribuidor:
Numéro de téléphone du concessionnaire :
取扱店の電話番号： ________________________________________________

3
EN
FR
ES
JA
1Introductionandsafety 4
1.1 Introduction 4
1.2 Symbols on the product 4
1.3 Symbols in the Operator’s Manual 4
1.4 Safety instructions 5
2Presentation 7
2.1 What is what? 7
2.2 Function 9
2.3 Adjusting the cutting height 9
3Controlpanel 10
3.1 Control panel Automower® 305/308 10
3.2 Control panel Automower® 320/330X 11
3.3 The charging station’s PARK button 12
4Menufunctions 12
5Guaranteeterms 13
6Maintenance 13
6.1 Rengöring 13
6.2 Charging station 13
6.3 Battery 13
7Troubleshooting 13
8Environmentalinformation 13
9TechnicalData 14
10ECDeclarationofConformity 15
10.1 EC declaration of conformity (Only applicable to European
versions) 15
1Introductionetsécurité 28
1.1 Introduction 28
1.2 Symboles concernant le produit 28
1.3 Symboles dans le manuel d'utilisation 28
1.4 Instructions de sécurité 29
2Présentation 31
2.1 Qu'est-ce que c'est ? 31
2.2 Fonctionnement 33
2.3 Réglage de la hauteur de coupe 33
3Panneaudecommande 34
3.1 Panneau de commande Automower® 305/308 34
3.2 Panneau de commande Automower® 320/330X 35
3.3 Bouton PARK de la station de charge 36
4Fonctionsdumenu 36
5Conditionsdegarantie 37
6Maintenance 37
6.1 Nettoyage 37
6.2 Station de charge 37
6.3 Batterie 37
7Dépannage 37
8Informationsenvironnementales 37
9Caractéristiquestechniques 38
10DéclarationdeconformitéCE 39
10.1 Déclaration de conformité CE (uniquement applicable aux
versions européennes) 39
1Introducciónyseguridad 16
1.1 Introducción 16
1.2 Símbolos que aparecen en el producto 16
1.3 Símbolos que aparecen en el manual de usuario 16
1.4 Instrucciones de seguridad 16
2Presentación 19
2.1 Componentes 19
2.2 Funcionamiento 21
2.3 Ajuste de la altura de corte 21
3Paneldecontrol 22
3.1 Panel de control de Automower® 305/308 22
3.2 Panel de control de Automower® 320/330X 23
3.3 Botón PARK de la estación de carga 24
4Funcionesdemenú 24
5Condicionesdelagarantía 25
6Mantenimiento 25
6.1 Limpieza 25
6.2 Estación de carga 25
6.3 Batería 25
7Deteccióndeaverías 25
8Informaciónmedioambiental 25
9Datostécnicos 26
10DeclaraciónCEdeconformidad 27
10.1 Declaración CE de conformidad (válida solamente para
versiones europeas) 27
1概要と安全について 40
1.1 概要 40
1.2 製品に表記されるシンボルマーク 40
1.3 取扱説明書に表記されるシンボルマーク 40
1.4 安全の手引き 40
2外観 43
2.1 各部分の説明 43
2.2 機能 45
2.3 刈り高の調整 45
3コントロールパネル 46
3.1 コントロールパネルAutomower® 305/308 46
3.2 コントロールパネルAutomower® 320/330X 47
3.3 充電ステーションの［PARK（駐車）］ボタン 44
4メニューの機能 48
5保証の条件 49
6メンテナンス 49
6.1 Rengöring 49
6.2 充電ステーション 49
6.3 バッテリー 49
7トラブルシューティング 49
8環境に関する情報 49
9主要諸元 50
10EC適合性宣言 51
10.1 EC適合性宣言（欧州モデルのみ該当） 51

1Introductionandsafety
1.1Introduction
This Operator’s Manual contains brief important information about the
robotic lawnmower. A complete Operator’s Manual is available on the
attached DVD. There you can read more about e.g. installation, menus,
garden examples, maintenance and troubleshooting. Contact your dea-
ler if you want to order the complete manual in printed format.
As a complement to this Operator’s Manual, there is more information
available on the Automower® website, www.automower.com. Here you
can nd more help and guidance in its use.
Husqvarna AB has a policy of continuous product development and the-
refore reserves the right to modify the design, appearance and function
of products without prior notice.
The following system is used in the Operator’s Manual to make it easier
to use:
• Text written in italics is a text that is shown on the robotic
lawnmower’s display or is a reference to another section in the
Operator’s Manual.
• Words written in bold are one of the buttons on the robotic
lawnmower’s keypad.
• Words written in UPPERCASE and italics refer to the position of
the main switch and the different operating modes available in the
robotic lawnmower.
•
1.2Symbolsontheproduct
These symbols can be found on the robotic
lawnmower. Study them carefully.
Please read the Operator’s Manual carefully
and make sure you understand the instruc-
tions before using the robotic lawnmower.
The warnings and safety instructions in this
Operator’s Manual must be carefully followed
if the robotic lawnmower is to be used safely
and efciently.
The robotic lawnmower can only start when
the main switch is set to 1 and the correct
PIN code has been entered. Turn the main
switch to 0 before carrying out any inspec-
tions and/or maintenance.
Remain at a safe distance from the robotic
lawnmower when it is running. Keep your
hands and feet away from the rotating bla-
des. Never put your hands or feet close to or
under the body when the robotic lawnmower
is running.
IMPORTANTINFORMATION
PleasereadtheOperator’sManualcarefullyandmakesure
youunderstandtheinstructionsbeforeusingtherobotic
lawnmower.
Never use a high-pressure washer or even run-
ning water to clean the robotic lawnmower.
Do not ride on the robotic lawnmower.
This product conforms to the applicable EC Directives.
Noise emission to surroundings. The product’s emis-
sions are set out in chapter Technical data and on the
rating plate.
It is not permitted to dispose of this product as normal
household waste when it has reached the end of its use-
ful life. Ensure that the product is recycled in accor-
dance with local legal requirements.
The chassis contains components which are sensitive
to electrostatic discharge (ESD). The chassis is also a
signicant part of the robotic lawnmower’s design and
must be resealed in a professional manner if the pro-
duct is to be used outdoors. For this reason the chassis
can only be opened by authorised service technicians.
A broken seal can result in the entire or parts of the
guarantee no longer being valid.
The low voltage cable must not be shortened, extended
or spliced.
Do not use a trimmer nearby the low voltage cable. Be
careful when trimming edges where the cables are pla-
ced.
1.3SymbolsintheOperator’sManual
• A warning box indicates the risk of personal injury, especially if the
instructions are not followed.
• An information box indicates the risk of material damage, especi-
ally if the instructions are not followed. The box is also used where
there is a risk of user error.
WARNING
Text
IMPORTANTINFORMATION
Text
WARNING
Theroboticlawnmowercanbedangerousifused
incorrectly.Keepyourhandsandfeetawayfromthe
rotatingblades.Neverputyourhandsorfeetcloseto
orunderthebodywhenthemotorisrunning.
ENGLISH
WARNING
Neverusetheroboticlawnmowerwhenpersons,
especiallychildren,orpets,areinthecuttingarea.
English - 4

1.4Safetyinstructions
Use
This robotic lawnmower is designed to mow grass in open and level
ground areas. It may only be used with the equipment recommended by
the manufacturer. All other types of use are incorrect. The
manufacturer’s instructions with regard to operation/maintenance and
repair must be followed precisely.
The robotic lawnmower may only be operated, maintained, and repaired
by persons that are fully conversant with its special characteristics and
safety regulations. Please read the Operator’s Manual carefully and
make sure you understand the instructions before using the robotic
lawnmower.
Never use the robotic lawnmower when persons, especially children, or
pets, are in the cutting area. If there are persons, or pets, in the cutting
area it is recommended that the lawnmower be programmed for use
during hours when the area is free from persons, e.g. at night.
It is not permitted to modify the original design of the robotic lawnmo-
wer. All modications are made at your own risk.
Check that there are no stones, branches, tools, toys or other objects on
the lawn that can damage the blades. Objects on the lawn can also lead
to the robotic lawnmower getting stuck in them and help may be requi-
red to remove the object before the mower can continue mowing.
Start the robotic lawnmower according to the instructions. When the
main switch is set to 1; make sure to keep your hands and feet away
from the rotating blades. Never put your hands and feet under the robo-
tic lawnmower.
Never lift up the robotic lawnmower or carry it around when the main
switch is in position 1.
Do not let persons who do not know how the robotic lawnmower works
and behaves use it.
The robotic lawnmower must never be allowed to collide with persons or
other living creatures. If a person or other living creature comes in the
lawnmower’s way it shall be stopped immediately.
Do not put anything on top of the robotic lawnmower or its charging sta-
tion.
Do not allow the robotic lawnmower to be used with a defective blade
disc or body. Neither should it be used with defective blades, screws,
nuts or wires.
Do not use the robotic lawnmower if the main switch does not work.
Always switch off the robotic lawnmower using the main switch when the
robotic lawnmower is not in use. The robotic lawnmower can only start
when the main switch is set to 1 and the correct PIN code has been ente-
red.
The robotic lawnmower must never be used at the same time as a
sprinkler. In this case use the timer function so the mower and sprinkler
never run simultaneously.
Husqvarna AB does not guarantee full compatibility between the robotic
lawnmower and other types of wireless systems such as remote con-
trols, radio transmitters, hearing loops, underground electric animal fen-
cing or similar.
The built-in alarm is very loud. Be careful, especially if the robotic lawn-
mower is handled indoors.
Connectingthetransformer
Take the following into consideration when planning where to place the
transformer:
• Close to the charging station
• Protection from rain
• Protection from direct sunlight
If the transformer is connected to an electrical socket outdoors, this must
be approved for outdoor use. It is recommended to use an earth fault-
breaker when connecting the transformer to the wall socket.
The low voltage cable must not under any circumstances be shortened
or extended. Place the low voltage cable so that the blades on the blade
disc can never come in contact with it.
Do not, under any circumstances, mount the transformer at a height
where there is a risk it can be submerged in water (at least 30 cm from
the ground). It is not permitted to place the transformer on the ground.
Transport
The original packaging should be used when transporting the robotic
lawnmower over long distances.
To safely move from or within the working area:
1. Press the STOP button to stop the robotic lawnmower. If security is
set to the medium or high level, the PIN code has to be entered.
The PIN code has four digits and is chosen when the robotic
lawnmower is started for the rst time.
2. Set the main switch to position 0.
3. Carry the robotic lawnmower by the handle with the blade disc
away from the body.
Automower 320/330X
Automower 305/308
Automower 320/330X
Automower 305/308
IMPORTANTINFORMATION
Donotlifttheroboticlawnmowerwhenitisparkedinthe
chargingstation.Itcandamagethechargingstationand/
ortheroboticlawnmower.PressSTOPandinsteadrstpull
theroboticlawnmoweroutofthechargingstationbefore
liftingit.
ENGLISH
English - 5

Maintenance
WARNING
Whentheroboticlawnmoweristurnedupside
downthemainswitchmustalwaysbeinthe0
position.
Themainswitchshouldbesetinthe0position
duringallworkonthemower’schassis,suchas
cleaningorreplacingtheblades.
Inspect the robotic lawnmower each week and replace any damaged or
worn parts. The following must be carried out in the weekly inspections:
1. Clean the charging station from grass, leaves, twigs and other
objects that may impede the robotic lawnmower from docking with
the charging station.
2. Set the main switch to position 0 and put on a pair of protective
gloves.
3. Turn the robotic lawnmower upside down. Check the following:
• Clean the wheels and axles. Grass on the drive wheels can inu-
ence operation on slopes.
• Clean the body, chassis and cutting system. Grass, leaves and
other objects that weigh down the product affect performance.
• Check that all mower blades are intact. Check also that the
mower blades can pivot freely. Even if the mower blades are
intact, they must be replaced on a regular basis for the best
mowing result and low energy usage. Replace all blades and
screws at the same time if necessary so that the rotating parts
are kept balanced.
WARNING
Alwaysuseoriginalbladesandscrewswhenrepla-
cing.Onlyreplacingthebladesandreusingthe
screwcanresultinascrewwearingduringmowing
andshearing.Thebladescanthenbepropelled
fromunderthebodyandcauseseriousinjury.
ENGLISH
English - 6

2Presentation
2.1Whatiswhat?
Automower®305/308
The numbers in the illustration represent:
1. Body
2. Cover to display, keypad and cutting height adjustment
3. Stop button/Catch to open the cover
4. Contact strips
5. LED for operation check of the charging station, boundary
wire and guide wire
6. Charging station
7. Carry handle
8. Battery cover
9. Blade disc
10. Chassis box with electronics, battery and motors
11. Main switch
12. Rear wheel
13. Charging strip
14. Keypad
15. Display
16. Loop wire for boundary loop and guide wire
17. Low voltage cable
18. Connector for connecting the loop wire to the charging station
19. Screws for securing the charging station
20. Transformer (the appearance of the transformer may
differ depending on market)
21. Staples
22. Measurement gauge for help when installing the boundary
wire (the measurement gauge is broken loose from the
box)
23. Coupler for the loop wire
24. Operator’s manual and quick guide
25. Extra blades
26. Alarm decal
27. DVD-Rom with full Operator’s Manual
28. Rating plate
1
3
2
16
17
6
5
4
12
13
11
19
20
21 22 23 24
18
8
9
10
7
25 26 27
14
28
15
ENGLISH
English - 7

Automower®320/330X
The numbers in the illustration represent:
1. Body
2. Hatch to display and keypad.
3. Stop button/Catch to open the hatch
4. Mounting for accessories, e.g. headlights (not available
with Automower® 320)
5. Front wheel
6. Rear wheels
7. LED for operation check of the charging station, boundary
wire and guide wire
8. Contact strips
9. Parking button (not available with Automower® 320)
10. Charging station
11. Rating plate
12. Display
13. Keypad
14. Cutting system
15. Chassis box with electronics, battery and motors
16. Handle
17. Main switch
18. Blade disc
19. Skid plate
20. Transformer
21. Loop wire for boundary loop and guide wire
22. Low voltage cable
23. Pegs
24. Connector for loop wire
25. Screws for securing the charging station
26. Measurement gauge for help when installing the boundary
wire (the measurement gauge is broken loose from the
box)
27. Couplers for the loop wire
28. Operator’s Manual and Quick Guide
29. Wire labels
30. Extra blades
31. Alarm decal
32. DVD-Rom with full Operator’s Manual
1
10
7
5
4
18
19
14
15 17
16
6
2
20
22
23
24
25 26 27 28
29
9
3
11
13
12
21
8
30
31
32
ENGLISH
English - 8

2.2Function
Capacity
The robotic lawnmower is recommended for lawns up to
• 500 m2: Automower® 305
• 800 m2: Automower® 308
• 2200 m2: Automower® 320
• 3200 m2: Automower® 330X
How big an area the robotic lawnmower can keep cut depends primarily
on the condition of the blades and the type, growth and moisture of the
grass. The shape of the garden is also signicant. If the garden mainly
consists of open lawn areas, the robotic lawnmower can mow more per
hour than if the garden consists of several small lawns separated by
trees, ower beds and passages.
A fully charged robotic lawnmower mows for 40 to 170 minutes, depen-
ding on model, the age of the battery and how thick the grass is. Then the
robotic lawnmower will charge for 50 to 90 minutes. The charging time
can vary depending on, among other factors, the ambient temperature.
Mowingtechnique
The cutting system in the Husqvarna robotic lawnmower is based on an
efcient and energy saving principle. Unlike many standard lawnmo-
wers, the robotic lawnmower cuts the grass instead of knocking it off.
We recommend you allow the robotic lawnmower to mainly mow in dry
weather to obtain the best possible result. Husqvarna’s robotic lawnmo-
wers can also mow in the rain, however, wet grass easily sticks on the
robotic lawnmower and there is a greater risk of slipping on steep slo-
pes.
The blades must be in good condition to obtain the best mowing result.
In order to keep the blades sharp for as long as possible it is important
to keep the lawn free from branches, small stones and other objects
which candamage the blades. Replace the blades regularly. For infor-
mation on replacing the blades, see the complete Operator’s Manual on
the attached DVD.
Workingmethod
The robotic lawnmower automatically mows the lawn. It continuously
alternates between mowing and charging.
The robotic lawnmower starts to search for the charging station when
the battery charge becomes too low. The robotic lawnmower does not
mow when it is searching for the charging station.
When the battery is fully charged, the robotic lawnmower will leave the
charging station and start mowing in a place in the garden where it has
not been lately. The place is decided by the built-in GPS-receiver. This
function is for Automower® 330X only. For the other models you might
have to set manual exit settings to make sure that the lawn will be cut
evenly, see chapter 6 Menu functions in the complete Operator’s Manual
on the attached DVD.
When the robotic lawnmower body hits an obstacle, the robotic lawnmo-
wer reverses and selects a new direction.
Sensors at the front and back will sense when the robotic lawnmower is
approaching the boundary wire. The robotic lawnmower travels up to 28
centimeters beyond the wire for Automower® 305/308 and up to 32 centi-
metres beyond the wire for Automower® 320/330X 32 before it turns
around.
The STOP button on the top of the robotic lawnmower is mainly used to
stop the robotic lawnmower when it’s running. When the STOP button is
pressed a hatch opens, behind which there is a control panel. The STOP
button remains pressed in until the hatch is closed again. This together
with the START button acts as a start inhibitor.
The control panel on the top of the robotic lawnmower is where you
manage all the robotic lawnmower settings.
When the main switch is set to 1 for the rst time, a start-up sequence
begins which includes a number of important basic settings, see 3.8 First
start-up and calibration in the complete Operator’s Manual on the
attached DVD.
Movementpattern
The movement pattern of the robotic lawnmower is random and is deter-
mined by the robotic lawnmower itself. A movement pattern is never
repeated. With this cutting system the lawn is mown very evenly without
any mowing lines from the robotic lawnmower.
Findingthechargingstation
The Automower® 320/330X can be set to search for the charging station
in one or more of three different ways. The robotic lawnmower automati-
cally combines these three search methods to locate the charging sta-
tion as fast as possible but also to avoid as much tracks forming as pos-
sible. Automower® 305/308 always follows the guide wire to the charging
station.
2.3Adjustingthecuttingheight
If the grass is long, allow the robotic lawnmower to start mowing at the
MAX cutting height. Once the grass is shorter, you can gradually lower
the cutting height.
Automower 320/330X
Automower 305/308
IMPORTANTINFORMATION
Duringtherstweekafteranewinstallation,thecutting
heightmustbesettoMAXtoavoiddamagingtheloopwire.
Afterthis,thecuttingheightcanbeloweredonestepevery
weekuntilthedesiredcuttingheighthasbeenreached.
ENGLISH
English - 9

Automower®305/308
The cutting height can be varied from MIN (2 cm) to MAX (5 cm). To
adjust the cutting height:
1. Press the STOP button to stop the robotic lawnmower and open the
cover.
2. Turn the height adjustment knob to the required position. The selected
position is indicated by the orange column that can be seen by the
knob through the window.
Automower®320/330X
The cutting height can be varied from MIN (2 cm) to MAX (6 cm) in nine
stages.
1. Press the STOP button to stop the robotic lawnmower and open the
hatch.
2. Press the MENU button to access the main menu.
3. Move the cursor using the arrow keys up/down to select Cutting height.
4. Press OK.
3Controlpanel
All forms of commands and settings for the robotic lawnmower are made
via the control panel. All functions are accessed via a number of menus.
The control panel consists of a display and a keypad. All information is
shown on the display and all input is done using the buttons.
The display texts are shown in English in the manual, but you will see
the texts on the product display in the choosen language.
1 2 3 4 5
IMPORTANTINFORMATION
AlwayspresstheSTARTbuttonbeforeclosingthecover
tostarttheroboticlawnmower.IftheSTARTbuttonisnot
pressed,amessagebeepisheardandtheroboticlawnmow-
erwillnotstart.
3.1ControlpanelAutomower®305/308
When the stop button has been pressed and the hatch is opened, the
start page is displayed showing the following information:
• Date and clock shows the current time.
• The number of operating hours indicates the number of hours
since the day of manufacture that the robotic lawnmower has spent
mowing or searching for the charging station..
• AUTO, MAN or HOME show which mode of operation is selected.
• The battery status shows the remaining battery charge.
• ECO is displayed if the robotic lawnmower is set in ECO mode.
• The clock symbol indicates when the timer settings are set. The
clock symbol is black when the robotic lawnmower is not allowed
to mow due to a timer setting and it is white when the mower is
allowed to mow.
• The MENU text illustrates that the main menu can be reached by
pressing the multi-choice button that is located under the text.
The keypad consists of four groups of buttons:
• The START button is used to activate the robotic lawnmower. This
is normally the last button to be pressed before closing the display
hatch.
• The three multi-choicebuttons offer various functions, among
others depending on where in the menu structure you are. The but-
ton function is shown at the very bottom of the display.
• The numberkeys are used for instance to enter the PIN code or
time settings. The number keys can also be used to enter a num-
ber series for shortcuts to the various menus.
• The operationselection button is symbolised by a house. When
the button has been pressed, the selected operation mode is
shown in the display.
Operationselection
By consecutively pressing the Operation selection button many times,
one can choose between three different operation modes.
• HOME. Sends the robotic lawnmower to the charging station. It
remains here until another operation mode is selected. The text
Home is shown in the operation window. When the battery is fully
charged, the robotic lawnmower will remain parked in the charging
station. The robotic lawnmower will rst leave the charging station
and begin mowing again when the operation selection is altered to
AUTO.
The Home setting is also used after a new installation or when
changes are made to an existing installation to test if the robotic
lawnmower can follow the guide wire and dock with the charging
station.
• AUTO. The standard, automatic operation mode where the robotic
lawnmower mows and charges automatically.
ENGLISH
English - 10

English - 11
• MAN. When mowing secondary areas the MAN setting must be
used. If MAN is selected and the robotic lawnmower starts when it
is out on the lawn, it will mow until the battery runs out. It will then
stop and the ’Needs manual charging’ message will appear. The
robotic lawnmower must then be moved manually to the charging
station and then started manually after charging. If the robotic
lawnmower charges in the MAN mode, it will fully charge, move
about 20 cm out of the charging station and then stop. This indica-
tes that it is charged and ready to start mowing.
3.2ControlpanelAutomower®320/330X
When the stop button has been pressed and the hatch is opened, the
start page is displayed showing the following information:
• Operating information, e.g. MOWING, PARKED or TIMER. If the
STOP button is pressed when the robotic lawnmower is running,
what it did just before it was stopped e.g. MOWING or SEAR-
CHING is displayed. The text READY is displayed if the robotic
lawnmower is not in any specic operating mode, e.g. if the main
switch has just been turned on.
• Date and clock show the current time.
• For Automower® 330X: The satellite symbol is shown when the
GPS-supported navigation is activated. Symbol (A) is shown when
the robotic lawnmower has made contact with a sufcient number
of GPS satellites. Symbol (B) shows when the robotic lawnmower
has not made contact with a sufcient number of GPS satellites.
Symbol (A) blinks during the rst days the robotic lawnmower is
working, as it is collecting GPS information about the installation.
• ECO is displayed if the robotic lawnmower is set in ECO mode.
• The clock symbol indicates when the timer settings are set. The clock
icon is white (A) when the robotic lawnmower is allowed to mow due
to a timer setting and it is black (B) when the mower is not allowed to
mow. If the mower is not allowed to mow due to Weather timer, sym-
bol (C) is shown. If the operation mode Override timer is chosen, sym-
bol (D) is shown.
• The battery status shows the remaining battery charge. If the robo-
tic lawnmower is loading, a ash is also shown over the battery
sumbol (A). If the robotic lawnmower is placed in the charging sta-
tion without charging, (B) is shown.
• The height adjustment setting is displayed as a scale/numerical
value.
• The number of operating hours indicates the number of hours
since the day of manufacture that the robotic lawnmower has spent
mowing or searching for the charging station.
The keypad consists of six groups of buttons:
• The START button is used to activate the robotic lawnmower. This
is normally the last button to be pressed before closing the display
hatch.
• The BACKandOKbuttons are used to navigate in the menu. The
OK button is also used to conrm settings in the menu.
• The arrow keys are used to navigate in the menu but also to make
selections in certain setting options.
• The MENU button is used to go to the main menu.
• The PARK button is used to send the robotic lawnmower to the
charging station.
• Numbers are used to enter settings, for example, PIN code, time
or exit direction. They can also be used to enter a number series
for shortcuts to the various menus see Main menu.
OperationselectionStart
When the START button has been pressed the following operation
selections can be selected:
• MAIN AREA. The standard, automatic operating mode where the
robotic lawnmower mows and charges continually.
• SECONDARY AREA. is used when mowing secondary areas
where the robotic lawnmower cannot travel to the charging station
automatically.
If the robotic lawnmower charges in the Secondary area mode, it
will fully charge, drive out about 50 cm and then stop. This indica-
tes that it is charged and ready to start mowing.
If the main working area has to be cut after charging, it is appro-
priate to switch the operation selection to Main area before placing
the robotic lawnmower in the charging station.
• OVERRIDE TIMER. Any timer settings made can be temporarily
overridden by selecting Override timer. It is possible to override the
timer for 1, 3 or 5 days.
• SPOT CUTTING means the robotic lawnmower will work in a spiral
pattern in order to cut the grass in the area where the grass has
been mown less than in other parts of the garden.
The Spot Cutting function is activated with the START button. You
can select how the robotic lawnmower should continue to work
once mowing is nished by pressing Right Arrow and then specify-
ing On Main Area or On Secondary Area.
OperationselectionParking
When the PARKbutton is pressed the following operation selections can
be chosen.
ENGLISH

• PARK UNTIL FURTHER NOTICE. The robotic lawnmower stays
in the charging station until another operating mode is selected by
pressing the STARTbutton.
• START AGAIN IN 3 HOURS. The robotic lawnmower stays in the
charging station for three hours and then returns automatically to
normal operation. This operation selection is suitable when there
is a need to pause operation, e.g. for temporary irrigation or for
games on the lawn.
• START WITH NEXT TIMER. The robotic lawnmower stays in the
charging station until the next Timer setting permits operation. This
operation selection is suitable if one wishes to cancel an ongoing
mowing cycle and allow the robotic lawnmower to stay in the char-
ging station until the next day. This option is not displayed if there
are no Timer settings.
3.3Thechargingstation’sPARKbutton
This section applies to Automower® 330X.
The PARK button on the charging station is used to call the robotic
lawnmower back to the charging station. The PARK button on the key-
pad in the robotic lawnmower offers the same function. .
A LED in the PARK button is lit solid when the button has been pressed.
The LED diode goes out when the robotic lawnmower is parked in the
charging station.
The robotic lawnmower remains parked in the charging station until the
START button on the robotic lawnmower’s keypad is pressed.
4Menufunctions
Mainmenu
There are a number of submenus under each option. You can access all
the functions to set the robotic lawnmower settings via these.
Browsebetweenmenus
Browse through the main menu and submenus with the help of the
multi-choice buttons.(Automower® 305/308) or the arrow keys (Automo-
wer® 320/330X). Enter values and times using the number keys and
conrm each selection with the multi-choice button marked OK. Press
BACK to go up a step in the menu or keep the HOME(Automower®
305/308) alternatively MENU (Automower® 320/330X) button pressed in
for 2 seconds to go directly to the main menu.
Automower 320/330X
Automower 305/308
Submenus
Certain submenus contain a box that can be checked. This is used to
select which option(s) is/are selected or if a function is activated/deac-
tivated..
Menustructure
The following table summarises the menu selections found in the main
menu. For more detailed information about how each function is used
and which setting options are available, see the complete Operator’s
manual on the attached DVD.
Timer
The lawn should not be cut too often to obtain the best mowing
result. Consequently, it is important to limit the operating time
using the timer function if the working area is less than the
robotic lawnmower’s working capacity. The timer function is
also an ideal tool to control which periods the robotic lawnmo-
wer should not mow, for example, when the children are play-
ing in the garden.
Cutting height (for Automower® 320/330X)
The cutting height can be varied from MIN (2 cm) to MAX (6 cm).
Security
In this menu, settings relating to security and the connection
between the robotic lawnmower and the charging station can
be made.
There are three security levels to choose from but it is also
possible to dene your own combination of security functions.
Messages (for Automower® 320/330X)
IHistorical, fault and information messages can be read in this
menu. Regards some of the most common fault messages,
there are tips and advice to help you rectify the fault.
Weather timer (for Automower® 320/330X)
This function allows the robotic lawnmower to automatically
adjust its mowing times based on how quick the lawn grows.
When the weather is good for grass growth, the robotic lawn-
mower mows more often and when grass growth is slower the
robotic lawnmower will automatically spend less time on the
lawn.
Installation
This menu is used to steer the robotic lawnmower to remote
parts of a working area and to control how the robotic lawn-
mower searches for the charging station. For many working
areas the factory settings can be kept, i.e. allow the robotic
lawnmower itself to combine the various search methods and
the underlying settings.
Settings
This selection allows you to make changes to the general
robotic lawnmower settings such as date and time.
Accessories (for Automower® 320/330X)
This menu handles the settings for accessories assembled on
the mower. Contact your dealer for information on what acces-
sories are suitable for your robotic lawnmower.
ENGLISH
English - 12

English - 13
5Guaranteeterms
Husqvarna AB guarantees this product’s functionality for a period of two
years (from date of purchase). The guarantee covers serious faults rela-
ting to materials or manufacturing faults. Within the guarantee period,
we will replace the product or repair it at no charge if the following terms
are met:
• The robotic lawnmower and the charging station may only be used
in compliance with the instructions in this Operator’s Manual.
• Users or non-authorised third parties must not attempt to repair the
product.
Examples of faults which are not included in the guarantee:
• Damage caused by water seepage from underneath the robotic
lawnmower. This damage is normally caused by cleaning or irriga-
tion systems or holes/hollows in the working area when pools of
water are formed when it rains.
• Damage caused by lightning.
• Damage caused by improper battery storage or battery handling.
• Damage caused by using a battery that is not aHusqvarna AB
original battery.
• Damage to the loop wire.
The blades are seen as disposable and are not covered by the guaran-
tee.
If a fault occurs with your robotic lawnmower, please contact the dealer
(see Memo on page 2 for further instructions). Please have your receipt
and product serial number to hand for quicker assistance.
6Maintenance
6.1Cleaning
It is important to keep the robotic lawnmower clean. Arobotic lawnmo-
wer with a lot of grass stuck to it will nd itharder to travel up slopes,
perform worse and be exposed to greater wear and tear. For better ope-
rating reliability and longer service life: check and clean the robotic lawn-
mower regularly and replace worn parts if necessary. It is recommended
to clean using a soft brush.Knivar ses som förbrukningsvara och omfat-
tas inte heller av garantin.
To reduce the risk of damage to electrical components in the robotic
lawnmower and its charging station, we recommend that all connections
to the charging station are disconnected (power supply, boundary wire
and guide wires) if there is a risk of a thunderstorm.
6.2Chargingstation
Store the charging station and transformer indoors. The boundary loop
and the guide wire can be left in the ground. The ends of the wires
should be protected from damp by connecting them to an original coup-
ler or putting them in a container with grease for instance. If it is not pos-
sible to store the charging station indoors, the charging station must be
connected to the mains, the boundary wire and the guide wires the
entire winter.
6.3Battery
The battery is maintenance-free, but has a limited service life of 2 to 4
years. Battery service life is dependent on the length of the season and
how many hours a day the robotic lawnmower is used. A long season or
many hours of use per day means that the battery must be replaced
more regularly.
For more detailed information on maintenance, please see the complete
Operator’s manual on the attached DVD.
7Troubleshooting
In case of malfunction, a message appears on the display. For more
detailed inrmation on messages that can be shown, see. see the com-
plete Operator’s manual on the attached DVD.
More suggestions for steps to take in the event of malfunction or symp-
toms can be found on www.automower.com. If the same message
appears often or It you still cannot nd the reason for the fault, contact
your dealer.
Breaks in the loop wire are usually the result of unintentional physical
damage to the wire such as when gardening with a shovel. Breaks can
also be due to the wire being stretched excessively during installation. A
wire break can be located by gradually halving the distance of the loop
where the break may have occurred until there is only a very short sec-
tion of the wire left., see the complete Operator’s manual on the
attached DVD for instructions.
8Environmentalinformation
The symbol on the Husqvarna robotic lawnmower or its packaging indi-
cates that this product cannot be treated as domestic waste. It should
instead be left at a suitable recycling centre to recycle its electronic com-
ponents and batteries.
On Automower® 320/330X the batteries are encased in the chassis of
the robotic lawnmower. To access the batteries, the chassis must be dis-
mantled. Consult your dealer for removal.
By ensuring that this product is taken care of correctly, you can help to
counteract the potential negative impact on the environment and people
that can otherwise result through the incorrect waste management of
this product.
For more detailed information about recycling this product, contact your
municipality, your domestic waste service or the shop from where you
purchased the product.
IMPORTANTINFORMATION
Neveruseahigh-pressurewasherorevenrunningwaterto
cleantheroboticlawnmower.Neverusesolventsforcleaning.
ENGLISH

9TechnicalData
Data Automower®305 Automower®308 Automower®320 Automower®330X
Dimensions
Lenght 55 cm 55 cm 72 cm 72 cm
Width 39 cm 39 cm 56 cm 56 cm
Height 25 cm 25 cm 31 cm 31 cm
Weight 6,4 kg 6,4 kg 11,8 kg 13,2 kg
Electricalsystem
Battery Special Lithium-Ion
battery, 18 V/1,6 Ah
Special Lithium-Ion
battery, 18 V/1,6 Ah
Special Lithium-Ion
battery, 18 V/3.2Ah
Special Lithium-Ion
battery, 18 V/6.4Ah
Transformer 100-240 V / 28 V 100-240 V / 28 V 100-240 V / 28 V 100-240 V / 28 V
Lowvoltagecablelength 10 m 10 m 10 m 10 m
Meanenergyconsumptionat
maximumuse
9 kWh/month for a
working area of 500 m2
14 kWh/month for a
working area of 800 m2
30 kWh/month for a
working area of 2,200 m2
43 kWh/month for a
working area of 3,200 m2
Chargecurrent 1 A DC 1,5 A DC 2,1 A DC 4,2 A DC
Averagechargingtime 80–100 minutes 60–80 minutes 50–70 minutes 50–70 minutes
Averagemowingtime 50–70 minutes 50–70 minutes 50–70 minutes 130–170 minutes
Noiseemissions*
Measurednoiselevel 58 dB (A) 61 dB (A) 56 dB (A) 56 dB (A)
Guaranteednoiselevel 61 dB (A) 63 dB (A) 58 dB (A) 58 dB (A)
Mowing
Cuttingsystem Three pivoted cutting
blades
Three pivoted cutting
blades
Three pivoted cutting
blades
Three pivoted cutting
blades
Blademotorspeed 2,900 rpm 2,900 rpm 2,300 rpm 2,300 rpm
Powerconsumptionduring
mowing
20 W +/- 20 % 20 W +/- 20 % 30 W +/- 20 % 30 W +/- 20 %
Cuttingheight 2–5 cm 2–5 cm 2–6 cm 2–6 cm
Cuttingwidth 17 cm 17 cm 24 cm 24 cm
Narrowestpossiblepassage 60 cm 60 cm 60 cm 60 cm
Maximumangleforcutting
area
25% 25% 45% 45%
Maximumanglefor
boundarywire
20% 20% 20% 20%
Maximumlengthboundary
wire
400 m 400 m 800 m 800 m
Maximumlengthguidewire 400 m 400 m
Workingcapacity 500 m2 +/- 20 % 800 m2 +/- 20 % 2200 m2 +/- 20 % 3200 m2 +/- 20 %
IP-classication
Roboticlawnmower IPX4 IPX4 IPX4 IPX4
Chargingstation IPX1 IPX1 IPX1 IPX1
Transformer IPX4 IPX4 IPX4 IPX4
* Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 200/14/EC. The guaranteed sound power level
includes variation in production as well as variation from the test code with 1-3 dB(A).
Husqvarna Group AB does not guarantee full compatibility between the robotic lawnmower and other types of wireless systems such as remote con-
trols, radio transmitters, hearing loops, underground electric animal fencing or similar.
ENGLISH
English - 14

English - 15
10ECDeclarationofConformity
10.1ECdeclarationofconformity(OnlyapplicabletoEuropeanversions)
HusqvarnaAB, SE-561 82 Huskvarna, Sweden, tel.: [phone], hereby declares under sole responsibility that the robotic lawnmowers Hus-
qvarnaAutomower®305,Automower®308,HusqvarnaAutomower®320 andAutomower®330X with serial numbers dating year 2014 week
40 and onwards (the year and week is clearly stated on the rating plate, followed by the serial number), comply with the requirements of the
COUNCIL’S DIRECTIVE:
• Directive “relating to machinery” 2006/42/EC.
• Particular requirements for robotic battery powered electrical lawnmowers IEC60335-2-107:2012.
• Directive on ”restriction of use of certain hazardous substances” 2011/65/EU.
• Directive “relating to noise emissions from outdoor equipment” 2000/14/EU.
See also the Technical Data chapter for information regarding noise emissions and the cutting width. The registered body 0404, SMP Svensk
Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has issued a report regarding the assessment of conformity according
to annex VI to the Council’s Directive of May 8, 2000 “relating to noise emissions into the surroundings” 2000/14/EC. The certicate is numbe-
red: 01/901/176 for Automower® 305, 01/901/205 för Automower® 308, 01/901/201 for Automower® 320/330X.
• Directive “relating to electromagnetic compatibility” 2004/108/EC and applicable supplements.
The following standards have been applied:
-61000-6-3:2007/A1:2011
-61000-6-1:2007
-EN62233:2008
Huskvarna, 28 September 2014
Tom Söberg, Director of R&D Electric, Husqvarna robotic lawnmowers
(Authorized representative for Husqvarna AB and responsible for technical documentation)
ENGLISH

1Introducciónyseguridad
1.1Introducción
Este manual de usuario contiene información importante resumida
acerca del robot cortacésped. En el DVD adjunto encontrará el manual
de usuario completo, donde podrá obtener más información sobre
temas como, por ejemplo, instalación, menús, ejemplos de jardín, man-
tenimiento y resolución de problemas. Póngase en contacto con el dist-
ribuidor si desea solicitar el manual completo en formato impreso.
Como complemento de este manual de usuario, hay más información
en el sitio web de Automower®: www.automower.com. Encontrará más
materiales de ayuda y guía para su uso.
Husqvarna AB trabaja constantemente para perfeccionar sus productos
y se reserva, por lo tanto, el derecho a introducir modicaciones en la
construcción, el diseño y el funcionamiento sin previo aviso.
En el manual de usuario encontrará el siguiente sistema para simplicar
su uso:
• El texto escrito en cursiva es el texto que aparece en la pantalla
del robot cortacésped o es una referencia a otro apartado del
manual de usuario.
• Las palabras escritas en negrita representan los botones del
teclado del robot cortacésped.
• Las palabras escritas en MAYÚSCULAS y cursiva hacen referen-
cia a la posición del interruptor principal y a los diferentes modos
de funcionamiento disponibles en el robot cortacésped.
1.2Símbolosqueaparecen
enelproducto
Puede encontrar estos símbolos en el robot
cortacésped. Estúdielos con atención.
Lea detenidamente el manual de instruccio-
nes y asegúrese de entender su contenido
antes de utilizar el robot cortacésped. Las
advertencias y las instrucciones de seguri-
dad del presente manual de instrucciones
deben seguirse estrictamente para utilizar el
robot cortacésped de forma segura y ecaz.
El robot cortacésped solo puede arrancar
cuando el interruptor principal está en la
posición 1 y se ha introducido el código PIN
correcto. Seleccione la posición 0 del inter-
ruptor principal antes de llevar a cabo cual-
quier trabajo de inspección o mantenimiento.
Manténgase a una distancia segura del robot
cortacésped durante su funcionamiento.
Mantenga alejados las manos y los pies de
las cuchillas giratorias. Nunca acerque las
manos o los pies, ni los introduzca debajo
del cuerpo del robot cortacésped cuando
esté en marcha.
INFORMACIÓNIMPORTANTE
Leadetenidamenteelmanualdeinstruccionesyasegúrese
deentendersucontenidoantesdeutilizarelrobot
cortacésped.
Nunca utilice un equipo de limpieza de alta pre-
sión ni agua corriente para limpiar el robot cor-
tacésped.
No se monte encima del robot cortacésped.
Este producto cumple con las directivas CE vigentes.
Emisiones de ruido al entorno. Las emisiones del pro-
ducto se indican en el capítulo Datos técnicos y en la
placa de características.
No está permitido desechar este producto con los resi-
duos normales del hogar al nal de su vida útil. Asegú-
rese de que el producto se recicla de acuerdo con las
normativas locales.
El chasis tiene componentes sensibles a descargas
electrostáticas (ESD). Además, el chasis es una pieza
importante del diseño del robot cortacésped y se debe
volver a sellar de manera profesional si el producto va a
ser utilizado en exteriores. Por este motivo, el chasis
solo podrá ser abierto por técnicos de mantenimiento
autorizados. Un sello roto puede invalidar la totalidad o
parte de la garantía.
El cable de baja tensión no se debe acortar, alargar ni
dividir.
No utilice una recortadora cerca del cable de baja ten-
sión. Tenga cuidado al recortar bordes donde estén colo-
cados los cables.
1.3Símbolosqueaparecenenelmanualde
usuario
• Un recuadro de advertencia indica que se corre el riesgo de sufrir
daños personales, especialmente si no se siguen las instrucciones.
• Un recuadro de información advierte sobre el riesgo de sufrir daños
materiales, especialmente si no se siguen las instrucciones. El recuadro
también se usa cuando existe riesgo de error por parte del usuario.
1.4Instruccionesdeseguridad
Uso
Este robot cortacésped se ha diseñado para cortar césped en supercies
niveladas y exteriores. Solo se puede utilizar con el equipo recomendado
por el fabricante. Todos los demás usos son inadecuados. Se deben
seguir con precisión las instrucciones del fabricante en lo que respecta al
funcionamiento, el mantenimiento y la reparación.
Nunca utilice el robot cortacésped cuando haya personas, especialmente
niños, o mascotas en la zona de corte. Si hay personas o animales domé-
ADVERTENCIA
Texto
INFORMACIÓNIMPORTANTE
Texto
ADVERTENCIA
Elrobotcortacéspedpuedeserpeligrososiseutiliza
deformaincorrecta.Mantengaalejadoslasmanosy
lospiesdelascuchillasgiratorias.Nuncaacerquelas
manosolospies,nilosintroduzcadebajodelcuerpo
cuandoestéenmarcha.
SPANISH
Spa-
nish - 16
ADVERTENCIA
Nuncautiliceelrobotcortacéspedcuandohayaper-
sonas,especialmenteniños,omascotasenlazonade
corte.

Spanish - 17
sticos en la zona de corte se recomienda programar el cortacésped para
su uso durante horas en las que el área está libre de personas, por ejem-
plo, durante la noche.
Este robot cortacésped solamente lo podrán manejar, mantener y reparar
aquellas personas que conozcan perfectamente sus reglas de seguridad
y características especiales. Lea detenidamente el manual de instruccio-
nes y asegúrese de entender su contenido antes de utilizar el robot corta-
césped.
No está permitido modicar el diseño original del robot cortacésped.
Todas las modicaciones se harán por su cuenta y riesgo.
Compruebe que no haya piedras, ramas, herramientas, juguetes u otros
objetos en el césped que puedan dañar las cuchillas. Los objetos que
hay en el césped también pueden atascar el robot cortacésped y es
posible que necesite ayuda para extraer el objeto antes de que el corta-
césped pueda seguir funcionando.
Arranque el robot cortacésped según se indica en las instrucciones.
Cuando el interruptor principal esté en la posición 1, asegúrese de man-
tener alejados las manos y los pies de las cuchillas giratorias. Nunca
introduzca las manos ni los pies debajo del cuerpo del robot cortacésped.
Nunca levante ni mueva el robot cortacésped cuando el interruptor prin-
cipal esté en la posición 1.
No permita que nadie utilice el robot cortacésped sin saber cómo funci-
ona o actúa.
Nunca se puede permitir que el robot cortacésped colisione con perso-
nas u otras criaturas vivas. Si una persona u otro ser vivo se encuentra
en el recorrido del cortacésped se debe detener inmediatamente la
máquina.
No coloque ningún objeto encima del robot cortacésped o de su esta-
ción de carga.
No permita que el robot cortacésped funcione con un disco de corte o
cuerpo defectuosos. Nunca debería utilizarse con cuchillas, tornillos,
tuercas o cables dañados.
No utilice el robot cortacésped si el interruptor principal no funciona.
Apague siempre el robot cortacésped mediante el interruptor principal
cuando no se esté utilizando. El robot cortacésped solo puede arrancar
cuando el interruptor principal está en la posición 1 y se ha introducido
el código PIN correcto.
El robot cortacésped nunca debe ser utilizado al mismo tiempo que un
aspersor. En este caso, emplee la función de temporizador para que el
cortacésped y el aspersor nunca funcionen simultáneamente.
Husqvarna AB no garantiza la total compatibilidad entre el robot corta-
césped y otro tipo de sistemas inalámbricos, como mandos a distancia,
radiotransmisores, bucles magnéticos, vallas eléctricas enterradas para
animales o similares.
La alarma incorporada es muy ruidosa. Tenga cuidado, especialmente
si el robot cortacésped se utiliza en interiores.
Conexióndeltransformador
Tenga en cuenta lo siguiente al planear la ubicación del transformador:
• Cerca de la estación de carga
• Protección contra la lluvia
• Protección de la luz solar directa
Si el transformador está conectado a una toma de corriente exterior,
debe ser apta para el uso en exteriores. Se recomienda usar un inter-
ruptor de toma de tierra cuando se conecte el transformador a la toma
de corriente.
El cable de voltaje bajo no debe acortarse ni alargarse bajo ningún con-
cepto. Coloque el cable de voltaje bajo de modo que las cuchillas del
disco de corte no entren nunca en contacto con él.
No monte nunca el transformador a una altura en la que exista el riesgo
de que se pueda sumergir en el agua (a una distancia mínima de 30 cm
del suelo). No se puede colocar el transformador en el suelo.
Transporte
El embalaje original debe ser utilizado para transportar el robot cortacé-
sped en distancias largas.
Para moverse de forma segura desde la zona de trabajo y dentro de
ella:
1. Pulse el botón STOP para detener el robot cortacésped. Si está
seleccionado el nivel medio o alto de seguridad, debe introducir el
código PIN. El código PIN contiene cuatro dígitos y se selecciona
cuando arranca el robot cortacésped por primera vez.
2. Coloque el interruptor principal en la posición 0.
3. Transporte el robot cortacésped por el asa con el disco de corte
separado del cuerpo.
Automower 320/330X
Automower 305/308
Automower 320/330X
Automower 305/308
INFORMACIÓNIMPORTANTE
Nolevanteelrobotcortacéspedmientrasestéaparcadoenla
estacióndecarga.Estopodríadañarlaestacióndecargaoel
robotcortacésped.PulseSTOPytiredelrobotcortacésped
paraextraerlodelaestacióndecargaantesdelevantarlo.
SPANISH

Mantenimiento
ADVERTENCIA
Aldarlelavueltaalrobotcortacésped,elinterrup-
torprincipaldebeestarsiempreenlaposición0.
Elinterruptorprincipaldebeestarenlaposición0
durantelarealizacióndecualquiertrabajoenel
chasisdelcortacésped,comosonsulimpiezayla
sustitucióndelascuchillas.
Inspeccione el robot cortacésped cada semana y sustituya cualquier
pieza dañada o desgastada. Deberán realizarse las siguientes tareas en
las inspecciones semanales:
1. Limpie la estación de carga para retirar el césped, las hojas, las
ramas y otros objetos que impidan el acoplamiento del robot
cortacésped a la estación de carga.
2. Coloque el interruptor principal en la posición 0 y póngase guantes
protectores.
3. Dé la vuelta al robot cortacésped. Compruebe lo siguiente:
• Limpie las ruedas y los ejes. Si hay hierba en las ruedas motri-
ces, puede verse afectado el funcionamiento en pendientes.
• Limpie el cuerpo, el chasis y el sistema de corte. El césped, las
hojas y otros objetos que sobrecargan el producto afectan a su
rendimiento.
• Compruebe que todas las cuchillas de corte están en perfecto
estado. Compruebe también que las cuchillas de corte puedan
girar libremente. Aunque las cuchillas de corte estén en buen
estado, deberán sustituirse periódicamente para obtener resulta-
dos de corte óptimos y reducir el consumo energético. Sustituya
todas las cuchillas y tornillos al mismo tiempo, si fuera necesario,
para que las piezas giratorias se mantengan equilibradas.
ADVERTENCIA
Utilicesiemprecuchillasytornillosoriginales.Si
únicamentesustituyelascuchillasyvuelveautilizar
eltornillo,puedeproducirseundesgastedeeste
duranteelcorte.Lascuchillaspuedensalirdespedi-
dasdedebajodelcuerpoycausardañosgraves.
SPANISH
Spanish - 18

2Presentación
2.1Componentes
Automower®305/308
Los números de la ilustración representan:
1. Cuerpo
2. Cubierta de la pantalla, teclado y ajuste de la altura de corte
3. Botón de parada/enganche para abrir la cubierta
4. Pletinas de contacto
5. LED para comprobación del funcionamiento de la estación de
carga, cable delimitador y cable guía
6. Estación de carga
7. Asa de transporte
8. Cubierta de la batería
9. Disco de corte
10. Caja de chasis con sistema electrónico, batería y motores
11. Interruptor principal
12. Rueda trasera
13. Pletina de carga
14. Teclado
15. Pantalla
16. Cable de lazo para lazo delimitador y cable guía
17. Cable de voltaje bajo
18. Conector para enchufar el cable de lazo a la estación de
carga
19. Tornillos para jar la estación de carga
20. Transformador (el aspecto del transformador puede
variar en función del mercado)
21. Grapas
22. Galga para facilitar la instalación del cable delimitador (la
galga está separada de la caja)
23. Acoplador para el cable de lazo
24. Manual de usuario y guía rápida
25. Cuchillas adicionales
26. Etiqueta de alarma
27. DVD-ROM con manual de instrucciones completo
28. Placa de características
1
3
2
16
17
6
5
4
12
13
11
19
20
21 22 23 24
18
8
9
10
7
25 26 27
14
28
15
SPANISH
Spanish - 19

Automower®320/330X
Los números de la ilustración representan:
1. Cuerpo
2. Tapa de la pantalla y del teclado
3. Botón de parada/enganche para abrir la escotilla
4. Soporte para accesorios, p. ej. faros (no disponible en el
Automower® 320)
5. Rueda delantera
6. Ruedas traseras
7. LED para comprobación del funcionamiento de la estación de
carga, cable delimitador y cable guía
8. Pletinas de contacto
9. Botón de estacionamiento (no disponible en el Automower®
320)
10. Estación de carga
11. Placa de características
12. Pantalla
13. Teclado
14. Sistema de corte
15. Caja de chasis con sistema electrónico, batería y motores
16. Asa
17. Interruptor principal
18. Disco de corte
19. Plancha protectora
20. Transformador
21. Cable de lazo para lazo delimitador y cable guía
22. Cable de voltaje bajo
23. Soportes
24. Conector para el cable de lazo
25. Tornillos para jar la estación de carga
26. Galga para facilitar la instalación del cable delimitador (la
galga está separada de la caja)
27. Acopladores para el cable de lazo
28. Manual de usuario y guía rápida
29. Etiquetas para cables
30. Cuchillas adicionales
31. Etiqueta de alarma
32. DVD-ROM con manual de instrucciones completo
Funcionamiento
1
10
7
5
4
18
19
14
15 17
16
6
2
20
22
23
24
25 26 27 28
29
9
3
11
13
12
21
8
30
31
32
SPANISH
Spanish - 20