HUSTLER 121696 User manual

INSTRUCTION
121697
REV. A
ENGINE GUARD KIT
PART NUMBER: 121696
PACKING LIST:
Listed below are parts included in this kit. If any parts are missing or damaged, please contact the
Hustler®Parts Department. Retain these instructions for replacement parts.
INDEX NO. PART NO. DESCRIPTION QTY.
1 552968 ENGINE GUARD (WITH DECAL) 1
2 029629 CS .375-16 X .75 HX FLK 4
3 016899 NT .375-16 HX FLK ZNYC 4
Allow the engine and muffler to cool before beginning installation.
2
3
1
WARNING

ENGINE GUARD KIT 121697 REV. A 2
ASSEMBLY:
1. Park the mower on a solid, level surface; set the park brakes; shut-off the engine; and
remove the ignition key.
2. Remove the existing hardware as shown in FIG. 1.
3. Attach the engine guard to the rear of the mower frame using the hardware provided,
as shown in FIG. 1. The right and left sides are similar.
NOTE: Make sure the engine guard does not make contact or interfere with the engine air
cleaner.
FIG. 1
Engine guard
NT .375-16
(flanged)
Existing
hardware
CS .375-16 X .75
Existing hardware