hydrafacial PRO User manual

VER:1.0
USER MANUAL
HydroFacial PRO

~1~~1~
This product does not belong to medical, please don’t use for disease treatment!
Dear user:
Thanks for using our company's products, in order to fully make use of the products,
we sincerely suggests follow:
Please read the instruction in detail and keep it well for further reading and
consulting.
Please follow the instruction to fit and operate the machine correctly.
Please do not remove and change any accessories of the machine.
It forbids others to open and remove the mainframe except the authorized people in
the company.
It forbids others to change and maintain the machine except the professional
people.
Please contact us if there is any trouble during operation.
Warning
◆◆
◆◆
◆◆
◆◆
◆◆
◆◆

~2~
Parts Introduction
Accessories
Any part of instrument made of PMMA material (for example: accessories shelf,
panel, transparent handles,etc.). Do not use alcohol or corrosive solvent to wipe clean.
1.LCD touch screen
2.Function selecting knob
& Confirming button
3.Vacuum adjusting knob
4.Water level adjusting knob
5.Air output jack
6.Water output jack
7.Wastewater recycling bottle buckle
8.Wastewater recycling bottle
9.NO A Liquid Products bottle
10.Wash-out valve of wastewater
recycling bottle
11. NO B Liquid Products bottle
12. NO C Liquid Products bottle
13. NO D Liquid Products bottle
14. Power supply line socket
15. Power switch
Vacuum dermabrasion handle
Vacuum dermabrasion working heads
Vacuum SPA handle
Vacuum SPA working heads
1
2
3
4
5
6
7
8
9
10
12
13
11
14
15

~3~
1.Put accessories well and connect them to the host.
( 1 )I ns er t t h e bi g d i am et er tr an sp ar en t t ub e of Va cu um
dermabrasion handle or Vacuum SPA handle into [5] jack.
(2)Insert the small diameter transparent tube of Vacuum
dermabrasion handle or Vacuum SPA handle into [6] jack.
2.Insert the plug of Power supply line into [14] socket, turn on
Power switch [15], the system enter into in standby states as
(Fig 1).
3.In the interface as (Fig 1) shows:
(1)Turn [2] Function selecting knob, when the cursor “ ” move to
“Picture” , Press [2] confirming button to enter interface as (Fig 2).
(2)Turn [2] Function selecting knob, when the cursor “ ” move to “SET” , then press [2]
confirming button to enter “set interface” . “Basic setting” choose output language.
When the cursor move to “ ”, return to interface as (Fig 1).
NOTICE: “Advanced setting” is only for manufacturer, Users do not use.
(Fig 1)
Basal Operation

~4~
CLEAN AND SCRUB OPERATION
1.Clean skin and make it dry.
2.Put appropriate liquid products into liquid bottle A.
3.In interface as (Fig 2) shows, turn [2] Function selecting knob,
when the cursor “ ” move to “CLEAN AND SCRUB”, press [2]
confirming button to enter into interface as (Fig 3).
4.Set work time. The system default is 30minutes, turn [2] Function
selecting knob, when the cursor “ ” move to “Work time”, press
[2] confirming button, then turn [2] Function selecting knob to
adjust, the range is 1 to 120 minutes.
5.Accor ding treated parts to choose appropriate Vacuum
dermabrasion working heads, beauticians connect the Vacuum
dermabrasion working head with Vacuum dermabraion handle,
turn [2] Function selecting knob to “Start” , press [2] confirming
button, the system begin working. If you want to pause during
operation, press it again.
6.Turn [3] Vacuum adjusting knob to adjust dermabrasion vacuum
intensity, the pressure is strong while turning it to the clockwise,
the intensity number is constantly changing. The beautician
should consider the nursing part and make sure the guests can
accept the pressure.
.
The system will pause automatically if the setting time is over.
press any key to continue as (Fig 4) .
9.When the cursor move to “ ”, return to interface as (Fig 2).
PEELING SURFACE OPERATION
1.Clean skin and make it dry.
2.Put appropriate liquid products into liquid bottle B.
3.In interface as (Fig 2) shows, Choose “PEELING SURFACE” to
enter into interface as (Fig 5).
4.Set work time.
5.According treated parts to choose appropriate Vacuum dermabrasion
working heads, beauticians connect the Vacuum dermabrasion working head with
Vacuum dermabraion handle, turn [2] Function selecting knob to “Start” , press [2]
confirming button, the system begin working. If you want to pause during operation,
7 Choose the treatment area, and beautician hold the Vacuum
dermabrasion handle to move closely on skin back and forth, with
the finger moves with it.
8.
Vacuum Dermabrasion
(Fig 2)
(Fig 3)
(Fig 4)

~5~
press it again.
6.Turn [3] Vacuum adjusting knob to adjust dermabrasion vacuum
intensity, the pressure is strong while turning it to the clockwise,
the intensity number is constantly changing. The beautician
should consider the nursing part and make sure the guests can
accept the pressure.
.
The system will pause automatically if the setting time is over.
press any key to continue.
EXTRACTION OPERATION
1.Clean skin and make it dry.
2.Put appropriate liquid products into liquid bottle C.
3.In interface as (Fig 2) shows, Choose “EXTRACTION” to enter
into interface as (Fig 6).
4.Set work time.
5.Acco rding treat ed parts to choose appropri ate Vacuu m
dermabrasion working heads, beauticians connect the Vacuum
dermabrasion working head with Vacuum dermabraion handle,
turn [2] Function selecting knob to “Start” , press [2] confirming
button, the system begin working. If you want to pause during
operation, press it again.
6.Turn [3] Vacuum adjusting knob to adjust dermabrasion vacuum
intensity, the pressure is strong while turning it to the clockwise,
the intensity number is constantly changing. The beautician
should consider the nursing part and make sure the guests can
accept the pressure.
.
The system will pause automatically if the setting time is over.
press any key to continue.
HIDRATACIN AND PROTECTION OPERATION
1.Clean skin and make it dry.
2.Put appropriate liquid products into liquid bottle D.
3.In interface as (Fig 2) shows, Choose “HIDRATACIN AND PROTECTION” to enter into
interface as (Fig 7).
7 Choose the treatment area, and beautician hold the Vacuum
dermabrasion handle to move closely on skin back and forth, with
the finger moves with it.
8.
7 Choose the treatment area, and beautician hold the Vacuum
dermabrasion handle to move closely on skin back and forth, with
the finger moves with it.
8.
(Fig 5)
(Fig 6)
(Fig 7)

~6~
4.Set work time.
5.Accor ding treated parts to choose appropriate Vacuum
dermabrasion working heads, beauticians connect the Vacuum
dermabrasion working head with Vacuum dermabraion handle,
turn [2] Function selecting knob to “Start” , press [2] confirming
button, the system begin working. If you want to pause during
operation, press it again.
6.Turn [3] Vacuum adjusting knob to adjust dermabrasion vacuum
intensity, the pressure is strong while turning it to the clockwise,
the intensity number is constantly changing. The beautician
should consider the nursing part and make sure the guests can
accept the pressure.
.
The system will pause automatically if the setting time is over.
press any key to continue.
EXPLANATION
1.In interface as (Fig 2) shows, Choose “EXPLANTION” to enter
into interface as (Fig 8).
Step1. Cleansing and exfoliation.
By removing dead skin cells healthy new is revealed.
Step2. Superficial peeling.
The action of light peeling softens pore impurity without irritation.
Step3. Extraction.
Instantly blackheads and whiteheads are removed painlessly.
Step4. Hydration.
The skin is washed with a solution rich in antioxidants and highly moisturizing
hyaluronic acid.
Protection.
Daily use of essential commodities HydraFacial helps maintain and protect the results.
Cleaning the Wastewater recycling bottle
7 Choose the treatment area, and beautician hold the Vacuum
dermabrasion handle to move closely on skin back and forth, with
the finger moves with it.
8.
If the system appeal the prompt “The recycling bottle was full, please clean it”. please
check [8] Wastewater recycling bottle wether full, if it was full, please clean them
immediately. You could pull up buckle of Wastewater recycling bottle remove it and clean
it. You can also insert a tube into [10]Wash-out valve of wastewater recycling bottle to
make the water flowing out.
(Fig 8)
(Fig 9)

~7~
SPA Dermabration
Operating steps
1.Clean skin deeply.
2.Put the liquid products into the liquid bottle A, B, C or D.
3.In interface as (Fig 2) shows, Choose the function: CLEAN AND SCRUB, PEELING
SURFACE, EXTRACTION or HIDRATACIN AND PROTECTION.
4.According treated parts to choose appropriate Vacuum SPA working head. Beauticians
connect it with Vacuum SPA handle.
5.Turn [2] Function selecting knob to “Start” , press [2] confirming button, the system
begin working. if you want to pause during operation, press it again.
6.Adust Vacuum SPA pressure intensity. Press the Crystal dermabrasion cap with your
finger before adjust, and then turn [3] Vacuum adjusting knob the pressure is strong
while turning it to the clockwise, the intensity number is constantly changing. The
beautician should consider the nursing part and make sure the guests can accept the
pressure.
7.Turn [4] Water level adjusting knob to adjust water flux, the flux is big while turning it to
the counter clockwise, the intensity number is constantly changing.
8.
The system will pause automatically if the setting time is over. press any key to
continue.
10.When the cursor move to “ ”, return to interface as (Fig 2).
1.
Wastewater recycling bottle if it was full
Beautician hold the Vacuum SPA handle on skin for a while until the water flow into the
working head, and then drop some water on skin by points, to make the skin surface
wet, and move the it on skin back and forth.
9.
Do not use on wound skin.
2.Pour out the water in the waste recycling bottle in time to avoid damage caused by
overflowing.
3.Different size of working heads can be flush with water directly, then soaked with 75%
alcohol.
4.Clean the
Cautions
Cautions
4.Another Vacuum dermabrasion care must be in 30 minutes later.
1.Do not to use when there is sensitive skin, swelling, injury, inflammation.
2.Keep your skin in a good condition after treatment, use care products which are gentle
and no harm, pay more attention to sun block.
3.Do not do shaving or use scrub until three days later.

~8~
Forbidden Group
1.People with heart disease or high blood pressure, or configured cardiac pacemaker.
2.Patients with acute inflammation, asthma, deep vein thrombosis, thyroncus, cancer.
3.People with hemorrhagic disease, trauma or who is bleeding.
4.Pregnant women
5.Medical Plastic parts, or parts with artificial in filling inside.
6.People with metal inside the body(include metallic tooth)
7.Patient with skin inflammation or with edema.
8.People with an abnormal immune system.
9.Numb or insensitive to heat.
AC 110V/60Hz
Technical Parameters
Input Voltage: AC 220V/50Hz
Output Power: 250VA
1.Host
2.Vacuum dermabrasion handle
3.Vacuum dermabrasion working heads
4.Vacuum SPA handle
5.Vacuum SPA working heads
6.Liquid bottle
7.Waste water recycling bottle
8.Power supply line
9.User manual
Packing List
1SET
1PC
1BOX(9PCS)
1PC
1SET(8PCS)
4PCS
1PC
1PC
1COPY

~9~
1.The following symptoms were forbidden to use
(1)Patients who used by Heart rate regulator, cardiac pacemaker, ECS;
(2)The use of artificial bone; Patients with silicosis;
(3)Drunk or high fever patients;
(4)Patients with higher sensitivity mental disease and epilepsy patients
(5)Patients with no independent expression consciousness and can not take
care of themselves.
(6)Patients with metal materials in body (including metal teeth), pregnant
women, cachexia, malignant tumor.
(7)Severe hypertension and severe patients with cardiovascular and
cerebrovascular disease.
(8)Patients with renal failure.
(9)Patients with severe infection
2.The following please use under the guidance of professionals
(1)Women during menstruation;
(2)Children;
(3)Hemorrhagic disease or trauma, inflammation, skin disease, skin infection;
(4)Patients with feeling numb, no response to cold and heat;
(5)The immune system has defects, scar formation history, physical disease;
(6)The people who has taken face-lifting or her body has artificial thing.
Symbols and Meanings
*Things damage refers to housing, property, livestock and pet damage.
Warning Symbol
Danger
Danger
Waning
Waning
Attention
Device exists high pressure risk of high voltage output terminals!
If used incorrectly will cause personnel injury!
If used incorrectly will cause personnel injury or damage to the goods!
If used incorrectly will cause possibility ill of death or serious injury!
If used incorrectly will bring the risk of death or serious injury!
Meaning
Contraindications
Danger
Warning

~10~
1.First check the host, accessories, power supply line is broken or not before use.
2.Start system, in addition to television, refrigerator, Do not turn on electrical power device at same
time.
3.Before use, please take the hearing aid, electronic wristwatch, magnetic card, mobile phone and
other things off first. Pay attention to the child's care to avoid touching.
4.During the using process, drink more water based on your physical.
5.In case of happen special circumstances or accident, please immediately stop using and consult
professionals.
6.Patients with following medical electrical device cannot use this system at the same time.
——Patients who implantable cardiac pacemaker,heart rate regulator, other electronic devices.
——Artificial heart lung device and other device to sustain life.
——Patients with ECG scanner device .
——Patients with metal materials in body (including metal teeth), using artificial bone.
7.The following user should be agreed by the professionals before using this device.
——Patients with acute disease.
——Patients with malignant tumor.
——Patients with Infectious disease.
——Pregnancy women.
——Cardiac disease.
——Patients with high fever.
——Being treated or physical abnormalities.
8.Please immediately turn off power supply, stop using if following abnormal situation happened.
(1)Water and other matter into the host.
(2)Host, power supply line, accessories line and plug etc. occur the abnormal heating, leakage.
(3)The sound to be unusual.
(4)Abnormal smell, smoke.
(5)Any accessories damaged.
(6)Natural disasters and earthquake, the sudden thunder
9.When the treatment is finished, please cut off the power supply, be sure to unplug the power plug
from the power socket.
10.Please check the power supply line, accessories line carefully every time before use, if found
damaged, you should stop using and replacing it.
11.Transportation and storage conditions: Transport according to the requirements of the order
contract, the transport process should be to prevent sun and rain; packaged equipment should be
stored in relative humidity of not more than 80%, no corrosive gas and ventilated room.
12.The warning mark produce in the specification, its purpose is to enable you to safely and correctly
using this device, and to prevent you and others to injury.
Attention

~11~
1.Appliances and medical equipment close to the machine may be resulting in operational failure
due to interference.
2.Prohibit use of the equipment in the following environment
3.If there comes a failure, please shut down the power immediately, and send it to the distributor
or manufacturer for maintenance. Do not repair by yourself.
4.Exclusion of liability.
The Company is not responsible for the following circumstances:
(1)If fire, earthquake, war occurred;
(2)The fault of the user, operator error;
(3)Damage caused by using other method(not included in the use manual).
(4)Operate without the manual's guide.
5.After using the machine for over 40 hours, please take off the dust filter and clean it (If have).
6.Do not make the machine close to the wall, keeping a 30CM space around for cooling.
――Hot and humid environment
――Dusty environment
――Environmental with much smoke or stream
Technical note:
Hardware structure of the machine parts, injection molded parts, and the majority of electronic components,
connectors meet the requirements of the EU and China RoHS directives.Only a few parts as the global technology
limitations that may affect product reliability, and not find a substitute for the toxic and hazardous substances, please
be assured to use, use under normal conditions will not cause health effects on users.
Toxic and hazardous substance in at least one homogeneous materials of the part exceeds the concentration limit
requirement described in SJ/T11363-2006.
Toxic and hazardous substance in all the homogeneous materials of the part is either below the concentration
limit requirement described in SJ/T11363-2006 or is not applicable because the part is not used.
Products to be discarded after use, Please treat in accordance with electronic and information products recovery,
re-use legal regulations.
Held onto the filter
with hands,pull it out
according to cursor.
after cleaning, push
it back.
Hazardous Substances or Elements Contained in the Product
Maintenance
Safety and Environmental Considerations
Part Name
Plastic parts
Metal structures
/decorations
Printed Circuit
Assembly
Power Line
Plug of Power
supply line
Relay
Buzzer
Remark
Toxic and Hazardous Substance or Element
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)