15
OPERATING THE DAH-220 (Stand-alone with headphones)
INSERTING THE DAH-220 INTO A CASSETTE DECK
The following is the correct way to insert the DAH-220 into a cassette deck.
1.Initialize the DSP on the DAH-220 by moving the Slide Switch to the On position and
then press the Play button more than 2 seconds.
2. Due to potential variances in the volume of encoded audio files, the cassette audio output of the
DAH-220 is adjustable. When the unit is first turned on, the volume is set to a medium level of
output. You may adjust the output to a cassette deck by pressing Play (note that the indicator lamp
should be flashing), then adjusting the volume either up (+) or down (-) to suit the desired output to
the cassette deck.
Note : It is possible to adjust the output volume high enough to cause distortion during cassette
audio playback on some cassette decks. Avoid distorted output by matching the volume of
the DAH-220 playback with the FM tuner volume, such as on a car cassette deck.
3. Insert the DAH-220 into the cassette deck, making sure the side marked Front (the side with the
operating buttons) is inserted upward or forward.
4. You may adjust head control switch to ensure optimal tape head alignment. Typical indications of
improper tape head alignment is audio playing only on one side, significantly reduced volume, or
significant extraneous noise coming from player.
5. If no sound is played from the cassette deck or if adjusting tape head control does not improve
audio quality significantly, change the play direction with the auto-reverse button (if applicable)
and flip the DAH-220 cassette so it is facing down.
14
OPERATING THE DAH-220 (Stand-alone with headphones)
OPERATING THE DAH-220 (Stand-alone with headphones)
FOR EQUALIZER FUNCTIONS (while audio is playing)
Desired Operation Buttons Function When Pressed
Power on
Play (hold Play for > 2 sec)
Powers the player on.
Power off
Stop (hold Stop for > 2 sec)
Powers the player off.
Play audio file Press Play Begins to play audio/Restarts from
pause.
Pause audio file
Stop (press stop for < 1 sec)
Pauses audio playback.
Increase Volume Vol + Increases the audio Volume.
Decrease Volume Vol - Decreases the audio Volume.
Previous Track Rew Plays previous audio file.
Next Track F.F. Plays next audio file.
Rewind audio
Rew (hold Rew for > 2 sec)
Rewinds audio at 4X speed as
long as the button is depressed.
Fast Forward Audio F.F. (hold F.F. for > 2 sec)
Advances audio at 4X speed as
long as the button is depressed.
Key Lock
Move Slide Switch to the HOLD
Locks the button functions when
power is on.
Desired Operation
Buttons Function When Pressed
Change Equalizer Play/EQ
Toggles equalizer mode while
audio Mode is playing. (Flat,
Rock, Latin, Dance, Jazz)
The DAH-220 functions can also be controlled by a remote control with an LCD display.(optional
item)
Pause/Power Save Mode
The DAH-220 features a Power Save mode that allows the player to automatically conserve its
battery power when not in use. When the user presses the Stop button for more than 2 seconds,
and/or if the player senses it is not used for 5 minutes, it will automatically enter Power Save mode.
To resume play if the Slide Switch is left in the "On" position, press the Play button twice.
Note : The DAH-220 will resume play from the exact point in the audio track that was playing
when the stop button was pressed. The volume and EQ setting are also memorized. To delete
the previously set Bookmark press VOL+ and VOL- buttons simultaneously while Slide
Switch is in the "REC" position.
position
