Hyundai HSH-P182NDC User manual

Type of contents
1.OPERATIONRANGE 1
2.SPECIFICATION 2
3.INSTALLATION 6
4.ELECTRICALDATA 7
5.CONTROLMODE 10
6. TROUBLE SHOOTING 22
7.CHECKINGCOMPONENTS 27
8.PARTLISTANDEXPLODEVIEW 30
NOTE: The figure、size and parameter of the product may not be identical with the
service manual, please take the actual product as the standard.

1
1. . O OP PE ER RA AT TI IN NG G R RA AN NG GE E
1
Temperature Indoor Air Intake Temp. Outdoor Air Intake Temp
Maximum 32℃D.B./23℃W.B. 43 ℃D.B./26℃W.B.
COOLING Minimum 21℃D.B./15℃W.B. 21 ℃D.B./15℃W.B.
Maximum 27℃D.B./18℃W.B. 24℃D.B./18℃W.B.
HEATING Minimum 20℃D.B/≤15℃W.B -7℃D.B./-8℃W.B.

2
2. . S SP PE EC CI IF FI IC CA AT TI IO ON NS S
2
2-1. Unit specifications
Model No.
Type H/P,ON/OFF
Ratings
Cooling Capacity Btu/h 19000
Heating Capacity Btu/h 20000
Rated Input-Cooling W 1735
Rated Input-Heating W 1624
Moisture Removal L/H.r
Air Circulation m3/h Max 800
EER for Cooling Btu/h.W, W/W 10.95, 3.21
COP for Heating W/W 3.61
Energy Class Cooling A
Energy Class Heatling A
Refrigerant R410a
Refrigerant charge volume g 1550
High(dB (A))
Indoor Unit Noise Level Low(dB (A))
Outdoor Unit Noise Level dB (A)
Power Supply
Voltage, Frequency, Phase V 220-240V~,50Hz,1P
Cooling (A) 8.8
Rated Current Heating (A) 8.2
LRA A 40
System
Compressor type Rotary
Compressor Model No. PA215X2CS-4KU1
Compressor MFG TOSHIBA
Expansion Device Capillary
Evaporator Copper tube and Aluminum Fin
Condenser Copper tube and Aluminum Fin
Connecting Pipe Diameter
Liquid Pipe inch 1/4
Gas Pipe inch 5/8
Other
Indoor Unit 920x313x
NetDimensions WxHxD(mm) Outdoor Unit 830x637x
Indoor Unit
Net Weight (Kg) Outdoor Unit
Indoor Unit 1007X400X310
Packing Dimensions WxHxD (mm) Outdoor Unit 980×680×400

2
2. . S SP PE EC CI IF FI IC CA AT TI IO ON NS S
3
Indoor Unit 16
Gross Weight (Kg) Outdoor Unit 53
Loading Capacity (20'/40'/40'HC ) 70/150/175
Approvals CE, WEEE,RoHS
NOTE :Test conditions：
Cooling : Indoor: DB27℃/ WB19℃ Outdoor: DB35℃/ WB24℃
Heating: Indoor: DB20℃/ WB15℃ Outdoor: DB7℃/ WB 6℃
2-2. Major component specifications
2-2-1.INDOOR FAN MOTOR
WIRING DIAGRAM
ELECTRIC
PERFORMANCE PARAMETER
Motor model DG13G2-02
Rated power source 208V～240V；50Hz～60Hz
Poles 4
Rated load output(W) 25W
Ambient temperature(℃) -5℃～+43℃.

2
2. . S SP PE EC CI IF FI IC CA AT TI IO ON NS S
4
2-2-2 OUTDOOR FAN MOTOR
ELECTRIC
PERFORMANCE PARAMETER
Motor model DG13Z1-13
Rated power source 208~240V 50~60HZ
Poles 4
Rated load output(W) 25W
Ambient temperature( )℃-5℃～+43 .℃
WIRING DIAGRAM
2-2-3. COMPRESSOR
ELECTRIC PERFORMANCE PARAMETER
Compressor model PA215X2CS-4KU1
Compressor type Rotary
Motortype.Starting type PSC
Winding resistance（at 20℃）1.54Ω（main）/2.48Ω（aux）
Motor Running capacitor 50uF/450V
Number of cylinder 1
Oil type ESTER OIL VG74
Oil charge (cc) 750
Input power(W) 1820W/1905W(±5%)
Current (A) 8.55A/8.55A(±5%)
Ambient temperature( )℃-5℃～+43 .℃

2
2. . S SP PE EC CI IF FI IC CA AT TI IO ON NS S
5
WIRING DIAGRAM:
2-3. Other component specifications
2-3-1. LOUVER MOTOR
ELECTRIC
PERFORMANCE PARAMETER
Stepper Motor model DG13B1-01
Voltage(DC) 12V
Number of phase 4
Drive mode 1-2 phase excitation unipolar drive
Resistance per phase 200Ω±7%
Relative humidity(RH) 45%～85%
Temperature range(℃) -10℃～+40℃.
WIRING DIAGRAM:
3 yellow ()
1blue ()
5red ()
M

3
3. . I IN NS ST TA AL LL LA AT TI IO ON N
6
1、How to choose an air conditioner：
a. Choice for reference: 150-170W/㎡ for average rooms;
b. Choice for reference: 160-200W/㎡ for small size offices;
c. Choice for reference: 220-350W/㎡ for restaurants;
d. Choice for reference: 200-300W/㎡ for entertaining venues;
e. Choice for reference: 220-280W/㎡ for the top floor.
Note:1W = 3.412btu.
2. Indoor Unit:
For indoor unit installation, the distance between its top and the ceiling shall
not be less than 10 cm -20 cm, and the distance from the ground should be between
2m to 2.6m. Also the wallboard must be smooth and straight, with its supporting force
of not less than 60 kg.
The location for installing the indoor unit shall be far away from heat source,
the space between it and the door or window should exceed 0.6m
3. Outdoor Unit:
The air conditioner outdoor unit should not occupy public sidewalks, the
distance between the mounting bracket installed along the road (on condition that
the mounting bracket does not affect the public access, it can be installed
horizontally) and the ground must exceed 2.5m. Also we shall remember that: a. the
air flow must run freely. b. we should protect famous ancient buildings during
installation. c. the installation does not affect the traffic.
The distance between air outlet of outdoor unit and the opposite object should
be more than 1 meter, otherwise the machine would stop running because of overload
by heat yield failure.
If the outdoor unit was opposite the resident's door or window, you should
install the machine as far as possible away from the adjacent doors windows and plants,
and the distance shall not be less than the following values: for the rated cooling
capacity not more than 4.5KW, the distance should be 3m.; for the rated cooling
capacity more than 4.5KW, the distance should be 4m.
It should remember to avoid installing at places where the natural environment
is harsh, such as heavy fumes and wind, direct sunlight or high-temperature and heat,
together with the place where children easily reach.
4. The Unit:
When installing the air conditioner, the outdoor unit should be below the indoor
unit so as to facilitate circle of refrigerant and refrigeration oil .
The height difference between wall mounted indoor unit and the outdoor unit
is generally not more than 5 meters.
The connection pipe can't exceed 5 meters, and the longest is 10 meters. ⑵ when
the length exceeds 5 meters, 15g fluoride is required to be added for each exceeding
1m.

4
4. . E EL LE EC CT TR RI IC CA AL L D DA AT TA A
7
4-1.Electrical wiring diagrams
4-1-1.INDOOR
4-1-2. OUTDOOR

4
4. . E EL LE EC CT TR RI IC CA AL L D DA AT TA A
8
4-3. Sensor parameter
1. THE PARAMETER OF THE COILAND INDOOR SENSOR：（R0=15K±2%）
T(℃) R(KΩ) V(v) A/D T(℃) R(KΩ) V(v) A/D
-20 152.5 4.5522388 E8 30 11.99 2.221193 71
-19 143.9 4.528005 E7 31 11.47 2.1666037 6E
-18 135.8 4.5026525 E6 32 10.98 2.113164 6C
-17 128.3 4.4766225 E4 33 10.51 2.0599765 69
-16 121.1 4.4489346 E3 34 10.06 2.0071828 66
-15 114.5 4.4208494 E1 35 9.634 1.9554275 64
-14 108.2 4.3912338 E0 36 9.229 1.9045359 61
-13 102.3 4.3606138 DE 37 8.842 1.8542907 5F
-12 96.73 4.3287389 DD 38 8.474 1.8049757 5C
-11 91.51 4.2958408 DB 39 8.123 1.7564762 5A
-10 86 4.2574257 D9 40 7.789 1.7089385 57
-9 81.97 4.2265649 D8 41 7.47 1.6622163 55
-8 77.62 4.1902397 D6 42 7.165 1.6162869 52
-7 73.52 4.1527338 D4 43 6.875 1.5714286 50
-6 69.05 4.107674 D1 44 6.597 1.5272955 4E
-5 66.01 4.0741884 D0 45 6.333 1.4843201 4C
-4 62.58 4.033256 CE 46 6.08 1.4421252 4A
-3 58.34 3.9773657 CB 47 5.838 1.4008062 47
-2 56.29 3.947959 C9 48 5.608 1.3606366 45
-1 53.41 3.9036691 C7 49 5.387 1.3211851 43
0 50.69 3.8582737 C5 50 5.177 1.2828964 41
1 48.12 3.8117871 C2 51 4.976 1.2454946 40
2 45.7 3.7644152 C0 52 4.783 1.2088662 3E
3 43.41 3.7159733 BE 53 4.599 1.1732741 3C
4 41.25 3.6666667 BB 54 4.423 1.1385986 3A
5 39.2 3.6162362 B8 55 4.255 1.1049078 38
6 37.27 3.5651425 B6 56 4.093 1.0718588 37
7 35.44 3.5130849 B3 57 3.939 1.0399176 35
8 33.71 3.4602751 B0 58 3.792 1.00894 33
9 32.08 3.4069669 AE 59 3.65 0.9785523 32
10 30.63 3.3563445 AB 60 3.515 0.9492304 30
11 29.06 3.2977758 A8 61 3.385 0.9205874 2F
12 27.68 3.2427366 A5 62 3.261 0.8928865 2E
13 26.36 3.1866538 A3 63 3.142 0.8659464 2C
14 25.12 3.1306082 A0 64 3.028 0.8398047 2B
15 23.84 3.069001 9D 65 2.918 0.814265 2A
16 22.82 3.0169223 9A 66 2.813 0.7895919 28
17 21.76 2.9597388 97 67 2.713 0.7658217 27
18 20.75 2.9020979 94 68 2.618 0.7429901 26
19 19.79 2.8442081 91 69 2.524 0.7201552 25
20 18.88 2.7863046 8E 70 2.436 0.6985547 24
21 18.03 2.729337 8B 71 2.36 0.6797235 23