iBaby M2C User manual

iBaby Labs, Inc.

iBaby MonitorUser Manual
2
Content
1
PRODUCT OVERVIEW
..........................................................................................................................3
1.1 PACKING LIST ...........................................................................................................................3
1.2 INTERFACE INTRODUCTION.......................................................................................................3
1.3 PRODUCT SPECIFICATIONS........................................................................................................4
2
INSTALLATION INSTRUCTIONS
........................................................................................................5
2.1 APP DOWNLOAD.............................................................................................................................5
2.2 DEVICE STARTUP...........................................................................................................................5
2.3 ACCOUNT REGISTRATION AND LOGIN .................................................................................................6
2.4 DEVICE ACTIVATION .....................................................................................................................6
3
APP OPERATION AND FUNCTION INTRODUCTION
............................................................................9
3.1 VIDEO CONTROL MAIN INTERFACE ....................................................................................................9
3.2 APPFUNCTION MENU ...................................................................................................................10
3.3 INTRODUCTION TO COMMON FUNCTIONS ............................................................................................11
4
FAQS
................................................................................................................................................15
4.1 DEVICE LED STATUS LIGHT MEANING...................................................................................15
4.2 INSTALLATION ISSUES .............................................................................................................15
4.3 KEEP LOADING.......................................................................................................................19
4.4 USAGE ISSUES.........................................................................................................................21
5
CONTACT INFORMATION
..................................................................................................................22
6
FCC CAUTION
..................................................................................................................................22

iBaby MonitorUser Manual
3
1
Product Overview
1.1 Packing list
iBabymonitor*1
Wall bracket *1
User manual *1
Power adapter *1
1.2 Interface Introduction
1) LED status light: Indicates the current working status of the machine, see Table 1 of
Section 4.1
2) Power interface
3) Reset button: Long press to restore the device to factory settings.
4) Temperature and humidity sensor interface: Used to connect the bottom and
transmit temperature and humidity data.
5) Photosensitive sensor: Used for automatic switching of night vision.
6) Microphone
7) Lens
LED status light
Microphone
Temperature&humidity
sensor interface
Power interface
Reset button
Photosensitive sensor
Lens

iBaby MonitorUser Manual
4
1.3 Product Specifications
Model:M2C
Video
compression
method H.264
Frame rate 1~12 frames
Resolution Ultra (1920*1080),HD(1280*720),VGA(640*480)
Lens
standard：4.0mm F=2.0
Fixed aperture (2 million lens) Angle of view 85°
Online users support 4 users to watch online
Audio
compression
method G711
Sampling
frequency 8Kpbs
Input one audio input / built-in microphone
Output one audio output / built-in speaker
Intercom mode full duplex: two-way voice simultaneous intercom
Night vision
Night vision
control
Photosensitive Resistor Automatic Control IR Light On
(Minimum Illumination 0LUX)
Night vision effect 8 12ML LED lights Night vision 8 meters
Network protocol
Network
protocol TCP/IP, HTTP, UDP, DHCP, UPNP, NTP, P2P, etc.
Support IP
address Dynamic IP address
Wireless
Wireless
Protocol Support WI-FI 802.11 a/b/g/n
WI-FI module supports 2.4GHz Wi-Fi
Encryption
mode Support WPA/WPA2 encryption
Built-in
antenna port 1
Other interfaces
USB interface 1
Temperature
and humidity
module
built-in：1
Reset button 1
Power
connector DC5V 1A
Other exterior plastic

iBaby MonitorUser Manual
5
2
Installation instructions
2.1
APPDownload
Apple users: App Store search for "iBaby Care App"
Android users: Search the "iBaby Care App" on the Google Play Store
The application icon is shown below:
2.2
Device startup
Plug the device into the power supply. After about 30 seconds, the power-on prompt sounds
and the rear LED status light turns red and flashes slowly, indicating that the device startup is
complete and enters the standby state.
Note:
If the device has been activated on the server, no power-on tone will sound when powering up.
For the meaning of LED status lights, see Table 1 in Section 4.1.
material
Otheres
Use
environment indoor use
Product power
consumption
within 2.5W when no one is watching during the day, within
3W after the infrared light is turned on at night
Working
environment temperature: -10~40 °C, humidity: 40 °C ≤75%
Storage
environment temperature: -40 ° C ~ 55 ° C, humidity: 55 ° C ≤90%
Size
body size: 585*55*55mm (length * width * height)
packing size: 222*222*77mm (length * width * height)
Weight gross weight: 380g
System requirements
Mobile
operating
system
iOS8.0 or above,Android4.0 or higher
Certification Certificate FCC CE ROSH RCM KC

iBaby MonitorUser Manual
6
2.3
Account registration and login
1. New users
Press the App prompt to register an account. The account number must be an actual
and valid mailbox, and the password must be a combination of letters (case sensitive)
and numbers, and the length is 6 characters or more. Login will be completed
automatically after registration is completed.
Note: The real mailbox is convenient for recovering the password and obtaining
technical support reply when you forget the password.
2. Users with existing accounts
Log in directly using your registered email account and password. If you have
forgotten your login password, please click the "Forgot Password" link on the login
page and follow the steps to reset the password.
2.4
Device Activation
After the device is booted, confirm that the phone used to activate the device is connected to
Wi-Fi and can access the iBaby Care App with the registered account when it is connected to the
Internet.
1. Click “Add Device” in the menu bar to enter the product selection page below, select the
corresponding device model to activate, and then select “Installation Preparation” page.

iBaby MonitorUser Manual
7
3. After confirming that the prepared content is complete, click the "Next" button.
4. Go to the following page, enter the correct Wi-Fi password, and click the “Next” button to
enter the device activation process.

iBaby MonitorUser Manual
8
5. Activate the progress display, please wait for the activation progress to complete
automatically and jump to the video control main interface (this process lasts about 1
minute), you can start normal use.
Note:
If you have not activated successfully, please refer to the “Installation Questions” section in
section 4.2 of this document.

iBaby MonitorUser Manual
9
3
APP operation and function introduction
3.1
Video control main interface
收听：
1. Functional navigation area：
：Function menu navigation button. Click on the left side to slide out the function menu
page.
：Device list. When multiple devices are installed, click to switch to
watch other devices.
：Media library. Display alarms, manual recording/photographing media files.
2. Information display area：
：Current ambient temperature
：Current environmental humidity
：Device side Wi-Fi signal strength indication
3. Function button area：
Function button
area
Information display area
Functional navigation area

iBaby MonitorUser Manual
10
：Listen button. Receive sound from the device side.
：Speech button.Transfer the sound to the device side.
：Record button. Record the current video, The video file is saved in the media library.
：Music button.Enter the music play page.
：Capture button. Capture the current video, the image is saved in the media library ：
Air quality icon. Display the current air quality level, click to view historical data.
3.2
APP function menu
Switch products: Click to select other types of iBaby products
Home: Return to the viewing screen.
Add device: Add new device
Alarm setting: set alarm level or information such as movement, sound, etc.
Invite & View Users: Invite other users to view or configure viewer user permissions.
Help Center: Frequently Asked Questions