iBaby M3 User manual

i
iB Ba ab by y M Mo on ni it to or r
Model: M3
User Manual
"
"T Th hi is s p pr ro od du uc ct t i is s m me ea an nt t f fo or r p pr ro ov vi id di in ng g c co on nv ve en ni ie en nc ce e f fo or r b ba ab by y
m
mo on ni it to or ri in ng g. . T Th he e m ma an nu uf fa ac ct tu ur re er r i is s n no ot t r re es sp po on ns si ib bl le e f fo or r a an ny y l le eg ga al l
l
li ia ab bi il li it ty y c ca au us se ed d b by y n ne eg gl li ig ge en nc ce e. . " "
iBaby Monitor User Manual
2
Index
1INTRODUCTION................................................................................................................ 4
1.1 THE PACKAGE CONTENTS.............................................................................................. 4
1.2 FUNCTION AND FEATURES............................................................................................. 4
1.3 PRODUCT SPECIFICATION.............................................................................................. 5
2APPEARANCE AND INTERFACE.................................................................................... 6
2.1 APPEARANCE ............................................................................................................... 6
2.2 INTERFACE OF THE CAMERA .......................................................................................... 7
3VISIT CAMERA FROM LOCAL AREA NETWORK.......................................................... 7
3.1 LOCAL AREA NETWORK CONNECTION ............................................................................ 7
3.2 VISIT CAMERA WITH A IPOD TOUCH,IPHONE AND IPAD..................................................... 8
3.3 SEARCH AND SET THE IPADDRESS OF THE CAMERA........................................................ 8
3.4 VISIT CAMERA FROM A PC .......................................................................................... 10
4VISIT CAMERA OVER INTERNET................................................................................. 13
4.1 INTERNET CONNECTION............................................................................................... 13
4.2 PORT FORWARDING .................................................................................................... 13
4.3 DDNS ....................................................................................................................... 14
4.3.1 Manufacturer’s DDNS........................................................................................... 14
4.3.2 Third Party DDNS................................................................................................. 15
5OTHER SETTINGS.......................................................................................................... 15
5.1 NETWORK SETTING..................................................................................................... 15
5.1.1 Basic Network Setting........................................................................................... 15
5.1.2 WIFI Setting.......................................................................................................... 15
5.1.3 ADSL Setting ........................................................................................................ 16
5.1.4 UPnP Setting ........................................................................................................ 16
5.1.5 DDNS Setting ....................................................................................................... 17
5.1.6 MSN Setting.......................................................................................................... 17
5.2 ALARM SETTINGS ....................................................................................................... 17
5.2.1 Alarm Setting ........................................................................................................ 17
5.2.2 Mail Service Setting.............................................................................................. 19
5.2.3 FTP Service Setting.............................................................................................. 20
5.2.4 Alarm Server......................................................................................................... 21
5.3 ADVANCED ................................................................................................................. 21
5.3.1 User Setting.......................................................................................................... 21
5.3.2 Multi Device Setting.............................................................................................. 22
5.3.3 Other settings ....................................................................................................... 22
5.4 MAINTAIN.................................................................................................................... 23

iBaby Monitor User Manual
3
5.4.1 Device Information................................................................................................ 23
5.4.2 Time Setting.......................................................................................................... 23
5.4.3 Firmware upgrade................................................................................................. 24
5.4.4 Restore Factory Default........................................................................................ 24
5.4.5 User browsing Log................................................................................................ 24
6CENTRALIZATION CONTROL....................................................................................... 24
7FAQ.................................................................................................................................. 25
iBaby Monitor User Manual
4
1 Introduction
The iBaby monitor combines a high quality digital video camera with network
connectivity and a powerful web server to bring clear video to your iPod Touch, iPhone
and iPad, or a PC from anywhere on your local network or over the Internet.
1.1 The package contents
Camera * 1
User Manual & Utility CD *1
Power Adapter *1
Bracket * 1
Cable * 1
Antenna * 1
Quick Installation Guide *1
Screw *1 set
1.2 Function and Features
Support 802.11b/g protocol, can build up wireless monitoring.
It adopts the TCP/IP network protocols and has inner web server. Users can browse
video with a iPod Touch, iPhone and iPad, also can browse video through IE and
other browsers.
With built-in Microphone, it enables user to monitor the sound on the site. User can
also connect this camera to a speaker, and it supports two-way intercom function.
It was equipped with pan/tilt function, horizontally 350°and vertically 70°. Its outlook is
smart, easy and convenient to install in many sites.
Infrared LED for night vision covers 5m area, to realize 24 hours monitoring.
Motion detection, sound detection and alarm pin can be connected to external
sensors to detect environmental situation.
Alarming record can be stored by email, FTP server. External alarm can be open
when detecting something unusual.
Supports UPNP, port forwarding automatically on the router.
Manufacture attaches a label at the bottom of each Camera, providing free DDNS.
When Camera is connected to the internet, this DDNS can be used to visit the
camera.
Manufacture provides free PC software, support Multi-view, Long time recording,
video replay etc.

iBaby Monitor User Manual
5
1.3 Product Specification
Item
Sub Item
Description
Image Capture
Sensor
CMOS sensor
Total of pixel
300k
Minimum illumination
0 Lux(IR on automatically)
Lens
f=3.6mm, F=2.0, Fixed Iris
Pan/Tilt
Pan Coverage
350°
Tilt Coverage
70°
Assistant
Lighting
10pcs 850nm Infrared LEDs, 5m
distance
Lighting Control
Auto control
Video and Audio
Resolution
640*480(VGA)/320*240(QVGA)/1
60*120(QQVGA)
Compression
MJPEG
Frame rate
30fps
Bit rate
128kbps ~ 5Mbps
Image Rotation
Mirror /Flip
Audio Compression
ADPCM
Network
Basic Protocol
TCP/IP、UDP/IP、HTTP、SMTP、
FTP、DHCP、DDNS、UPNP、NTP、
PPPOE
Other Protocol
802.11b/g
Other Features
Video control
Support
Dual way audio
Support
Motion Detection
Support
Sound Detection
Support
Triggered Actions
Email/FTP/external alarm/send
message to alarm server
User Access Authority
Three levels
Date/ Time Setting
Support
Upgrade
Upgrade from network
DDNS
A free DDNS provided by
manufacturer
Hardware Interface
Ethernet
10Base-T/100base-TX
Alarm In
1 channel
Alarm Out
1 channel
Audio In
Internal Mic and External Mic
socket x 1
Audio Out
Audio Line-out socket x 1
Physical Index
Weight
358g
Main body
111mm(L)*110mm(W)*126mm(H)
iBaby Monitor User Manual
6
Power
DC 5V
Power consumption
<6W
Operating temperature
0℃~ 40℃
Operating humidity
10% ~ 80% non-condensing
Software(iPod
Touch , iPhone and
iPad)
iOS 4.0 or later
App is free to download from App
Store
Software(PC)
OS Supported
Microsoft Windows
98/2000/XP/Vista/Win 7 etc.
Mac OS
Browser
Internet Explorer6.0 or higher, or
Compatible Browser, Firefox,
Safari etc.
Application Software
IPCMonitor.exe
2 Appearance and interface
2.1 Appearance
Figure 1
Note：Status Indicator: the blue light is to show that the device is running. Slow flicking
(once every 2 second）indicates the device is searching for network. Normal flicking (once
per second) indicates the wired network connected. Quick flicking（2~3 times per second)
indicates wireless network connected. The default state of status indicator is off. You can
turn it on with your iPod Touch, iPhone and iPad, or PC software.

iBaby Monitor User Manual
7
2.2 Interface of the camera
Figure 2
1）Power Input Socket: Connect Power adaptor, the adaptor‘s output is 5V 1.5A.
2）RESET Button: Press the RESETbutton and hold on more than 10 seconds, the
camera will restart and recover to the factory default settings.
3）WIFI Antenna Connector: Install the WIFI antenna.
4）RJ45 Ethernet Socket: RJ45 Ethernet socket is 10/100M self-adjust.
5）Audio Input Socket: Audio input socket is designed for connecting external
microphone. The built-in microphone will be invalidation when the external
microphone plug in.
6）Audio Output Socket: Audio output socket is for line-out audio player, such as
headphone, speaker, etc.
7）Alarm Output Socket
8）Alarming Input Pin
3 Visit Camera from Local Area Network
3.1 Local Area Network connection
Figure 3
iBaby Monitor User Manual
8
Figure 4
3.2 Visit camera with a iPod Touch, iPhone and iPad
Prior to using you must first install the iBaby MonitorApp from the App Store. THIS IS A
FREE DOWNLOAD. Please confirm the iOS is V4.0 or later. If not, update your iOS
before using this product.
If you have not install that, please launch the App Store, and search using the keyword
“iBaby Monitor”, be sure your web function is enabled.
After downloading, a icon should be appeared like this: .
Launch the iBaby MonitorApp, it will automatically search the camera in your
local area network, and follow the instruction on the App, you can set up the
camera easily.
3.3 Search and set the IP address of the camera
Run “BSearch_en.exe” in the CD, the setting interface as figure 5.

iBaby Monitor User Manual
9
Figure 5
Operation Steps:
1) Click “Search (F3).
2) Choose the device.
3) Change the ip address of the camera according to the information in the red frame
on the left. The numbers in the red circle should not be the same.
4) Put the user name and password into “Authentication” (By default, the user name
is: admin, password is: 123456).
5) Click “Update”.
6) After successfully update, click “Search (F3)”, choose the device and click “Browse
(F4)”. Then you may view the camera, like figure 6.
NOTE:
1) If you don’t know how to fill out the content of “IP config”, you could also tick the “Set
IP automatically” to get the IP address from the router automatically.
2) If you have the firewall software in your PC, when you run the BSearch_en.exe, it
may pop up a window to say “whether you want to block this program or not”, then
you should choose not to block.
iBaby Monitor User Manual
10
Figure 6
3.4 Visit Camera from a PC
We suggest using IE kernel browser to view the video (it can provide more functions), but
user need to install Player before viewing the video. Click “download and install player
(first use)” link, it will popup dialogue box as Figure 7, click Run, it will automatically
download player and install.
Figure 7
After install the plug-ins, click “Mode 1 to view” link in Figure 6 to view the video (video as
Figure 8).

iBaby Monitor User Manual
11
Figure 8
1) Main Menu
The main menu includes the function setting of different submenu
2) Status Displaying Area
In right up corner, it is the status displaying area, to show the 9 devices’status:
if not connected, button is gray
if connected, button is green
If wrong connected , button is yellow
If alarm , button is red
3) Multi Channel displaying area
If users add multi channel（refer to 5.3.2）, when shift to 4-Ch, 9-CH, and it will
automatically show other devices. You select one device, and you can operate it by
these keys: play, stop, and record, control Pan/tilt, etc.
These buttons mean start video, stop, monitor, talk, record and snapshot.
P.S: If you want to click this button to record the video, please go to
advanced—Other Settings to set the Record Path first. Please see below figure9.
iBaby Monitor User Manual
12
Figure 9
4) PT and video control
In Pan/Tilt control area, user can control the position according to the arrow sign: up,
down, left, right, middle, horizontal cruise, vertical cruise, and stop etc.
Means open IO output and Close IO output.
User can also set the device frame rate、resolution, brightness, contrast and other
parameters.

iBaby Monitor User Manual
13
4 Visit Camera over Internet
4.1 Internet connection
Figure 10
4.2 Port forwarding
Now most router have UPNP, and the UPNP default status is on, so you need not to do
the port forwarding. Otherwise, you must do port following on the router If visit Camera
over internet. Take Netgear router for example.
iBaby Monitor User Manual
14
Figure 11
Operation Steps:
1) After login the interface of the router，choose “Port Forwarding”
2) Choose “Add custom Service”
3) Input camera port.
4) Input camera IP address，click “Apply”。（ the http port and ip address should be the
same as figure 5 which set by you own)
Note: Different router has different settings for port-forwarding; please kindly follow your
router guide to do the port-forwarding.
After the port-forwarding is done, you could view the IP Camera from WAN now.
4.3 DDNS
You could also use the manufacturer DDNS to view the device as long as your
port-forwarding succeeds.
4.3.1 Manufacturer’s DDNS
Device manufacturer has provided a free DDNS. User can find it in network menu, like
figure 12.

iBaby Monitor User Manual
15
Figure 12
4.3.2 Third Party DDNS
User can also use third part DDNS, such as www.3322.org. User must apply a free
domain name from this website and fill the info into the below blanks (Figure 13) and
save the settings. Then the domain name can be used.
Figure 13
Note: Using the third party domain name, if the http port is not 80, the port number should
be adding to the domain name with colon. Example: http://btest.3322.org:81.
While manufacturer DDNS is no need to add PORT.
5 Other Settings
5.1 Network Setting
5.1.1 Basic Network Setting
The user can also enter the Basic Network Settings to set the IP address except using
the search software. See below Figure 14.
Figure 14
5.1.2 WIFI Setting
If the device is with WIFI, enter theWireless LAN Setting, just as below Figure 15 shown,
click the “Scan” button, it will show you all the wireless networks detected in the Wireless
Network List column. Select one of them and tick “Using Wireless Lan”, then the relevant
data of the selected wireless network will be shown in the following blanks. Put in the
password and click “Set”, then the WIFI setting is finished.
iBaby Monitor User Manual
16
Figure 15
Note1: When the device is connected both WIFI and wired, it will firstly connect to the
wired network, if it can’t connect to it, then it will change to connect to the wifi. The
IP address and port is the same, either wireless or wired network.
Note2: Before you do the configuration of wireless as shown above; please make sure
the device is connected to the network via network cable. After settings succeed,
please reboot the device and wireless function takes effect.
5.1.3 ADSL Setting
User could enable theADSL Dialup according to the below Figure 16 (The ADSL
provider will assign the user name and password to you when you apply forADSL
service.) Connect the device directly to the ADSL modem and it is connected to the
Internet.
Figure 16
5.1.4 UPnP Setting
If you enable UPNP, once the IP camera is connected into the LAN, it will communicate
with the router in the LAN to do the port-forwarding automatically.
Below Figure 17, tick “Using UPNP to Map Port” and the setting are completed. You
could check the UPNP succeeds or not in the interface of System Maintenance.
Figure 17
Before using UPNP function, please make sure the router’s UPNP function has been
triggered. Not all the routers support UPNP perfectly. Please test if the router works well

iBaby Monitor User Manual
17
with the equipment, if not, we would suggest you to disable this function and do the
port-forwarding manually.
5.1.5 DDNS Setting
Please refer to the content in 4.3.
5.1.6 MSN Setting
Figure 18
User needs to apply for a MSN account for this device first, for example:
[email protected]m. Please put this MSN account and its password as above Figure 18.
Then put your MSN account, for example: [e-mail], into the ‘MSN Friends
List. Then on your [email protected] MSN list, you can see [email protected] is
online. You just send “url?” to [email protected]m and you will get the WAN ip address of
this ip camera. But please make sure [email protected] and [email protected]
should be MSN friends before you do the settings.
5.2 Alarm Settings
5.2.1 Alarm Setting
1）Alarm Detect
User can select the motion detection. If there is any motion, it will detect the motion and
trigger the alarm. In the motion detect sensibility, the more the figure, and the more
sensitive.
As showed in Figure 19, if any external alarm detector is connected, user will be able to
tick “Alarm Input Armed”. If the external alarm detector is an always on switch alarm,
please choose “open”. If the external alarm detector is always off switch alarm, please
choose “close”.
iBaby Monitor User Manual
18
The user can select voice detection, triggering the alarm. The more the figure, and the
more sensitive.
Figure 19
2）Alarm Action
All kinds of alarm modes:
IO interface for alarm signal output: when relay is switched on, the external
alarm will begin to alarm.
Send alarm info by email.
Send the site pictures to the FTP server, user can also set the break time
between two pictures.
Send alarm info to the alarm server.
3）Scheduler
Device will trigger alarm in scheduled time. User can set schedule time to be “all the
time”. Before you set “Schedule”, please go to Date and Time settings to set the correct
time for the item, as shown in figure 20.

iBaby Monitor User Manual
19
Figure 20
5.2.2 Mail Service Setting
The device will send alarm email to you. You only need to fill out the blanks with your
email address as shown in Figure 21. After the setting, please click save and test to
check if it works properly. If it is properly set, user can tick to enable “Report Internet IP
by mail”. After every restart, the device will send its Internet IP address to user’s email
address.
iBaby Monitor User Manual
20
Figure 21
5.2.3 FTP Service Setting
Figure 22
When alarming, device will snap and send the image to FTP server, please make sure
the FTP setting is correct. Above Figure 22 of FTP setting for your reference, after the
setting is finished, click “Test” to test your settings are correct or not.
After correct setting FTP server, you can use “upload Image Periodically” function. Even
no alarm, device can also send the snap image to FTP periodically.
In order to use FTP function, user should apply username and password on the FTP