IBM Storwize V5000 User manual

IBM Storwize V5000
Quick Installation Guide
GI13-2861-05
IBM

Note
Before using this information and the product it supports, read the following information:
vThe general information in “Notices” on page 45
vThe information in the “Safety and environmental notices” on page ix
vThe information in the IBM Environmental Notices and User Guide (provided on a DVD)
This edition replaces GI13-2861-04.
© Copyright IBM Corporation 2013, 2015.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.

Contents
Figures ............... v
Tables ............... vii
Safety and environmental notices ... ix
Safety notices and labels .......... ix
Caution notices for the Storwize V5000 .... x
Danger notices for Storwize V5000 ..... xiv
Special caution and safety notices....... xvi
General safety ............ xvi
Handling static-sensitive devices ...... xvii
Environmental notices .......... xviii
About this guide .......... xix
Who should use this guide ......... xix
Storwize V5000 library and related publications .. xix
IBM Publications Center .......... xx
Related websites............. xx
Sending your comments .......... xxi
How to get information, help, and technical
assistance ............... xxi
Chapter 1. Before you begin the
installation ............. 1
Reviewing your packing slip ......... 5
Identify the hardware components ....... 6
Verify environmental requirements ...... 11
Review enclosure location guidelines ...... 11
Chapter 2. Installing the hardware ... 13
Installing the support rails ......... 13
Installing the enclosures .......... 17
Connecting SAS cables to expansion enclosures .. 18
SAS cabling guidelines ......... 19
Connecting Ethernet cables to node canisters ... 22
Connecting Fibre Channel cables to a 10 Gbps
iSCSI-FCoE 2-port host interface adapter .... 22
Connecting Fibre Channel cables to a Fibre Channel
host interface adapter ........... 24
Connecting a control enclosure to a host .... 25
Powering on the system .......... 27
Chapter 3. Configuring the system... 29
Checking your web browser settings for the
management GUI ............ 29
User name and password for system initialization 32
Initializing the system with a Microsoft Windows
computer ............... 33
Initializing the system with an Apple Macintosh
computer ............... 35
Initializing the system with a Linux computer ... 37
Adding an expansion enclosure to an existing
system ................ 38
Adding a control enclosure to an existing system.. 38
Appendix A. Accessibility features for
Storwize V5000 ........... 41
Appendix B. Where to find the
Statement of Limited Warranty .... 43
Notices .............. 45
Trademarks .............. 47
Homologation statement .......... 47
Electronic emission notices ......... 47
Federal Communications Commission (FCC)
statement .............. 47
Industry Canada compliance statement .... 48
Australia and New Zealand Class A Statement 48
European Union Electromagnetic Compatibility
Directive .............. 48
Germany Electromagnetic Compatibility Directive 48
People's Republic of China Class A Statement .. 49
Taiwan Class A compliance statement .... 50
Taiwan Contact Information ........ 50
Japan Voluntary Control Council for Interference
Class A statement ........... 50
Japan Electronics and Information Technology
Industries Association Statement ...... 50
Korean Electromagnetic Interference (EMI)
Statement .............. 51
Russia Electromagnetic Interference Class A
Statement .............. 51
European Contact Information ........ 51
Taiwan Contact Information ......... 51
Index ............... 53
© Copyright IBM Corp. 2013, 2015 iii

iv Storwize V5000: Quick Installation Guide

Figures
1. Rear view of a Storwize V5000 control enclosure 6
2. Data ports in the rear of the Storwize V5000
control enclosure ........... 7
3. Control enclosure support rails of a Storwize
V5000 system ............ 8
4. Rear view of a Storwize V5000 expansion
enclosure.............. 8
5. SAS ports and LEDs in rear view of a Storwize
V5000 expansion canister ........ 9
6. Expansion enclosure support rails on Storwize
V5000 ............... 9
7. USB flash drive ........... 10
8. Rack mounting rails and screws...... 13
9. Installing the rail spring ........ 14
10. Hole locations in the front of the rack.... 14
11. Opening the hinge brackets ....... 15
12. Closing hinge brackets and installing rear
screw .............. 16
13. Inserting the enclosure ......... 17
14. Connecting the SAS cables ....... 19
15. SAS cable connectors ......... 20
16. Connecting the SAS cables ....... 21
17. Connecting the Ethernet cables ...... 22
18. Example configuration with two pairs of cables
connected to 10 Gbps iSCSI-FCoE 2-port host
interface adapters .......... 23
19. Example configuration with two Fibre Channel
cables per canister .......... 24
20. Example configuration with four Fibre
Channel cables per canister ....... 24
21. Mini SAS HD to Mini SAS HD cable .... 25
22. Mini SAS HD to Mini SAS cable ..... 25
23. Example configuration with two SAS cables
per canister ............ 26
24. Expansion canister LEDs ........ 27
25. Node canister LEDs.......... 28
© Copyright IBM Corp. 2013, 2015 v

vi Storwize V5000: Quick Installation Guide

Tables
1. IBM websites for help, services, and
information ............ xix
2. Storwize V5000 library ......... xx
3. IBM documentation and related websites xx
4. IBM websites for help, services, and
information ............ xxi
5. Steps for different installation scenarios ... 2
6. Storwize V5000 enclosures ........ 5
7. Selecting bracket pins for your rack .... 15
8. Default user name and password for the
initialization GUI .......... 32
© Copyright IBM Corp. 2013, 2015 vii

viii Storwize V5000: Quick Installation Guide

Safety and environmental notices
Review the safety notices, environmental notices, and electronic emission notices
for IBM®Storwize®V5000 before you install and use the product.
Suitability for telecommunication environment: This product is not intended to
connect directly or indirectly by any means whatsoever to interfaces of public
telecommunications networks.
To find the translated text for a caution or danger notice, complete the following
steps.
1. Look for the identification number at the end of each caution notice or each
danger notice. In the following examples, the numbers (C001) and (D002) are
the identification numbers.
CAUTION:
A caution notice indicates the presence of a hazard that has the potential of
causing moderate or minor personal injury. (C001)
DANGER
A danger notice indicates the presence of a hazard that has the potential
of causing death or serious personal injury. (D002)
2. Locate the IBM Systems Safety Notices with the user publications that were
provided with the Storwize V5000 hardware.
3. Find the matching identification number in the IBM Systems Safety Notices.
Then, review the topics about the safety notices to ensure that you are in
compliance.
4. (Optional) Read the multilingual safety instructions on the Storwize V5000
website.
a. Go to www.ibm.com/support
b. Search for “Storwize V5000”
c. Click the documentation link
Safety notices and labels
Review the safety notices and safety information labels before using this product.
To view a PDF file, you need Adobe Acrobat Reader. You can download it at no
charge from the Adobe website:
www.adobe.com/support/downloads/main.html
IBM Systems Safety Notices
This publication contains the safety notices for the IBM Systems products in
English and other languages. Anyone who plans, installs, operates, or services the
system must be familiar with and understand the safety notices. Read the related
safety notices before you begin work.
Note: The IBM System Safety Notices document is organized into two sections. The
danger and caution notices without labels are organized alphabetically by language
© Copyright IBM Corp. 2013, 2015 ix

in the “Danger and caution notices by language” section. The danger and caution
notices that are accompanied with a label are organized by label reference number
in the “Labels” section.
Note: You can find and download the current IBM System Safety Notices by
searching for Publication number G229-9054 in the IBM Publications Center.
The following notices and statements are used in IBM documents. They are listed
in order of decreasing severity of potential hazards.
Danger notice definition
A special note that emphasizes a situation that is potentially lethal or
extremely hazardous to people.
Caution notice definition
A special note that emphasizes a situation that is potentially hazardous to
people because of some existing condition, or to a potentially dangerous
situation that might develop because of some unsafe practice.
Note: In addition to these notices, labels might be attached to the product to warn
of potential hazards.
Finding translated notices
Each safety notice contains an identification number. You can use this identification
number to check the safety notice in each language.
To find the translated text for a caution or danger notice:
1. In the product documentation, look for the identification number at the end of
each caution notice or each danger notice. In the following examples, the
numbers (D002) and (C001) are the identification numbers.
DANGER
A danger notice indicates the presence of a hazard that has the potential
of causing death or serious personal injury. (D002)
CAUTION:
A caution notice indicates the presence of a hazard that has the potential of
causing moderate or minor personal injury. (C001)
2. After you download the IBM System Safety Notices document, open it.
3. Under the language, find the matching identification number. Review the topics
about the safety notices to ensure that you are in compliance.
Note: This product was designed, tested, and manufactured to comply with IEC
60950-1, and where required, to relevant national standards that are based on IEC
60950-1.
Caution notices for the Storwize V5000
Ensure that you understand the caution notices for Storwize V5000.
Use the reference numbers in parentheses at the end of each notice (for example,
D005) to find the matching translated notice in IBM Systems Safety Notices.
xStorwize V5000: Quick Installation Guide

CAUTION:
The battery contains lithium. To avoid possible explosion, do not burn or charge
the battery.
Do not: Throw or immerse into water, heat to more than 100°C (212°F), repair or
disassemble. (C003)
CAUTION:
The weight of this part or unit is more than 55 kg (121.2 lb). It takes specially
trained persons, a lifting device, or both to safely lift this part or unit. (C011)
CAUTION:
To avoid personal injury, before lifting this unit, remove all appropriate
subassemblies per instructions to reduce the system weight. (C012)
33.6-46.3 kg (74-102 lbs) 46.3-61.7 kg (102-136 lbs) 61.7-100 kg (136-220 lbs)
>
_
svc01053
Safety and environmental notices xi

CAUTION:
CAUTION regarding IBM provided VENDOR LIFT TOOL:
vOperation of LIFT TOOL by authorized personnel only
vLIFT TOOL intended for use to assist, lift, install, remove units (load) up into rack
elevations. It is not to be used loaded transporting over major ramps nor as a
replacement for such designated tools like pallet jacks, walkies, fork trucks and such
related relocation practices. When this is not practicable, specially trained persons or
services must be used (for instance, riggers or movers). Read and completely
understand the contents of LIFT TOOL operator's manual before using.
vRead and completely understand the contents of LIFT TOOL operator's manual before
using. Failure to read, understand, obey safety rules, and follow instructions may
result in property damage and/or personal injury. If there are questions, contact the
vendor's service and support. Local paper manual must remain with machine in
provided storage sleeve area. Latest revision manual available on vendor's website.
vTest verify stabilizer brake function before each use. Do not over-force moving or
rolling the LIFT TOOL with stabilizer brake engaged.
vDo not raise, lower or slide platform load shelf unless stabilizer (brake pedal jack) is
fully engaged. Keep stabilizer brake engaged when not in use or motion.
vDo not move LIFT TOOL while platform is raised, except for minor positioning.
vDo not exceed rated load capacity. See LOAD CAPACITY CHART regarding
maximum loads at center versus edge of extended platform.
vOnly raise load if properly centered on platform. Do not place more than 200 lb (91
kg) on edge of sliding platform shelf also considering the load's center of
mass/gravity (CoG).
vDo not corner load the platform tilt riser accessory option. Secure platform riser tilt
option to main shelf in all four (4x) locations with provided hardware only, prior to
use. Load objects are designed to slide on/off smooth platforms without appreciable
force, so take care not to push or lean. Keep riser tilt option flat at all times except for
final minor adjustment when needed.
vDo not stand under overhanging load.
vDo not use on uneven surface, incline or decline (major ramps).
vDo not stack loads. (C048, part 1 of 2)
xii Storwize V5000: Quick Installation Guide

vDo not operate while under the influence of drugs or alcohol.
vDo not support ladder against LIFT TOOL.
vTipping hazard. Do not push or lean against load with raised platform.
vDo not use as a personnel lifting platform or step. No riders.
vDo not stand on any part of lift. Not a step.
vDo not climb on mast.
vDo not operate a damaged or malfunctioning LIFT TOOL machine.
vCrush and pinch point hazard below platform. Only lower load in areas clear of
personnel and obstructions. Keep hands and feet clear during operation.
vNo Forks. Never lift or move bare LIFT TOOL MACHINE with pallet truck, jack or
fork lift.
vMast extends higher than platform. Be aware of ceiling height, cable trays, sprinklers,
lights, and other overhead objects.
vDo not leave LIFT TOOL machine unattended with an elevated load.
vWatch and keep hands, fingers, and clothing clear when equipment is in motion.
vTurn Winch with hand power only. If winch handle cannot be cranked easily with one
hand, it is probably over-loaded. Do not continue to turn winch past top or bottom of
platform travel. Excessive unwinding will detach handle and damage cable. Always
hold handle when lowering, unwinding. Always assure self that winch is holding
load before releasing winch handle.
vA winch accident could cause serious injury. Not for moving humans. Make certain
clicking sound is heard as the equipment is being raised. Be sure winch is locked in
position before releasing handle. Read instruction page before operating this winch.
Never allow winch to unwind freely. Freewheeling will cause uneven cable wrapping
around winch drum, damage cable, and may cause serious injury. (C048, part 2 of 2)
Safety and environmental notices xiii

CAUTION:
Removing components from the upper positions in the rack cabinet improves
rack stability during a relocation. Follow these general guidelines whenever you
relocate a populated rack cabinet within a room or building.
vReduce the weight of the rack cabinet by removing equipment starting at the
top of the rack cabinet. When possible, restore the rack cabinet to the
configuration of the rack cabinet as you received it. If this configuration is not
known, you must observe the following precautions.
– Remove all devices in the 32U position and above.
– Ensure that the heaviest devices are installed in the bottom of the rack
cabinet.
– Ensure that there are no empty U-levels between devices installed in the
rack cabinet below the 32U level.
vIf the rack cabinet you are relocating is part of a suite of rack cabinets, detach
the rack cabinet from the suite.
vIf the rack cabinet you are relocating was supplied with removable outriggers
they must be reinstalled before the cabinet is relocated.
vInspect the route that you plan to take to eliminate potential hazards.
vVerify that the route that you choose can support the weight of the loaded
rack cabinet. Refer to the documentation that comes with your rack cabinet for
the weight of a loaded rack cabinet.
vVerify that all door openings are at least 760 x 230 mm (30 x 80 in.).
vEnsure that all devices, shelves, drawers, doors, and cables are secure.
vEnsure that the four leveling pads are raised to their highest position.
vEnsure that there is no stabilizer bracket installed on the rack cabinet during
movement.
vDo not use a ramp inclined at more than 10 degrees.
vWhen the rack cabinet is in the new location, complete the following steps:
– Lower the four leveling pads.
– Install stabilizer brackets on the rack cabinet.
– If you removed any devices from the rack cabinet, repopulate the rack
cabinet from the lowest position to the highest position.
vIf a long-distance relocation is required, restore the rack cabinet to the
configuration of the rack cabinet as you received it. Pack the rack cabinet in
the original packaging material, or equivalent. Also lower the leveling pads to
raise the casters off the pallet and bolt the rack cabinet to the pallet. (R002)
Danger notices for Storwize V5000
Ensure that you are familiar with the danger notices for Storwize V5000.
Use the reference numbers in parentheses at the end of each notice (for example,
D005) to find the matching translated notice in IBM Systems Safety Notices.
xiv Storwize V5000: Quick Installation Guide

DANGER
When working on or around the system, observe the following precautions:
Electrical voltage and current from power, telephone, and communication
cables are hazardous. To avoid a shock hazard:
vIf IBM supplied a power cord(s), connect power to this unit only with the
IBM provided power cord. Do not use the IBM provided power cord for
any other product.
vDo not open or service any power supply assembly.
vDo not connect or disconnect any cables or perform installation,
maintenance, or reconfiguration of this product during an electrical storm.
vThe product might be equipped with multiple power cords. To remove all
hazardous voltages, disconnect all power cords.
vConnect all power cords to a properly wired and grounded electrical outlet.
Ensure that the outlet supplies proper voltage and phase rotation according
to the system rating plate.
vConnect any equipment that will be attached to this product to properly
wired outlets.
vWhen possible, use one hand only to connect or disconnect signal cables.
vNever turn on any equipment when there is evidence of fire, water, or
structural damage.
vDisconnect the attached power cords, telecommunications systems,
networks, and modems before you open the device covers, unless
instructed otherwise in the installation and configuration procedures.
vConnect and disconnect cables as described in the following procedures
when installing, moving, or opening covers on this product or attached
devices.
To disconnect:
1. Turn off everything (unless instructed otherwise).
2. Remove the power cords from the outlets.
3. Remove the signal cables from the connectors.
4. Remove all cables from the devices.
To connect:
1. Turn off everything (unless instructed otherwise).
2. Attach all cables to the devices.
3. Attach the signal cables to the connectors.
4. Attach the power cords to the outlets.
5. Turn on the devices.
vSharp edges, corners and joints might be present in and around the system.
Use care when handling equipment to avoid cuts, scrapes and pinching.
(D005)
DANGER
Heavy equipment–personal injury or equipment damage might result if
mishandled. (D006)
DANGER
Safety and environmental notices xv

DANGER: Serious injury or death can occur if loaded lift tool falls over or if
a heavy load falls off the lift tool. Always completely lower the lift tool load
plate and properly secure the load on the lift tool before moving or using the
lift tool to lift or move an object. (D010)
DANGER
Racks with a total weight of > 227 kg (500 lb.), Use Only Professional Movers!
(R003)
DANGER
Do not transport the rack via fork truck unless it is properly packaged,
secured on top of the supplied pallet. (R004)
DANGER:
Main Protective Earth (Ground):
This symbol is marked on the frame of the rack.
The PROTECTIVE EARTHING CONDUCTORS should be terminated at that point. A
recognized or certified closed loop connector (ring terminal) should be used and secured
to the frame with a lock washer using a bolt or stud. The connector should be properly
sized to be suitable for the bolt or stud, the locking washer, the rating for the
conducting wire used, and the considered rating of the breaker. The intent is to ensure
the frame is electrically bonded to the PROTECTIVE EARTHING CONDUCTORS. The
hole that the bolt or stud goes into where the terminal conductor and the lock washer
contact should be free of any non-conductive material to allow for metal to metal
contact. All PROTECTIVE EARTHING CONDUCTORS should terminate at this main
protective earthing terminal or at points marked with . (R010)
Special caution and safety notices
This information describes special safety notices that apply to the Storwize V5000.
These notices are in addition to the standard safety notices supplied and address
specific issues relevant to the equipment provided.
General safety
When you service the Storwize V5000, follow general safety guidelines.
Use the following general rules to ensure safety to yourself and others.
vObserve good housekeeping in the area where the devices are kept during and
after maintenance.
vFollow the guidelines when lifting any heavy object:
1. Ensure that you can stand safely without slipping.
2. Distribute the weight of the object equally between your feet.
3. Use a slow lifting force. Never move suddenly or twist when you attempt to
lift.
4. Lift by standing or by pushing up with your leg muscles; this action removes
the strain from the muscles in your back. Do not attempt to lift any objects that
weigh more than 18 kg (40 lb) or objects that you think are too heavy for you.
xvi Storwize V5000: Quick Installation Guide

vDo not perform any action that causes a hazard or makes the equipment unsafe.
vBefore you start the device, ensure that other personnel are not in a hazardous
position.
vPlace removed covers and other parts in a safe place, away from all personnel,
while you are servicing the unit.
vKeep your tool case away from walk areas so that other people cannot trip over
it.
vDo not wear loose clothing that can be trapped in the moving parts of a device.
Ensure that your sleeves are fastened or rolled up above your elbows. If your
hair is long, fasten it.
vInsert the ends of your necktie or scarf inside clothing or fasten it with a
nonconducting clip, approximately 8 cm (3 in.) from the end.
vDo not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your
clothing.
Remember: Metal objects are good electrical conductors.
vWear safety glasses when you are hammering, drilling, soldering, cutting wire,
attaching springs, using solvents, or working in any other conditions that might
be hazardous to your eyes.
vAfter service, reinstall all safety shields, guards, labels, and ground wires.
Replace any safety device that is worn or defective.
vReinstall all covers correctly after you have finished servicing the unit.
Handling static-sensitive devices
Ensure that you understand how to handle devices that are sensitive to static
electricity.
Attention: Static electricity can damage electronic devices and your system. To
avoid damage, keep static-sensitive devices in their static-protective bags until you
are ready to install them.
To reduce the possibility of electrostatic discharge, observe the following
precautions:
vLimit your movement. Movement can cause static electricity to build up around
you.
vHandle the device carefully, holding it by its edges or frame.
vDo not touch solder joints, pins, or exposed printed circuitry.
vDo not leave the device where others can handle and possibly damage the
device.
vWhile the device is still in its antistatic bag, touch it to an unpainted metal part
of the system unit for at least two seconds. (This action removes static electricity
from the package and from your body.)
vRemove the device from its package and install it directly into your Storwize
V5000, without putting it down. If it is necessary to put the device down, place
it onto its static-protective bag. (If your device is an adapter, place it
component-side up.) Do not place the device onto the cover of the Storwize
V5000 or onto a metal table.
vTake additional care when you handle devices during cold weather. Indoor
humidity tends to decrease in cold weather, causing an increase in static
electricity.
Safety and environmental notices xvii

Environmental notices
The IBM Systems Environmental Notices contains all of the required environmental
notices for IBM Systems products in English and other languages.
The IBM Systems Environmental Notices (http://ibm.co/1fBgWFI) includes
statements on limitations, product information, product recycling and disposal,
battery information, flat panel display, refrigeration and water-cooling systems,
external power supplies, and safety data sheets.
xviii Storwize V5000: Quick Installation Guide

About this guide
This publication provides information that helps you install and initialize IBM
Storwize V5000 systems.
Who should use this guide
This guide is intended for installers of Storwize V5000 systems.
Before configuring your system, ensure that you follow the procedures as listed. Be
sure to gather IP addresses that you will need before you begin the installation.
Storwize V5000 library and related publications
Product manuals, other publications, and websites contain information that relates
to Storwize V5000.
IBM Knowledge Center for Storwize V5000
The information collection in the IBM Knowledge Center contains all of the
information that is required to install, configure, and manage the system. The
information collection in the IBM Knowledge Center is updated between product
releases to provide the most current documentation. The information collection is
available at the following website:
http://www.ibm.com/support/knowledgecenter/STPVGU
Storwize V5000 library
Unless otherwise noted, the publications in the library are available in Adobe
portable document format (PDF) from a website.
ibm.com/shop/publications/order
Click Search for publications to find the online publications you are interested in,
and then view or download the publication by clicking the appropriate item.
Table 1 lists websites where you can find help, services, and more information.
Table 1. IBM websites for help, services, and information
Website Address
Directory of worldwide contacts http://www.ibm.com/planetwide
Support for Storwize V5000 (2077 or 2078) www.ibm.com/support
Support for IBM System Storage®and IBM TotalStorage products www.ibm.com/support/
Each PDF publication in the Table 2 on page xx library is also available in the IBM
Knowledge Center by clicking the number in the “Order number” column:
© Copyright IBM Corp. 2013, 2015 xix

Table 2. Storwize V5000 library
Title Description Order number
IBM Storwize V5000 Quick Installation
Guide
The guide provides instructions for
unpacking your order and installing
your system. The first chapter
describes verifying your order,
becoming familiar with the hardware
components, and meeting
environmental requirements. The
second chapter describes installing
the hardware and attaching data
cables and power cords. The last
chapter describes accessing the
management GUI to initially
configure your system.
IBM documentation and related websites
Table 3 lists websites that provide publications and other information about the
Storwize V5000 or related products or technologies. The IBM Redbooks®
publications provide positioning and value guidance, installation and
implementation experiences, solution scenarios, and step-by-step procedures for
various products.
Table 3. IBM documentation and related websites
Website Address
IBM Publications Center ibm.com/shop/publications/order
IBM Redbooks publications www.redbooks.ibm.com/
Related accessibility information
To view a PDF file, you need Adobe Reader, which can be downloaded from the
Adobe website:
www.adobe.com/support/downloads/main.html
IBM Publications Center
The IBM Publications Center is a worldwide central repository for IBM product
publications and marketing material.
The IBM Publications Center website offers customized search functions to help
you find the publications that you need. You can view or download publications at
no charge. Access the IBM Publications Center through the following website:
ibm.com/shop/publications/order
Related websites
The following websites provide information about Storwize V5000 or related
products or technologies:
Type of information Website
xx Storwize V5000: Quick Installation Guide