Icera St. Thomas S-230 User manual

© 2014 |Icera USA |St. Thomas Creations www.icerausa.com |www.stthomascreations.com
Don’ts:
-Don’t clean the seat with scouring
powder.
-Don’t use any strong chemical
cleansers or abrasive brushes.
-Don’t keep chemicals/cosmetics
near seat.
Please do not place heavy objects on cover.
Avoid sitting forcefully/suddenly on the seat or
cover.
S-230/231/233 Seat Installation Instructions
Please read the instructions carefully. Get to know our seats and get prepared with the required tools in
advance. Follow the instructions to install the seat correctly to avoid damage.
Please keep the instructions readily available after reading carefully.
Please subject to the real product when the instructions differ. If there is any update to the product and/or its
accessories, we will give no further notice.
BEFORE INSTALLATION
MAINTENANCE
Do’s:
-Wipe the toilet seat with soft, wet
cloth
-Clean the toilet seat with a neutral
cleanser, then dry with a clean
cloth
CAUTIONS
Please do not close
the seat or cover
forcibly. This will
extend the soft-close
function’s lifespan.
Please do not clean seat or cover with strong
chemicals or rigid brushes to avoid harming
material.
Please do not expose seat or cover to direct
sunlight or high temperatures for too long to
avoid warping and color fade.

© 2014 |Icera USA |St. Thomas Creations www.icerausa.com |www.stthomascreations.com
Step 1) Insert plastic screw into bolt hole,
place plastic washer and seat post, then
insert screw into the slotted area.
Step 2) Using a Phillips head screwdriver,
tighten the screw to the plastic anchor.
Leave it loose enough to adjust the seat to
the bowl.
Step 3) Place toilet on metal seat posts.
Make sure it locks into place.
Step 4) To remove the seat, press the 2
inner buttons and lift the seat upwards.
Please check to ensure that you have the necessary hardware.
1- Seat Caps, 2- Phillips head screws, 3- Metal Seat Posts, 4- Clear, plastic washer, 5- Plastic screw