ICHRoboter Pool Cleaner User manual

Pool Cleaner
User Manual
For Warranty and Maintenance contact our
sales&Service Team on 1300886609 or Email
[e-mail]
www.roboticpoolcleaning.com,au

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
Catalogue
Sponge Wheel
4.5 Water Joint 10
218
218
Safty Warnings
Functions
Product Specifications
Parts List
Start Up Procedure
Proper Shut Down and Care
Remote Control
Maintenance
Packing List
Product Overview
19
6 Troubleshooting and Warning Lights
7 Safty Checklist
5.4 Filter Bag
5.3 Drive Belt

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
1 Safety Warnings
Please read this manual carefully before using the Pool Cleaner.
- 1 -
Before performing maintenance or service on the Pool Cleaner please
ensure the power is disconnected to avoid personal injury or property loss.
The Pool Cleaner is designed for use in swimming pools only. Any other
use is prohibited and will void manufacturers' warranty.
Do not swim in the pool whilst the Pool Cleaner is in use in order to avoid
personal injury.
Do not allow the Power Box to come in contact with water, and it is
recommended to be placed in a shady, dry and ventilated area.
When in use, the Power Supply and Caddy Cart must remain 3 meters
away from the edge of the pool.
Do not use the Pool Cleaner if there is a chance of thunder storm to avoid
personal injury.
Users are only permitted to perform maintenance described in this manual.
Any tampering with the Motor Box or Power Supply will void the
warranty.
Ensure the Pool Cleaner is fully submerged before turning the Power Box
on.
If the Pool Cleaner is not going be used for a long time, make sure to
disconnect the power, keep it clean and put it in a safe, dry and
well-Ventilated area.
If the Pool Cleaner stops working, please refer to
local distributor.
The optimum working temperature for the Pool Cleaner is between10℃
and 32℃, avoid direct sunlight when not in use.
The Pool Cleaner is suitable for the swimming pools no deeper than 3
meters or 2.5 meters when used with Floating Battery.
Lift the Pool Cleaner out of the water using the robot handles, do not lift
the iCleaner using the Floating Cable. Lifting via the cable voids warranty.
section 6
“Troubleshooting”. If you cannot find the root cause, please contact your

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
2 Product Overview
2.1 Functions
◇ Automatic Cleaning: the default mode is automatic, however, this can be overridden using the
Remote Control. When the Remote Control is not being used, the Pool Cleaner will return to
automatic mode.
◇ Overall Cleaning: the Pool Cleaner not only cleans the floor of your pool, it also cleans the
wall, at the same time, the Pool Cleaner will filter water, and the dirt will be collected into
Filter Bag.
◇ Timing Cleaning: you can select one of three cleaning time with Remote Control (0.5h, 1h or
2 h). The Pool Cleaner will shut down automatically when the selected cycle time is over.
◇ Manual Cleaning: the Remote Control can be used to clean specific areas immediately.
◇ Self Protection (out of water): Impeller decelerates to a stop in twenty five seconds if the Pool
Cleaner senses it is no longer in water, to prevent personal injury and to protect the water
pump.
◇ Stop Protection: the Pool Cleaner will stop if foreign matter retards the Impeller.
2.2 Product Parameters
Pool Cleaner
100~240VAC, 50-60Hz
200W
0.5Hr/1Hr/2Hrs
15m
3
18m /h
15m/min
Host: IP68
Model
Input Voltage
Rated Power
Cycle Time
Floating Cable Standard Length
Filter Bag
Water Pump Capacity
Moving Speed
Optimum Storage Temperature
Optimum Working Temperature
Dimension（L*W*H）
Grade of Waterproof
- 2 -
70μm
10~32℃
0~40℃
462.5*453*282mm
Gross Weight
574*574*413mm
Packing Measurement(L*W*H)
20.6kg
This appliance can be used by children aged from 8 years and above and persons
with reduced physical,sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved.Children shall
not play with the appliance.Cleaning and user maintenance shall not be made by
children without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer,its service
agent or similarly qualified persons in order to avoid a hazard.
Power Box : IP23
Floating Battery: IP68

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
2.3 Parts List
Main Body Parts
Guide Vane
（Pic.2.3.2）
- 3 -
Drive Belt
Water Joint
Base Plate
Base Plate Latch
Fillter Net
Support Frame
Water Retaining Board
Motor Box
Filter Net
※

※ Power Box Parts
- 4 -
HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
Upper Cover
Key Board
Bottom Cover
Power Socket
Cable Socket
POWER 0. 5h 1h 2h climb
(Pic.2.3.4)
Power Climb Timer Direction Light

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
1
1
9Floating Cable
Filter Bag 20μm
（Pic.3.2.1）
- 5 -
1
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
3 Packing List
Part Name
Unit Body
Power Box
Remote Control
Battery
Guide Vane
User Manual
Warranty Card
Certificate of Quality
Serial
Number Remarks
Host
Quantity
1
Spare parts
10
23465
1 0
9
78

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
4 Product Operation
4.1 Power Connection
※ Please connect the Floating Cable to the Cable Socket of Power Box (see Pic.
4.1.1), then connect the Power Box to an outside AC power of 100v/240v
50/60Hz (see Pic.4.1.2). For the complete connection guide please refer
Pic.4.1.3
Notices: Do not allow the Power Box to come in contact with water.
Please ensure the Power Box is kept in a shady, dry & ventilated area.(Refer Page 1.Safety Warning)
- 6 -
(Pic.4.1.1) (Pic.4.1.2) (Pic.4.1.1) (Pic.4.1.2)
2
3
2
3
5
6
2
3
2 Power Box
3 Floating cable
5 Power Socket
6 RCD
5
6
2
3
2 Power Box
3 Floating c abl e
5 Power Sock et
6 RCD
Outside AC
power
Power line
Cable

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
4.2 Start Up Procedure
(1) When placing the Pool
Cleaner in the pool: you
mus t wo bbl e th e Po ol
Cleaner according Pic.4.2.1
to make sure the air inside is
released when you put the
Pool Cleaner in the water, so
it will automatically sink to
the bottom of pool.
（Pic.4.2.1）
- 7 -
（Pic.4.2.2）
(2)Start : press “ ”button,
LED “power” indicator and
“0.5H” cycle time LED will
illuminate(see pic.4.2.2).
you may select 0.5Hr, 1Hr or
2Hrs cleaning time using the
“ ” button on the Remote
Control and relative LED
indicators will illuminate on
the Power Box when selected.

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
4.3 Proper Shut Down and Care4.3 Proper Shut Down and Care
(1) To Shut Down the Pool Cleaner:
turn the “ ” on the Power Box to the
off position, once the Pool Cleaner
finishes working, pull the Floating
Cable slowly until the Handle emerges
from the water (Pic.4.3.1), and then pull
the Pool Cleaner out of the pool by its
Handle.
(2) Clean Pool Cleaner: invert the Pool Cleaner gently onto the floor, unlock the
Latch on the Base Plate (Pic4.3.2) and remove the Filter Bag from Base Plate,
clean the Filter Bag (Pic.4.3.3). Once clean the Filter Bag on its frame,
reassemble the Base Plate and put it back into the Pool Cleaner once the Filter
Bag is dry.
(Note: when re-fitting the Filter Bag to the Base Plate, please ensure the long
sides of the Filter Bag are smooth to ensure an easy fit into the base of the Pool
Cleaner.)
6
4
OPEN
Pull
3
4 Floating Cab le
6 Handle

- 9 -
The Remote Control (Pic.4.4.1) includes:
On/Off Power Button
LED Light Indicator
Direction Button
Timer Button
Floor and Wall/Floor Only Cleaning
On/Off Power Button:
Turn on or turn off Pool Cleaner
Direction Button:
Control Pool Cleaner's movement Backward , Left Rotation and Right
Rotation
Timer Button :
Select the timing mode from 0.5hour, 1 hour and 2hours
Floor and wall/ Floor Only Cleaning :
To clean the “Floor and Wall” press . To return to “Floor Only Cleaning” press .
（Pic.4.4.1）
Floor and Wall/
Floor Only Cleaning
(3) Pool Cleaner Storage: when the Pool Cleaner is dry, disconnect the floating
cable reel it in hand-over-hand and place on the Pool Cleaner, then store the
Pool Cleaner in a dry, well-ventilated area. If you have the Caddy, please put the
Pool Cleaner & Floating Cable on to the Caddy Cart, details please refer
Pic.4.3.4
HANGZHOU GAOYUE TECHNOLOGY CO., LTD.

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
- 10 -
Step 2
※ Screw down the Lock Nut
clockwise. (Pic.4.5.2)
（Pic.4.5.2）
Step 1
※ Insert Water Joint into Pool
Cleaner. (Pic.4.5.1)
（Pic.4.5.3）
Step 3
※ Fix the Floating Cable as
(Pic.4.5.3).
4.5 Water Joint

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
5 Maintenance
5.1 Impeller
※ Replace the Impeller if the old one gets worn or damage.
Step 2
Use a Phillips Head Screw
Driver to remove the bolt in the
I m p e l l e r a c c o r d i n g t h e
diagram.(Pic.5.1.2)
※
Step 3
Replace the new Impeller
and assemble Impeller and
Guide Vane
※
- 11 -
Guide Vane
Guide Vane
Step 1
※ Rotate Guide Vane clockwise
to remove from the Pool Cleaner.
(Pic.5.1.1)

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
OPEN
5.2 Sponge Wheel
※ Replace the Sponge Wheels if they are badly worn or broken
- 12 -
（Pic.5.2.2）
Latch
Step 1
Invert the Pool Cleaner
on the floor, remove the
Base Plate(push Latch to
unlock the Base Plate).(Pic.5.2.1)
※
Step 2
※
Remove the Filter Net from
the Pool Cleaner while
pressing the Latch according
to the diagram.(Pic.5.2.2)

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
Step 4
Remove the Rolling Brush.
(Pic.5.2.4)
- 13 -
（Pic.5.2.3）
（Pic.5.2.4）
Transmission Components
Side Cover
Rolling Brush
Step 3
※
Using a Phillips Head Screwdrive
and 7mm ring spanner undo the six
bolts and nuts on the Side Cover,
to remove the Side Cover.
(Pic.5.2.3)
※

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
Step 6
※Assemble the Rolling
Brush to the Axle
(Pic.5.2.6) .
（Pic.5.2.5）
14
Wheel Axle
Step 5
Slide the old Sponge Wheels off,
and replace with new Sponge Wheels (Pic.5.2.5)
※

- 15 -
（Pic.5.2.7）（Pic.5.2.8）
Step 7
※ Reassemble
the Transmission
Components and
Side Covers to the
body of the
unit.(Pic.5.2.7)
Step 8
※ Fasten the Transmission
C o m p o n e nt s a n d S i d e
Covers to the body of the
unit using the nuts and
bolts.(Pic.5.2.8)
Step 9
※ Put the Filter Net into the Pool
Cleaner, press down on the Filter Net
until the Latch locks into the Bracket.
(Pic.5.2.9)
（Pic.5.2.9）
Step 10
※ Place the Base Plate into Pool
Cleaner, pressing down until the Latches
lock into place. (Pic.5.2.10)
※Replacing the Sponge Wheels is now
completed.
（Pic.5.2.10）
Latch
HANGZHOU GAOYUE TECHNOLOGY CO., LTD.

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
When the Filter Bag is dirty as
shown in pic. 5.4.1 or if the Filter
Bag has been damaged, please
refer to chapter 4.3.2 to replace
Filter Bag.
5.4 Filter Bag
Pic.5.4.1 Filter Bag is full
- 16 -
5.3 Drive Belt
Replace the Drive Belt
if they are broken(Pic 5.3.1)
Pic.5.3.1 Replace the Drive Belt
Drive Cover
Drive Belt
※ Using a Phillips Head Screwdriver
Spanner undo the bolds and nuts then
remove the Drive Ccover and replace
the Drive Belt. (Pic.5.3.1)

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
6 Troubleshooting and Warning Lights
Common Fault Reason Solution Remarks
Pool Cleaner
doesn't work
Weak pumping
Pool Cleaner is
turning to one side
when it moves
Pool Cleaner will
not climbs wall
Dirt is coming
through the
Guide Vane.
The Socket is
not plugged in
Connection is wrong
Impeller is jammed or
dirty
Impeller is damage
Filter Bag is full
Drive Belt is loosen
or broken at one side
The Filter Bag is full
Filter Bag is full
Drive Belt is
loosen or broken
Sponge Wheel wear
Axis Sleeves wear
The Sponge Wheel
don't soak enough
It has air inside
the machine
Belt of Filter Bag is
loosen or broken.
Plug in the Power Lead
Check the connection
Clean the Impeller
Replace the Impeller
Clean the Filter Bag
Clean Filter Bag
Clean the Filter Bag
Replace the Drive Belt
Replace Axis Sleeves
Please turn
off the power
before you
perform any
maintance
on the
Pool Cleaner
Note: The Power Box MUST BE DISCONNECTED from the Power Supply prior to
conducting any maintenance on the Pool Cleaner. Contact your local distributor, or place of
purchase for problems not covered in Trouble Shooting Guide.
- 17 -
Pool Cleaner will
not sink to the
bottom of the pool
Hold Pool Cleaner in
water and make sure
Sponge Wheel soak
enough, normal time is
about 5-15 minutes
Wobble Pool Cleaner and
make sure air released
Replace the Drive Belt
Replace the Sponge Wheel
Replace the filter bag
or use a 20μm filter bag

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
- 18 -
Indicator
light Solution
Failure
Green light
flashing Water
protection
1.Check whether the impeller is damaged;
2.Check whether the water pump motor is working;
3.Put the robot in the water.
Yellow light
flashing
Water pump
motor
overheating
1.Check whether water pump motor and impeller
about exceptions
2.After waiting for temperature cooling to electring
Blue light
flashing The roboter
turned over 1.Adjust the machine to the level state.
Blue and green
lights flashing
at the sametime
Walking motor
overload 1.Check whether travel mechanism about exceptions.
Blue 、 green
and yellow
lights flashing
at the sametime
Water pump
motor
overload
1.Check whether water pump motor and impeller
about exceptions.
Indicator
light Solution
Failure
Green light
flashing
The Pool Cleaner
has stopped
due to lack
of water
Return the robot to deeper water and restart
Yellow light
flashing
The Motor Pump
inside the robot
has over heated
Contact the supplier for support
Blue light
flashing The robot is
upside down
Turn the Pool Cleaner over, and restart using
the Remote Control or Power Switch
Blue and green
lights flashing
The Walking
(Drive Wheel)
Motors are
over loaded
1.Check the Walking Motors, Drive Belt and
Tracking Belts for debris or damage.
2. Clear bebris or replace parts parts and restart
the Pool Cleaner.
Blue 、 green
and yellow
lights flashing
The Water Pump
is over loaded
1.Turn the robot off, check the Impeller for debris,
or damage.
2.Clear or replace Impeller, then restart the
Pool Cleaner.