iComfort IC1020 User manual

IC1020
THERAPEUTIC MASSAGE CHAIR
FAUTEUIL DE MASSAGE THÉRAPEUTIQUE
USER MANUAL
MANUEL DE
L’UTILISATEUR
Built-in MP3 and headphones
MP3 intégré et casque d’écoute
MASSAGE CHAIR
FAUTEUIL DE MASSAGE

TOLL FREE CUSTOMER SERVICE /
SERVICE À LA CLIENTÈLE SANS FRAIS
1 866 967.7333 ext. 227
PLEASE DO NOT RETURN
THIS PRODUCT TO THE STORE
FOR QUESTIONS OR ASSISTANCE ON ASSEMBLY, PARTS OR OPERATION,
CONTACT OUR CUSTOMER SERVICE!
S’IL VOU3PLAÞT, NE RENVOYEZ PAS
CE PRODUIT EN MAGASIN
POUR TOUTE QUESTION OU AIDE CONCERNANT LE MONTAGE,
LES PIÈCES OU LE FONCTIONNEMENT,
CONTACTEZ NOTRE SERVICE À LA CLIENTÈLE!
TOL
TOL
L F
SER
SER
VIC
1
1
8
CE P
POUR TOU
LES PIÈC
CO
NT

1
Thank you for purchasing this product. Please read this instruction manual carefully
before operating this massage chair.
Please pay attention to the important safety warnings and keep this manual
for future use.
Note: EBI reserves the right to revise the design and description of this product
without notice.
CONTENTS
1. Safety warning ................................................................................................ 2
2. Environment.................................................................................................... 2
3. Restrictions..................................................................................................... 3
4. Maintenance................................................................................................... 3
5. Troubleshooting............................................................................................... 3
6. Features and benets...................................................................................... 3
7. Installation...................................................................................................... 4
8. Components ................................................................................................... 7
9. Operation........................................................................................................ 9
10. Floor protection............................................................................................. 16
11. Moving the chair ........................................................................................... 17
12. Product specications................................................................................... 17
13. Warranty ....................................................................................................... 18
FRANÇAIS........................................................................................................... 21

2
1. SAFETY WARNING
• This product is not recommended for children.
• Disconnect the chair before cleaning.
• Please pull out the plug after use or before cleaning to avoid injury or damage
to the product.
• Please operate this product according to the instructions in this manual.
• Use only accessories recommended by iComfort®.
• This product is designed for indoor use only.
• Recommended use time is 30 minutes or less.
• Please avoid use if the chair is damaged and call your iComfort® technician
or dealer.
• Make sure the chair ventilation holes in the lower back behind the chair are well
ventilated and not obstructed.
• Please make sure small objects are not dropped into the chair mechanism.
• Use of this chair under the inuence of drugs or alcohol is not recommended.
• Do not use wet hands to pull the AC cord.
• Do not spill liquids onto this product to avoid electric shock or cause damage
to this product.
• Maintain your chair and avoid damaging the wires.
• Do not use a wet cloth to clean the electric parts.
• In the event of a power failure disconnect the chair.
• If the chair works abnormally, stop using it, disconnect the chair and call your
iComfort® service technician or customer service representative.
2. ENVIRONMENT
This chair should be used only in a well ventilated, normally dry and dust free environment.
3. RESTRICTIONS
People with osteoporosis, heart disease and heart pacemakers, pregnancies,
injuries or any other health related issues should consult their doctor before using
this massage chair.
Stop immediately the use of this massage chair if you feel unwell
and consult your doctor.

3
4. MAINTENANCE
• This product should only be maintained by iComfort® certied technicians.
Otherwise, EBI reserves the right to void the warranty.
• Disconnect the power cord after use.
• Make sure the wall outlet is in good working order before use.
• If this chair will not be used for an extended period of time,
store in a dry and dustless environment.
• Avoid chair exposure to high temperatures and direct sunlight.
• Clean this product with a dry cloth. Do not use thinner, benzene or alcohol.
• When moving the chair on wood oor, rough ground or in a narrow space
two people should lift the chair together.
• We recommend to use the massage chair intermittently
and not for long time periods.
5. TROUBLESHOOTING
• It is normal for the motor to make noise while in use.
• If the controller doesn’t work normally, please check that the plug and socket are
properly connected and the switch is turned on.
• When the programmed working time is over, the chair will power-off automatically.
• After several use, the chair might power-off because of overheat. It can be used
again after half an hour of cooling time.
6. FEATURES AND BENEFITS
Enjoy a full en invigorating massage with the iComfort® ic1020 massage chair.You will feel as
if you had your very own massage therapist.The Body Scanning Technology actually maps the
back of each individual user in order to provide a customized massage.The handy retractable
footrest gives you maximum conguration options.The iComfort® ic1020 massage chair
reproduces over 6 massage actions all with the sensation of a professional massage in the
comfort of your very own home! The iComfort® ic1020 massage chair will provide you with many
years of soothing massage and comfort.
• Contemporary design with high-quality soft touch leatherette.
• 6 massage modes: kneading, Shiatsu, Rolling, Knocking, Knap and vibration
to create some of the best massages you have ever felt.

4
• Sophisticated leg and foot massage.
• 15 airbags for a complete massage experience.
• 4 head rotating massage mechanism for smooth wrist movement simulation.
• Built-in MP3 player, USB Key, SD card amplier and headphones with music
synchronization.
• The LCD backlit remote control indicates the type, speed, intensity and area
of the massage being performed.
• Power recline feature up to 165 degrees with separate recline/incline controls.
• Retractable footrest.
7. INSTALLATION
The ic1020 massage chair comes partly assembled.
• Assemble this massage chair according to the installation instructions provided
in this guide.
• Check the parts list carefully to make sure nothing is missing.
• Sitting in the massage chair before it is completely assembled could result
in permanent damage to the chair and personal injury.
This massage chair is equipped with a cord having a grounding conductor.
The AC connector must be plugged into an appropriate socket that is properly
installed and grounded.
If the massage chair fuse is burned out, please turn the chair off and unplug
the power. You can open the lid covering the fuse located in the switch box
at the bottom of the chair in the back.
A) Unplug the chair from the AC wall outlet.
B) Unscrew the fuse cover underneath and behind the chair.
C) Remove the fuse and replace it with an identical fuse type then screw back
the fuse cover.
You can call iComfort® at 1-866-967-7333 ext 227 if you need help.
CAUTION: Never substitute a missing part with one of your own. If a part is missing,
contact customer service at: 1-866-967-7333 ext 227

5
STEP 1: Unpacking
1. Remove the massage chair from the box.
2. Remove all plastic wraps from the massage chair, cushions, bags, etc.
When positioning the chair, make sure there are at least 60 cm of free space behind
the backrest and 60 cm of space in front of the footrest.
STEP 2: Install the back cushion and pillow pad.
STEP 3: Install the remote control stand
1. Install the remote control on the right side of the massage chair using the small
predrilled holes with the supplied screws.
2. Insert the remote control on the stand.
3. You can adjust both the vertical and horizontal angle of the remote control
for better viewing.

6
STEP 4: Install the coffee table stand
1. Install the coffee table stand on the left side of the massage chair using the small
predrilled holes with the supplied screws.
2. Install the coffee table on top of the stand using the predrilled holes
with the supplied screws.
STEP 5: Final Installation
1. Insert the AC power cord into the wall outlet
2. Turn on the main power switch on the lower back behind the massage chair
(The LCD on the remote control will light up).
3. Enjoy a comfortable massage

7
8. COMPONENTS
Massage chair
Front view
1. Detachable pillow pad
2. Remote control
3. Armrest
4. Headphone
5. Seat cushion
6. Calf massage section
7. Foot massage section
8. Back cushion
9. Coffee table

8
Back View
10.Back cover
11.Ventilation holes
12.Remote control stand
& headphone holder
13.Back cover
14.MP3 player compartment
15.Wheels
16.Massage chair base
17.AC cable
18.Headphone connector
19.AC cable connector
20.Main On/Off switch

9
21.Fuse box
Remote control
9. OPERATION
1. Once the massage chair is connected to a wall outlet, turn on the power switch
behind the massage chair at the bottom. The remote control will light up.
2. Adjust the legs and backrest angle at the desired position using the buttons at the
bottom of the remote control. This will ensure the correct massage mechanism’s
positioning.

10
Leg and back section angle adjustments: You can adjust the angle of the leg section
by pressing on the leg up or down button.
You can also adjust both the leg and back section simultaneously for the desired seating
position.
3. Press the power ‘On’ switch on the remote control. Once activated, the ic1020
massage chair will ‘measure’ the length of your spine and after about 7 seconds
start the automatic full body massage. Pressing again turns off the chair.
9. 1. AUTOMATIC MASSAGE ADJUSTMENTS
Back massage area: You can choose a specic massage area for the back during
the automatic massage mode. Upper body (full back), Neck & shoulder (upper back)
or back waist (lower back).

11
9. 2. MANUAL MASSAGE MODE
You can activate the manual massage mode at any time during the automatic massage
mode. Press on the desired massage type: Knead, Flap, Knead and Flap, Shiatsu
or knock. Then select the massage speed (5 speed choices) and the massage width
(3 choices between normal, narrow and large).
Shoulder height: To choose a specic massage area on the back, press the upward
or downward button.
The Back Stretch button: to further complement the manual massage mode, this button
will activate the movement the massage mechanism down and then up to simulate
stretching.
9. 3. OTHER MASSAGE FUNCTIONS
The ic1020 has many other massage functions that you can use during the automatic
or manual massage mode.
Vibration massage mode: You can add a vibration massage to the back, buttocks
and calf area during the automatic or manual massage modes.

12
There are two intensity levels of vibration for each area displayed with the following
symbols:
Back vibration Buttocks vibration Calf vibration
Lower body airbag massage mode: You can adjust, change or remove the lower body
airbag massage feature during the automatic or manual massage mode.
Pressing on the Airbag button will activate or deactivate the lower body airbag massage
feature. Activation is displayed on the screen of the remote control.
Pressing on the Mode button repeatedly will activate one of the four airbag massage
modes during the automatic massage mode or during a manual massage mode.
Each mode concentrates the airbag massage in a different area.

13
You can press on the Intensity button if you desire to decrease or increase the airbag
pressure (intensity). There are two adjustments level.
During the automatic and manual massage mode, the remote control display will
indicate where the airbags are activated.
9. 4. MP3 MUSIC FEATURE

14
The MP3 music player is situated at the back of the ic1020.
1. Insert the provided SD memory card into the back of the USB adapter.
2. Insert the USB adapter with the SD memory card into a USB port on a PC
computer (Windows XP, 2000, NT and Windows 7). The SD memory card
will be recognized as a removable disk.
3. Download or drag your favorite MP3 type songs from your PC
into the SD memory card.
4. Disconnect safely the USB adapter with the SD memory card from the PC.
5. Turn off the power of the massage chair and open the cover of the MP3 box
behind the chair.
6. Insert the SD memory card into the SD card port of the MP3 box and put the MP3
box back to its original location. Close the cover of the MP3 box.
7. Turn on the power of the massage chair.
To play your favorite music using the provided headphones, use the dedicated buttons
on the remote control. Pressing on the play button will play the rst song.
Pressing again will stop the MP3 player.
Press on the previous music tune button to play the previous music tune.
Press on the next music tune button to play the next music tune.

15
The music synchronization feature will adjust the vibration massage to function
at the same rhythm as the music being played. This adds to the enjoyment
of the massage experience. Pressing again on this button will deactivate the feature.
Note: There are already a few MP3 music les on the provided SD memory card.
They can be erased if you prefer.
Automatic original positioning feature: When the automatic massage mode or manual
massage is nished, you can press on both the ‘Auto’ and ‘leg down’ button.
The ic1020 will then return to its original position. The back section will completely
go up and the leg section will completely come down.
10.FLOOR PROTECTION
Prolonged use of this massage chair can damage wood oors. In order to prevent
permanent damage, place a carpet or protective mat under the chair.

16
11.MOVING THE CHAIR
Disconnect the power cord and headphones and place them on the massage chair seat.
Lift the leg and foot section until you feel the chair moving forward or backward easily.
The chair should be tilted up to about 30 degrees.
12.PRODUCT SPECIFICATIONS
Weight Net: 105kgs
Dimensions: 77 cm x 167 cm x 73.5 cm
Power: 180 Watts
Voltage: 110V, 60 Hz

17
13.WARRANTY
LIMITED ONE (1) YEAR WARRANTY
This product is guaranteed against all manufactured faults and defects for a period
of One (1) year from the date of purchase.
For repairs or product defects, please call our customer service department at:
1-866-967-7333 ext 227. Please have your proof of purchase on hand. If we are not
able to replace your defective part, we will send you a service technician for repairs.
Important notes: Any damages caused by an accident or an abusive usage are NOT
covered under warranty. We also decline all responsibility concerning indirect
or consecutive damages. In certain Canadian provinces, it is not permitted to limit
indirect or consecutive damages. Therefore it is possible these limitations are not
applicable to you. This warranty gives you specic legal rights. You may also have other
legal rights which vary from one province to another.

18
Imported by
EBI Inc. (iComfort)
120 Boul des Entreprises
Boisbriand, Québec, Canada J7G 2T3
1-866-967-7333
www.ebiweb.ca
Made in China
CUSTOMER SERVICE: 1-866-967-7333 ext 227
You can also ll out the registration card on our website at www.iComfort.ca