ICOP Technology PPC-090T-D3 User manual

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 i
User’s Manual
PPC-090T
DMP Vortex86 DX2 / DX3 Processor
Compact Panel PC with 9” Touchscreen
PPC-090T-D2 Series with DX2 processor
PPC-090T-D3 Series with DX3 processor
(Revision 1.10A)

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 i
REVISION
DATE VERSION DESCRIPTION
2014/1/22 Version 1.0A New Release
2014/3/11 Version 1.1A Add 4.3 Serial Ports Setting (RS232/422/485)
2015/9/15 Version 1.2A Change the SPEC of Section 3.1
1. Add the type with 2GB DRAM solution
2016/1/6 Version 1.3A 2. Correct LED backlight lifetime
3. Doesn't support DOS Touch Driver
1. Change J33~J36 connectors as optional
2016/4/28 Version 1.4A (They are for I/O Extension board.)
2. Add the information of DX3 & extension board.
3. Correct the weight of whole system.
2016/10/19 Version 1.5A 1. Add USB WLAN solution as optional.
2. Add the ordering information of SATA SLIM
storage.
2016/11/05 Version 1.6A Correct 16bit GPIO port on section 5.1.
2016/11/30 Version 1.7A Correct 16bit GPIO port on section 5.2.
2016/12/19 Version 1.8A Specification correction
1. Panel mounting: M3 screws maximum torque
0.44Nm (4.5 kgf‐cm).
2017/04/13 Version 1.9A 2. Add serial number code on section 1.6.
3. Add pin assignment for PoE on RJ45.
4. Add IEE 802.3at standard PoE+ pinout on
section 5.2
5. Specification correction

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 ii
DATE VERSION DESCRIPTION
2018/06/08 Version 1.10A Correct the PoE+ pinout on section 5.2

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 i
COPYRIGHT
The information in this manual is subject to change without notice for
continuous improvement in the product. All rights are reserved. The
manufacturer assumes no responsibility for any inaccuracies that may
be contained in this document, and makes no commitment to update or
to keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or
transmitted, in whole or in part, in any form or by any means without the
prior written permission.
Manual # IUMPPC090T-01 Ver.1.10A Jun, 2018
TRADEMARKS ACKNOWLEDGMENT
Vortex86DX2and Vortex86DX3are the registered trademark of
DMP Electronics Inc. Other brand names or product names appearing
in this document are the properties and registered trademarks
of their respective owners. All names mentioned herewith are
served for identification purpose only.
For more detailed information or if you are interested in other
products, please visit our official websites at:
For technical support or demo images of operating systems
download, please visit our websites at:
This Manual is for the PPC-090T.

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 ii
SAFETY INFORMATION
Read these Safety instructions carefully.
Please carry the unit with both hands, handle carefully.
Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
Do not expose your Panel PC to rain or moisture in order to prevent
shock and fire hazard.
Input voltage rated +12 ~ 24 VDC
Operating temperature between 0~+50°C (+32~+122°F).
Keep PPC-090T away from humidity.
When a Compact Flash Card or a SATA Slim is the main operating
system storage, please turn off power before inserting or removing.
Do not open the cabinet to avoid electrical shock. Refer to your
nearest dealer for qualified personnel servicing.
Never touch un-insulated terminals or wire unless your power
adaptor is disconnected.
Locate your Panel PC as close as possible to the socket outline for
easy access and to avoid force caused by entangling of your arms
with surrounding cables from the Panel PC.
USB connectors are not supplied with Limited Power Sources.
If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient overvoltage.
WARNING!
DO NOT ATTEMPT TO OPEN OR TO DISASSEMBLE THE CHASSIS
(ENCASING) OF THIS PRODUCT. PLEASE CONTACT YOUR DEALER
FOR SERVICING FROM QUALIFIED TECHNICIAN.

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 iii
Content
Content ....................................................................................................... iii
Ch. 1 General Information............................................................................1
1.1 Product Description ............................................................................2
1.2 Product Specifications ........................................................................3
1.3 Inspection standard for TFT-LCD Panel..............................................5
1.4 Product Dimensions............................................................................8
1.5 Panel Mounting Instruction ...............................................................10
1.6 Ordering Information.........................................................................12
Ch. 2 System Installation............................................................................14
2.1 CPU Board Outline ...........................................................................15
2.2 Connector Summary.........................................................................16
2.3 Connector Pin Assignments..............................................................17
2.4 External I/O Overview.......................................................................19
2.5 External I/O Pin Assignment.............................................................20
2.6 Watchdog Timer................................................................................21
Ch. 3 Hardware Installation........................................................................22
3.1 Installing the SATA Slim....................................................................23
3.2 Installing the Compact Flash.............................................................25
Ch. 4 Driver Installation..............................................................................26
4.1 PPC-090T Development Note ..........................................................28
4.2 BIOS Default Setting.........................................................................29
4.3 Serial Ports Setting (RS232/422/485)...............................................30
Ch. 5 Extension I/O (Optional)....................................................................37
5.1 Extension I/O Overview (Optional)....................................................38
5.2 Extension I/O Pin Assignment (Optional)..........................................39
Warranty.....................................................................................................40

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 1
Ch. 1
General Information
1.1 Product Description
1.2 Product Specifications
1.3 Inspection standard for TFT-LCD Panel
1.4 Product Dimensions
1.5 Mounting Instruction
1.6 Ordering Information

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 2
1.1 Product Description
We are proudly going to release a brand new Panel PC, which offers fanless design,
low power consumption, and IP65 front panel. The PPC-090T is powered by DMP’s
Vortex86DX2 and DX3 SoCs, the 3rd generation SoCs of Vortex86 family, and dual-
channel 1GB / 2GB DDRII (DDDRIII) chipset that handles processing more efficiently and
provides faster performance. The resistive touch panel with LED backlight TFT LCD
increases operation convenience and visibility in outdoor environments. The ultra-
compact and thin exterior design is perfect for the present demanding embedded and
productive applications.
The new PPC-090T inherited PDX/PMX-series’ smooth appearance and ultra-texture
aluminum exterior design to make your industrial applications look more stylish. The
versatile I/O ports, IP65 front panel, 10/100Mps Ethernet, GIGA high-speed Ethernet,
WLAN, etc. can fulfill fundamental functions. Our consistent advantages feature stable
performance, extended working temperature support, low power consumption and fanless
design. The expandable customize I/O ports can be accommodated connectivity
requirements to industrial machine platforms and industrial automation equipment’s needs.
The PPC-090Tsupports Windows Embedded CE 6.0, Windows Embedded Compact 7,
Windows Embedded Standard 2009, Windows Embedded Standard 7 and Linux to meet
ready-to-market demand and provide competitive advantages for customers.

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 3
1.2 Product Specifications
CPU BOARD SPECIFICATIONS
CPU
DM&P Vortex86DX2- 933MHz / DX3-1GHz
Cache
DX2: L1:16KB I-Cache, 16KB D-Cache
L2: 256KB Cache
DX3: L1:32KB I-Cache, 32KB D-Cache
L2: 512KB Cache
BIOS
AMI BIOS
Memory
512MB/1GB/2GB DDR2(DDR3) onboard
Watchdog Timer
Software Programmable from
30.5u to 512 seconds x 2 sets
LAN
Integrated 10/100M Ethernet X1
Giga Ethernet (Optional) X1
PoE (Optional)
Optional upon 10/100Mbps Ethernet x 1
Support IEEE 802.3AT
Audio
HD Audio-Realtek ALC262 CODEC
Internal Drives
Compact Flash Type I / II Slot
SATA SLIM, SD Slot (Optional)
I/O
RS-232/422/485 x 2
USB Ports (Ver2.0) x 3
PS/2 KB
Audio-Out
RJ-45 Port x 1
GIGA Ethernet Port X 1 (Optional)
MECHANICAL & ENVIRONMENT
Power Requirement
+12 ~ 24VDC
Power Consumption
+24VDC@ 1A
Operating Temperature
0~+50°C (+32~+122°F) /

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 4
-20~+60°C (-4~+140°F; DX2 with 800MHz)
Storage Temperature
-30~+70°C (-22~ +158°F)
Operating Humidity
0% ~ 90% Relative Humidity, Non-Condensing
Dimensions
242x156.5x44mm (9.68"x6.26"x1.76")
Weight
1.36 Kg
Protection
IP65 Front Panel
Certification
CE / FCC / VCCI / Vibration / Shock
LCD SPECIFICATIONS
Display Type
9” WSVGATFT LCD
Backlight Unit
LED
Display Resolution
1024(W) x 600(H)
Brightness (cd/m2)
300 nits
Contrast Ratio
500 : 1
Display Color
262,144
Pixel Pitch (mm)
190.5 (H) x 189 (V)
Viewing Angle
Vertical 120o, Horizontal 140o
Backlight Lifetime
18,000 hrs
TOUCHSCREEN
Type
Analog Resistive
Resolution
Continuous
Transmittance
80%
Controller
PS/2 interface
Software Driver
Linux, Win CE, Win XP, Win 7,
Windows Embedded Standard
Durability
1 million

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 5
1.3 Inspection standard for TFT-LCD Panel
DEFECT TYPE
LIMIT
Note
VISUAL
DEFECT
INTERNAL
SPOT
φ＜0.15mm
Ignore
Note1
0.15mm≦φ≦0.5mm
N≦4
0.5mm＜φ
N=0
FIBER
0.03mm<W≦0.1mm, L≦5mm
N≦3
Note1
1.0mm＜W, 1.5mm＜L
N=0
POLARIZER
BUBBLE
φ＜0.15mm
Ignore
Note1
0.15mm≦φ≦0.5mm
N≦2
0.5mm＜φ
N=0
Mura
It’ OK if mura is slight visible through 6%ND filter
ELECTRICA
L DEFECT
BRIGHT DOT
A Grade
B Grade
C Area
O Area
Total
C Area
O Area
Total
Note3
N≦0
N≦2
N≦2
N≦2
N≦3
N≦5
Note2
DARK DOT
N≦2
N≦3
N≦3
N≦3
N≦5
N≦8
TOTAL DOT
N≦4
N≦5
N≦6
N≦8
Note2
TWO ADJACENT DOT
N≦0
N≦1 pair
N≦1 pair
N≦1 pair
N≦1 pair
N≦1 pair
Note4
THREE OR MORE
ADJACENT DOT
NOT ALLOWED
LINE DEFECT
NOT ALLOWED
(1) One pixel consists of 3 sub-pixels, including R, G, and B dot. (Sub-pixel = Dot)
(2) Little bright Dot acceptitable under 6% ND-Filter.
(3) If require G0 grand (Total dot N≦0), please contact region sales.

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 6
[ Note 1 ] W: Width[mm]; L: Length[mm]; N: Number; φ: Average Diameter.
(a) White / Black Spot (b) Polarizer Bubble
[ Note 2 ] Bright dot is defined through 6% transmission ND Filter as following.
[ Note 3 ] Display area
C Area: Center of display area O Area: Outer of display area

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 7
[ Note 4 ] Judge the defect dot and the adjacent dot as following. Allow below (as A, B, C and
D status) adjacent defect dots, including bright and dark adjacent dot. And they will be counted
2 defect dots in total quantity.
R
R
G
G
R G
R
R
G
G
R G
R
R
G
G
R G
R
R
G
G
R G
R
R
G
G
R G
R
R
G
G
R G
R
RDefect Dot
Adjacent Dot
A
B
C
D
The defects that are not defined above and considered to be problem shall be reviewed
and discussed by both parties.
Defects on the Black Matrix, out of Display area, are not considered as a defect or counted.

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 8
1.4 Product Dimensions

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 9

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 10
1.5 Panel Mounting Instruction
1. Cut a mounting hole in the panel. (Refer to PPC‐090T Dimensions on page
11~12.) (Note 1)
2. Check and remove the twelve M3 screws in a diagonal pattern as image below if
necessary.
3. Place PPC‐090T face‐down on a clean, flat surface.
4. Slide the panel cutout around the back of PPC‐090T, until the panel rests
directly on the gasket. Make sure the screw holes align with the screw holes on
PPC‐090T.
5. The screw size is M3*L (L=wall thickness + 6.0mm) (Note 2)
6. Insert all twelve M3 screws into the screw holes. (Note 2)
7. Finger-tighten the M3 screws. Finish tightening the M3 screws in a diagonal
pattern using an M3 screw driver (see the image as below); maximum torque
0.44Nm (4.5 kgf‐cm).

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 11
Note 1:
It is strongly recommended that a professional machine shop cut the mounting hole in
the panel.
Note 2:
The length for all twelve M3 screws will be according to the thickness of mounting
panel. For example: The length of standard M3 screws for PPC-090T is 6mm. If the
thickness of your mounting panel is 3mm and washer thickness is 1mm, you have to
use 10mm M3 screw.

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 12
1.6 Ordering Information
Product
Code
LCD
Size
CPU Type
CPU Clock
RAM
Flash onboard
I/O
PPC
090T
104T
150T
D2 (DX2)
D3 (DX3)
W(800MH)
N(933MHz)
G (1GHz)
D (1GHz with
wide temp.)
3(512B)
4 (1GB)
5 (2GB)
N (No Flash)
A (256MB)
B (512MB)
C (1GB)
D (2GB)
E (4GB)
GE (GigaLAN)
G7C (GigaLAN + 7 COMs)
G7CP (GigaLAN + 7 COMs + PoE)
G5CG (GigaLAN + 5 COMs + 16bit GPIO)
G5CGP (GigaLAN + 5 COMs + 16bit GPIO + PoE)
7C (7 COMs)
7CP (7 COMs + PoE)
5CG (5 COMs + 16bit GPIO)
5CGP (5 COMs + 16bit GPIO + PoE)
1. Product Code：Code 1~3。
PPC：Panel PC Series。
2. LCD Size：Code 4~7。
090T：9”LCD with touchscreen。
104T：10.4”LCD with touchscreen。
150T：15”LCD with touchscreen。
3. CPU Type：Code 8~9。
D2：Vortex86DX2 CPU。
D3：Vortex86DX3 CPU。
4. CPU Clock：Code 10。
3：300MHz。8：800MHz。W：800MHz。N：933M
G：1GHz。D：1GHz with wide temp -20~60℃。(DX3 only)
5. RAM：Code 11。
3：512MB。4：1GB。5：2GB。
6. Flash Onboard：Code 12。
N：No Flash。A：256MB。B：512MB。C：1GB。D：2GB。
E：4GB。
7. I/O Code：Code 13~16。
GE or G：Giga Ethernet。
5C：Total 5 COM ports。(Standard 2 COMs + Extension board -> 3 COMs)
7C：Total 7 COM ports。(Standard 2 COMs + Extension board -> 5 COMs)
G：16bit of GPIO port。(Extension board -> 16bit of GPIO)
P：PoE Function。(Extension board -> PoE)

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 13
PART NUMBER
DESCRIPTION
PPC-090T-D2N4N
9” Panel PC w/DX2/1GB Memory
3USB/AUDIO/LAN/2COM/DC12~24V
PPC-090T-D2N4N-GE
9” Panel PC w/DX2/1GB Memory
3USB/AUDIO/LAN/GIGA LAN/2COM/
DC12~24V
PPC-090T-D2N4N-G7CP
9” Panel PC w/DX2/1GB Memory
3USB/AUDIO/LAN/GIGA LAN/7COM/ PoE
PPC-090T-D2W4N-GE
9” Panel PC w/DX2-800MHz/1GB
Memory/3USB/AUDIO/LAN/GIGA
LAN/2COM/DC12~24V/Wide Temp
PPC-090T-D3G4N
9” Panel PC w/DX3/1GB Memory
3USB/AUDIO/LAN/2COM/DC12~24V
PPC-090T-D3G4N-GE
9” Panel PC w/DX3/1GB Memory
3USB/AUDIO/LAN/GIGA LAN/2COM/
DC12~24V
PPC-090T-D3G5N
9” Panel PC w/DX3/2GB Memory
3USB/AUDIO/LAN/2COM/DC12~24V
PPC-090T-D3G5N-GE
9” Panel PC w/DX3/2GB Memory
3USB/AUDIO/LAN/GIGA LAN/2COM/
DC12~24V
PPC-090T-D3G5N-G7C
9” Panel PC w/DX3/2GB Memory
3USB/AUDIO/LAN/GIGA LAN/7COM/
DC12~24V
WLAN KIT (Optional)
USB-WLAN-IPEX-KIT
WIRELESS-ANTENNA-157MM
WIRELESS-CABLE-150MM
★Please contact your region sales for more ordering part numbers.

PPC-090T User’s Manual IUMPPC090T-01 Ver.1.10AJun, 2018 14
Ch. 2
System Installation
2.1 CPU Board Outline
2.2 Connector Summary
2.3 Connector Pin Assignments
2.4 External I/O Overview
2.5 External I/O Pin Assignment
2.6 Watchdog Timer