ICP DAS USA PIO-D24U User manual

PIO-D24U/D56U, PEX-D24/D56 Quick Start Guide ICP DAS CO., LTD.
1
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [email protected]
The package includes the following items:
Step 1: Setup the Windows driver. The driver is located at:
The UniDAQ driver supports 32-/64-bit Windows 2K/XP/2003/Vista/7/8; it
is recommended to install this driver for new user:
CD: \NAPDOS\PCI\UniDAQ\DLL\Driver
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
The PIO-DIO driver supports Windows 98/NT/2K and 32-bit XP/ 2003/
Vista/7/8. Recommended to install this driver for have been used PIO-DIO
series boards of regular user, please refer to :
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pio-dio/manual/quickstart
/classic/
For PIO-D24U/PIO-D56U
PEX-D24/PEX-D56
What’s in the shipping package?
Software Utility CD
(V5.2 or later)
Quick Start Guide
(This Document)
PIO-D24U
PIO-D56U
PEX-D24
PEX-D56
or
Installing Windows Driver
English/ Jun. 2013/ Version 1.0

PIO-D24U/D56U, PEX-D24/D56 Quick Start Guide ICP DAS CO., LTD.
2
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [email protected]
Step 2: Click the “Next>”button to start the installation.
Step 3: Check your DAQ Card is or not on supported list, then click the
“Next>”button.
Step 4: Select the installed folder, the default path is C:\ICPDAS\UniDAQ ,
confirm and click the “Next>”button.
Step 5: Check your DAQ Card on list, then click the “Next>”button.
Step 6: Click the “Next>”button on the Select Additional Tasks window.
Step 7: Click the “Next>”button on the Download Information window.
Step 8: Select “No, I will restart my computer later”and then click the
“Finish”button.
For detailed information about the driver installation, please refer
to Chapter 4 “Software Installation”of the user manual.
Step 1: Shut down and power off your computer.
Step 2: Remove the cover from the computer.
Step 3: Select an unused PCI/PCI Express slot.
Step 4: Carefully insert your I/O card into the PCI/PCI Express slot.
Step 5: Replace the PC cover.
Step 6: Power on the computer.
After powering-on the computer, please finish the Plug&Play steps according
to the prompted messages.
Installing Hardware on PC

PIO-D24U/D56U, PEX-D24/D56 Quick Start Guide ICP DAS CO., LTD.
3
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [email protected]
Pin Assignments

PIO-D24U/D56U, PEX-D24/D56 Quick Start Guide ICP DAS CO., LTD.
4
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [email protected]
1. Use the DN-37 (optional) to connect the CON3 on the board.
2. Connect the Port0 (PA0~PA7) with Port1 (PB0~PB7).
Self-Test
PIO-D24U/D56U
PEX-D24/D56

PIO-D24U/D56U, PEX-D24/D56 Quick Start Guide ICP DAS CO., LTD.
5
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [email protected]
1. The UniDAQ Utility.exe is located in:
This program (UniDAQ Utility) will be placed in the default path after completing
installation.
Default Path: C:\ICPDAS\UniDAQ\Driver\
Double click the “UniDAQUtility.exe”
2. Execute the UniDAQ Utility Program.
Confirm the PIO-D24/D56
series card had successfully
installed to PC. It start s from 0.
2
Double-Click
1
Click this button
to start test.
3

PIO-D24U/D56U, PEX-D24/D56 Quick Start Guide ICP DAS CO., LTD.
6
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [email protected]
3. Get DIO function test result.
Select the “Port 1”
Check channel 0, 2, 4, 6
6
Select the “Port 0”
8
The corresponding D/I becomes red
for channel 0, 2, 4, 6 of D/O is ON.
9
5
Click “Digital Output” item.
4
Click “Digital Input”item.
7
-Complete-

PIO-D24U/D56U, PEX-D24/D56 Quick Start Guide ICP DAS CO., LTD.
7
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [email protected]
PIO-D24U/D56U and PEX-D24/D56 Series Card Product Page:
http://www.icpdas.com/root/product/solutions/pc_based_io_board/pci/pio-d24_56.html
DN-37 and CA-3710 page (optional):
http://www.icpdas.com/products/DAQ/screw_terminal/dn_37.htm
http://www.icpdas.com/products/Accessories/cable/cable_selection.htm
Documentation:
CD:\NAPDOS\PCI\PIO-DIO\Manual\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pio-dio/manual/
Software:
CD:\NAPDOS\PCI\UniDAQ\DLL\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/
Related Information