ICP DAS USA PIO-D64U User manual

Technical support: servic[email protected] P1
PIO-D64U/PEX-D64
Quick Start
v1.2, Oct. 2019
What’s in the box?
Related Information
The package includes the following items:
PIO-D64U/PEX-D64 x1
Quick Start x 1
(This Document)
For more detailed information related to the user manual and
software for UniDAQ Driver & SDK:
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/
For more detailed information related to the hardware settings for
PIO-D64 Series Card:
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pio-dio/manual/
CA-2002 Product Page (optional):
http://www.icpdas.com/products/Accessories/cable/cable_selection.htm

Technical support: servic[email protected] P2
1 Installing Windows Driver
1) Download or locate the Windows driver.

The UniDAQ driver supports 32-/64-bit Windows
XP/2003/2008/7/8/10. It is recommended that new users install this
driver, which can be found in the
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
PIO-DIO Series Classic Driver supports Windows 98/NT/2K and
32-bit Windows XP/2003/2008/7. it is recommended this driver is
installed by customers who have previously installed a PIO-D64 series
card and are regular users. For more details, refer to:
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pio-dio/manual/quicks
tart/classic/
2) Click the “Next>” button to start the installation.
3) Check your DAQ Card is or not on supported list, then click the
“Next>” button.
4) Select the installed folder, the default path is C:\ICPDAS\UniDAQ,
confirm and click the “Next>” button.
5) Check your DAQ Card on list, then click the “Next>” button.
6) Click the “Next>” button on the Select Additional Tasks window.
7) Click the “Next>” button on the Download Information window.
8) Select “No, I will restart my computer later” and then click the
“Finish” button.
NOTE:
For more detailed information related to driver installation, refer to
Chapter 2 “Starting” in the UniDAQ SDK user manual.

Technical support: servic[email protected] P3
2 Installing Hardware on PC
1) Power off the Computer.
2) Remove all covers from the Computer.
3) Select an unused PCI /PCI Express slot.
4) Carefully insert the Card into PCI/PCI
Express slot.
5) Replace the Computer Covers.
6) Power on the Computer.
7) The operating system will automatically detect the new hardware and
install the necessary drivers after reboot the PC.
8) Open the “Device Manager” to verify that the PIO-D64 Series Card
has been correctly installed and is in the Device Manager, as illustrated
on below.
[UniDAQ]PIO-D64 Series Digital I/O Board

Technical support: servic[email protected] P4
3 Pin Assignments
NOTES:
1. CLKn: External clock source for Counter n
2. GATEn: External gate control signal for Counter n
3. OUTn: Output of Timer/Counter n
4. All signals are TTL compatible

Technical support: servic[email protected] P5
4 Testing Board
Prepare for device
CA-2002 (optional) cable
1) Connect the CON1 to CON2 on board using the CA-2002 cable.
2) Launch the UniDAQ Utility software.
If the UniDAQ Utility was installed in the default folder, it will be located
at “C:\ICPDAS\UniDAQ\Driver”.
Double-click
CA-2002 Cable

Technical support: servic[email protected] P6
3) Confirm that the PIO-D64 Series Card
has been successfully installed in the
Host system.
NOTE: The device numbers start
from 0.
4) Click the “TEST”button to start the test.
5) Check the results of the Digital Input and Digital Output functions
test.
Click the “Digital Output” tab.
Select “Port0”from the “Port Number” drop-down options.
Click the DO channels 0, 2, 4 and 6 buttons.



PIO-D64

Technical support: servic[email protected] P7
Click the “Digital Input” tab.
Select “Port0” from the “Port Number” drop-down options.
The DI indicators will turn black when the corresponding DO
channels 0, 2, 4 and 6 are ON.


