ICRealtime ICR300H3B User manual

IR OFF:<80mA IR NO:<400mA
PRECAUTIONS
D E S C R I P T I O N PARTS INSTRUCTION
FEATURES
DIMENSIONS (Unit: mm)
Color Waterproof IR Dome Camera
Operating Instruction
420 TV Line
Ultrafio Advanced Image Processing Technology; 700TVL High Resolution
700 TV Line
ICR300H3B
The camera adopts SONY newest generation image processing technology-Ultrafio.
It has high horizontal resolution up to 700TVL as well as advanced 2D-DNR, D-WDR,
HLC ,IR-CUT and other functions. Fashionable and professional appearance design; IP66
waterproof. Powerful OSD menu includes Brightness, Contrast, Saturation adjusting
functions; Multi-area, White Balance, AGC , and other functions ensure clear bright
pictures. Besides, Mirror, Privacy and other aided functions make it suitable for various
special environments and realize simple and convenient round-clock surveillance.
Thank you for your purchasing this product. Before attempting to connect or operate this
product, please read these instructions carefully and save this manual for future use.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
Use special algorithm, reduce video and color noises, which increases its resolution
and cleanliness and creates clearer and sharper images.
2D-DNR
SPECIFICATIONS
Model No
Sensor
Video Format
Sync Mode
Resolution
S/N Ratio
Mini Illumination
AGC
White Bal
BLC
Mirror
Iris Control
Shutter Speed
Voltage
Current
Operating Temp
Storage Temp
Dimension
Weight
Mode
Range
1/3 High Sensitivity CCD" 960H
PAL/NTSC
INTERNAL
700TVL
0Lux(IR ON)
AUTO; MANUAL
ON; OFF; HLC
ON/OFF
Electronic Iris/Auto Iris Lens (DC Drive)
Auto;120FLK;1/60(1/50)-1/100000 Second
DC12V
>50dB (AGC OFF)
MANUAL;ATW; USER
(ATW) 2200~10000°K
ICR300H3B
-10℃~50℃
-20℃~50℃
Day/Night
AUTO; COLOR; B&W;EX-CDS
Sensor
Privacy
ON/OFF(1-8 AREAS)
Adjustment
HIGH LUMINANCE; LOW LUMINANCE
Title
ON/OFF (15 Characters Max)
Menu Oper
Power
2D-DNR
D-WDR
OFF; HIGH; MID; LOW
OFF; HIGH; MID; LOW
*Specifications subject to change without notice.
Lens
IR Range
D-WDR
Advanced D-WDR technology greatly improves its image quality under variable
lighting conditions.
HS BLC
Long-life IR LEDS Design
It can distinguish strong strong light spots, and cover them to improve the definition
of the entire image and thus ensures clearer and more effective surveillance.
High-performance IR LED,whose brightness is
several times higher and service life longer than
an ordinary LED's with 30m IR range.
700TVL horizontal resolution with 1/3" sony 960H CCD.
High Resolution
COLOR mode in daytime when there is enough light and B/W mode at night when
the illumination is low and IR turned on automatically.
Auto D/N Swithover Operating Mode
Up to 8 areas can be masked to protect personal privacy by concealing parts of the
image from view.
Privacy Masking
Powerful OSD menu allows for various function settings.
Waterproof, Dust Prevention Design
OSD Menu(optional)
IP-66 Waterproof
1.
is DC12V.
2.
3.
5.
6.
7.
Use the Appropriate Power Supply
The input power for the camera Be sure to connect it to the appropriate
power. Wrong connection may cause malfunction and/or damage to the video
camera.
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user
serviceable parts inside. Ask a qualified service person for servicing.
Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage.
4. Do note use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove. Use
a mild detergent and wipe gently.
Clean the CCD faceplate with care.
When cleaning the CCD panel, do not use strong or abrasive detergents. Use a piece
of lens tissue or cotton tipped applicator and ethanol.
Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely bright objects that
causes mear to appear irrespective of whether the camera is operating or not. This can
damage the CCD (Charge Coupled Device).
Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communication device
which emits strong electromagnetic field, some irregularity such as noise on monitor
screen may happen.
2.8-12mm
30m
1000g
Camera Installation
1. Subpanel
2. Base
3. Dome Body
4. Video Line
5. Power Line
6. Zoom
7. Focus
8. Base Screw Hole
1. Please use the allen wrench in the accessory bag to loose the fixed screws in the subpanel.
2. Seperate the base from the subpanel.
3. Fix the base to the position you need with screws.
4. Then put the dome body and subpanelin place and tighten the screws.
5. Adjust Lens focal length.
6
8
12345
7
OSD Menu Setup
Menu button for choice
Move up and down by up and down button
Move horizontally or modify parameter
by left and right button
ENTER:
:
:
OSD Menu Control
80（H)*120(Φ)mm

EN-X6-515P-120723
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by UP and DOWN buttons and set lens by left and right buttons:ELC ( manual
iris lens); DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF. Move the cursor to SHARPNESS, and set
SHARPNESS range. Move the cursor to MONITOR, and set MODE type. Move to cursor
GAMMA, and set GAMMA range. Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
2D-DNR
EXIT
LENS
MID
HIGH
ELC
OFF
RETURN
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO
033
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
ALL DAY
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC;
set BLC by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.
Set HBLC by left and right buttons: ALL DAY; ON. When HBLC is ON, you can set SET LEVEL,
GRAY MODE and MASK SEL. Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL
010
RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
ATW
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
060
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
EX-CDS
DAY>NIGHT
DWELL TIME
BURST
040
130
NIGHT>DAY
OFF
RETURN
001
SMART IR
AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
017
LSC
OFF
EXIT
RETURN
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF. When
MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
025
SENSITI.
OFF
DISPLAY
RETURN
HOLD TIME
ALARM
EXIT
OFF
ON
005
PRIVACY:
PRIVACY
MASK 2
MASK 1
3 MASK
OFF
4 MASK
RETURN
5 MASK
6 MASK
7 MASK
8 MASK
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:
1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set TITLE
by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
OFF
OFF AUTO DPC
OFF
OLPF
RETURN
OSD COLOR
EXIT
850
BLUE
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
050
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons. Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and
BAUDRATE. Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
RETURN
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:
1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit. Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON. When
MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 2D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons: CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons:
0.45；0.6；1；other.
RETURN
MODE2
MONITOR
GAMMA
0.45
RETURN
USER TITLE
CLR POS RET
A B CDE FG H I JK L M N OP
QR
S TUVW XYZ 01 2 345
678 9 ! # $%&( ) *+
,./< >?@[ ] ^_
=\
_
LEVEL
RETURN
001
SMART IR-AUTO
GAMMA-USER
LEVEL 0.20
RETURN
LSC
LEVEL 0.10
RETURN
MOT-AREA
AREA 1
AREA 2
AREA 3
AREA 4
RETURN
ON
ON
ON
ON
MASK1
DOT SEL L-TOP
DOT XY
MOVE XY
COLOR SET CRAY
RETURN
MANUAL DPC-MANUAL
LEVEL
RETURN
050