FCC Radio Frequency Interference Statement Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
CE Statement
We, Icron Technologies Corporation, declare under our sole responsibility that the USB 2.0 Ranger® 2324/2344, to which this declaration relates, is
in conformity with European Standard EN 55022,EN 61000 and EN 55024.
IC Statement
This Class B digital apparatus complies with Canadian ICES-003.
WEEE Statement
The European Union has established regulations for the collection and recycling of all waste electrical and electronic equipment (WEEE).
Implementation of WEEE regulations may vary slightly by individual EU member states. Please check with your local and state government
guidelines for safe disposal and recycling or contact your national WEEE recycling agency for more information.
Product Operation and Storage
Please read and follow all instructions provided with this product, and operate for intended use only. Do not attempt to open the product casing
as this may cause damage and will void warranty. Use only the power supply provided with this product.When not in use, product should be
stored in a dry location between -20°C and 70°C.
Limited Hardware Warranty
Icron Technologies Corporation warrants that any hardware products accompanying this documentation shall be free from significant defects
in material and workmanship for a period of two years from the date of purchase. Icron Technologies Corporation’s hardware warranty extends
to Licensee, its customers and end users.The warranty does not include repair of failures caused by: misuse, neglect, accident, modification,
operation outside a normal operating environment, service of the device by non-authorized servicers or a product for which Icron is not
responsible.
Hardware Remedies
Icron Technologies Corporation’s entire liability and the Licensee’s exclusive remedy for any breach of warranty, shall be, at Icron Technologies
Corporation’s option, either: (a) return of the price paid, or (b) repair or replacement of hardware, which will be warranted for the remainder
of the original warranty period or 30 days, whichever is longer. These remedies are void if failure of the hardware has resulted from accident,
abuse or misapplication.
Limitation of Liability
The hardware warranty set forth in this agreement replaces all other warranties. Icron Technologies Corporation expressly disclaims all other
merchantability and fitness for a particular purpose and non-infringement of third-party rights with respect to the hardware.
Icron Technologies Corporation dealer, agent, or employee is not authorized to make any modification, extension, or addition to this warranty.
Under no circumstances will Icron Technologies Corporation, its suppliers or licensors be liable for any costs of procurement or substitute
products or services, lost profits, loss of information or data, or any other special, indirect, consequential or incidental damages arising in any way
out of the sale of, use of, or inability to use Icron Technologies Corporation product or service, even if Icron Technologies Corporation, its suppliers
or licensors have been advised of the possibility of such damages. In no case shall Icron Technologies Corporation, its suppliers and licensors’
liability exceed the actual money paid for the products at issue.
Since some jurisdictions do not allow the limitation of implied warranties of liability for incidental, consequential, special or indirect damages, the
above limitation may not always apply. The above limitations will not apply in case of personal injury where and to the extent that
applicable law requires such liability.
Certification, Compliance and Warranty Information
©2017 Icron Technologies Corporation. All rights reserved. Icron Technologies Corporation, the Icron Technologies Corporation logo, and the Icron Technologies Corporation products referred to herein are either the
trademarks or the registered trademarks of Icron Technologies Corporation. All other trademarks are property of their respective owners. Icron Technologies Corporation assumes no responsibility for errors that may
appear in this document. Information contained herein is subject to change without notice. 90-01533-A03
Obtaining Warranty Service
To obtain warranty service, you must contact Icron Technologies Corporation within the warranty period for a Return Material Authorization
(RMA) number. Icron Technologies Corporation will not accept returns without an authorized RMA number. Be sure to include the serial numbers
of the LEX unit and REX unit in any of your email correspondence. Package the product appropriately for safe shipment and mark the RMA
number on the outside of the package.The package must be sent prepaid to Icron Technologies Corporation.We recommend that you insure
it or send it by a method that provides for tracking of the package.The repaired or replaced item will be shipped to you, at Icron Technologies
Corporation’s expense, not later than thirty days after Icron Technologies Corporation receives the defective product.
Address to return product: Icron Technologies Corporation
Att: RMA Coordinator
4664 Lougheed Highway, Suite 221
Burnaby, BC V5C 5T5 Canada
Warranty/RMA Inquiries: icron.com/support icron.com
