Icron USB 2.0 RG2304 Operating and maintenance instructions

USB 2.0 RG2304
4-Port USB 2.0 100m CAT 5e/6/7
Extender System
Quick
Start
Guide
12
34
Before you get started, ensure that all the drivers required for your USB device(s) are installed.
Connect the Remote Extender to the
AC adapter and plug it into a power
source.
Connect the Local Extender to the
computer using the included USB
cable.
Attach USB device(s) to the Remote
Extender.
1Place extenders where desired and connect
the CAT 5e/6/7 extension link cabling to the
Link ports (RJ45) on the Local and Remote
Extenders.
Host
Activity
Link
Power
Remote Extender (front view)
Max 100m (CAT 5e/6/7 cable not included)
Local Extender (back view)
Local Extender (back view)
LinkMode
Config
LinkMode
24V 1A Config
Computer
Link
Mode
Config
Link
Mode
24V 1A Config
Remote Extender (back view)
Remote Extender (back view)
Package Contents:
• USB 2.0 RG2304 Local Extender
• USB 2.0 RG2304 Remote Extender
• USB 2.0 Cable
• AC Power Adapter
• Country Specific Power Cord
• Quick Start Guide

FCC Radio Frequency Interference Statement Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
CE Statement
We, Icron Technologies Corporation, declare under our sole responsibility that the USB 2.0 RG2304, to which this declaration relates, is in
conformity with European Standard EN 55022,EN 61000 and EN 55024.
IC Statement
This Class B digital apparatus complies with Canadian ICES-003.
WEEE Statement
The European Union has established regulations for the collection and recycling of all waste electrical and electronic equipment (WEEE).
Implementation of WEEE regulations may vary slightly by individual EU member states. Please check with your local and state government
guidelines for safe disposal and recycling or contact your national WEEE recycling agency for more information.
Product Operation and Storage
Please read and follow all instructions provided with this product, and operate for intended use only. Do not attempt to open the product casing
as this may cause damage and will void warranty. Use only the power supply provided with this product.When not in use, product should be
stored in a dry location between -20°C and 70°C.
Certification and Compliance
Icron Technologies Corporation
4664 Lougheed Hwy.
Suite 221
Burnaby, BC,
V5C 5T5, Canada
[phone]
Information contained herein is subject to
change without notice. 90-01096-B03