Icron USB Ranger 2211 User manual

USB Ranger® 2211
Extends USB 2.0 over Cat 5 with Flexible Power
100 m (330 ft)
User Guide

Thank you for purchasing the USB Ranger® 2211.
Please read this guide thoroughly.
This document applies to, but is not limited to Part Numbers: 00-00315, 00-00316, 00-00317, and 00-00318.
FCC Radio Frequency Interference Statement Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received
including interference that may cause undesired operation.
CE Statement
We, Icron Technologies Corporation, declare under our sole responsibility that the USB Ranger® 2211, to
which this declaration relates, is in conformity with European Standard EN 55022 Class A, EN 61000 and
EN 55024.
IC Statement
This Class A digital apparatus complies with Canadian ICES-003.
©2012 Icron Technologies Corporation. All rights reserved. Icron Technologies Corporation, the Icron
Technologies Corporation logo, and the Icron Technologies Corporation products referred to herein are
either the trademarks or the registered trademarks of Icron Technologies Corporation. All other trademarks
are property of their respective owners. Icron Technologies Corporation assumes no responsibility for errors
that may appear in this manual. Information contained herein is subject to change without notice.
Document #90-00944-A02

Contents
Introduction........................................................................................................................ 3
USB Ranger® 2211 Product Contents........................................................................................................................................ 3
Requirements.................................................................................................................................................................................... 3
About the USB Ranger® 2211....................................................................................................................................................... 3
Local Extender Description .......................................................................................................................................................... 4
Remote Extender Description..................................................................................................................................................... 5
Installation Guide ............................................................................................................... 6
Mounting the Local Extender or Remote Extender............................................................................................................. 6
Preparing for Installation............................................................................................................................................................... 6
Installing the Local Extender ....................................................................................................................................................... 7
Installing the Remote Extender .................................................................................................................................................. 7
Installing Flexible Power ............................................................................................................................................................... 7
Connecting the Local Extender to the Remote Extender.................................................................................................. 7
Checking the Installation .............................................................................................................................................................. 8
Connecting a USB Device ............................................................................................................................................................. 8
Compatibility..................................................................................................................................................................................... 8
Troubleshooting ................................................................................................................. 9
Specifications...................................................................................................................... 11
Limited Hardware Warranty .............................................................................................. 12
Hardware Remedies .......................................................................................................... 12
Limitation of Liability ........................................................................................................ 12
Obtaining Warranty Service .............................................................................................. 13
Contacting Technical Support ........................................................................................... 13
Technical Glossary .............................................................................................................. 14

Introduction
The instructions in this guide assume a general knowledge of computer installation procedures, familiarity
with cabling requirements, and some understanding of USB devices.
Notes provide additional information that could be useful.
Caution symbols are followed by very important information about an operational requirement.
USB Ranger® 2211 Product Contents
Your USB Ranger® 2211 is packaged with:
• Local Extender (LEX)
• Remote Extender (REX)
• AC Power Adapter (1)
• USB 2.0 Cable (6 ft)
• Quick Start Guide and Warranty Information
The USB Ranger® 2211 is a unique extender providing the option to apply power at the local or remote extender. The
supplied 24V, 1A power adapter can be connected to either the local or remote extender for normal operation. This
option gives added flexibility/convenience for installers who can carry one product for multiple customers.
NEVER power BOTH the local extender and remote extender as the units may be damaged.
Requirements
To complete the installation, you will also require the following items that are not included with the product:
• USB 1.1 or 2.0 compatible computer (host computer) with a USB compliant operating system
• USB 1.1 or 2.0 compatible device
• Cat 5 Unshielded Twisted Pair (UTP) cable with two RJ45 connectors (if using surface cabling),
OR, Cat 5 cabling with two information outlets and two Cat 5 patch cords with RJ45 connectors
(if using premise cabling)
All references to Cat 5 cable in this document represent the minimum requirement of solid core Cat 5e unshielded twisted
pair cable. Category 6 or better or STP cable may be substituted.
About the USB Ranger® 2211
The USB Ranger® 2211 incorporates Icron’s patented technology, enabling users to extend beyond the
standard 5m cable limit for USB peripheral devices. With the USB Ranger® 2211, USB device(s) can be located
up to 100 meters (330 feet) from the computer.
The USB Ranger® 2211 is composed of two individual units: the local extender and remote extender.
The local and remote extenders may be hot to the touch when operating at or near the high end of
the certified temperature range.
note
note
note
3

Local Extender Description
The local extender connects to the computer using a standard USB cable (included). Power for the local
extender is provided by the Host PC. Power for the remote extender is provided by the 24V AC adapter
connected at either the local or the remote extender.The local extender delivers power over the Cat 5
extension link to the remote extender when the included power supply is connected to the local extender.
ITEM TYPE DESCRIPTION
1 Link LED (Green) Indicates both the local and remote extenders have power and the
Cat 5 cable is connected properly.
2 Power Port
The Power Port gives the option to connect power to either the
local extender or the remote extender. Connect the supplied 24V,
1A power adapter to either the local extender or remote extender.
3 Link Port (RJ45) Accepts RJ45 connector for Cat 5 cabling (or better).
4 USB Type B connector Used to connect the local extender unit to the host computer.
4
Top View Left Side
Right Side
4
23
1

Remote Extender Description
The remote extender provides a USB Type A port for connecting standard USB devices.The remote extender
allows you to connect one USB device directly. Additional devices may be connected by attaching USB hubs
to the remote extender.The remote extender is powered either directly by the included power supply, or
via the Cat 5 link extension cable from the local extender.The USB port delivers 500mA of current to the
attached USB device.
ITEM TYPE DESCRIPTION
1 Link LED (Green) Indicates both the local and remote extenders have power and the
Cat 5 cable is connected properly.
2 Power Port
The Power Port gives the option to connect power to either the
local extender or the remote extender. Connect the supplied 24V,
1A power adapter to either the local extender or remote extender.
3 Link Port (RJ45) Accepts RJ45 connector for Cat 5 cabling (or better).
4 Device Port (USB Type A) Accepts a USB device.
5
Top View Left Side
Right Side
23
4
1

Installation Guide
Mounting the Local Extender or Remote Extender
If mounting is required, the local and remote extenders have two mounting slots on each side for use with
tie/zip wraps (not included).
Preparing for Installation
Before you can install the USB Ranger® 2211, you need to prepare your site:
1. Determine where the computer is to be located and set up the computer.
2. Determine where you want to locate the USB device(s).
3. If you are using surface cabling, the USB Ranger® 2211 supports a maximum distance of 100m.
OR
If you are using premise cabling, ensure Cat 5 cabling is installed between the two locations, with
Cat 5 information outlets located near both the computer and the USB device(s), and the total length,
including patch cords is no more than 100m.
6
Connect power adapter to either the local or remote extender.
USB 2.0 over 100m
Cat 5 cabling (or better)
mounting slot

Installing the Local Extender
1. Place the local extender near the computer.
2. Install the supplied USB cable between the local extender and USB port on the host computer.
Installing the Remote Extender
1. Place the remote extender near the USB device(s) in the desired remote location.
Installing Flexible Power
1. Connect 24V, 1A supplied AC power adapter to the local or remote extender, based on installation
requirement.
Use only the AC adapter supplied with the USB Ranger® 2211. Use of substitute adapters may cause permanent
damage to the system and will void the warrantly.
NEVER plug a power adapter to BOTH local and remote extenders, as this may cause permanent damage to the
system and will void the warranty.
Connecting the Local Extender to the Remote Extender
To ensure proper operation, it is recommended that only solid core Cat 5e or better, Unshielded Twisted Pair (UTP) cabling
be used to connect the LEX to the REX.The cabling must have a straight-through conductor configuration with no
crossovers and must be terminated with 8 conductor RJ45 connectors at both ends.The combined length of any patch
cords using stranded conductors must not exceed 10m.
With Surface Cabling
1. Plug one end of the Cat 5 cabling (not included) into the Link port (RJ45) on the local extender.
2. Plug the other end of the Cat 5 cabling into the Link port (RJ45) on the remote extender.
With Premise Cabling
1. Plug one end of a Cat 5 patch cord (not included) into the Link port (RJ45) on the local extender.
2. Plug the other end of the patch cord into the Cat 5 information outlet near the host computer.
3. Plug one end of the 2nd Cat 5 patch cord (not included) into the Link port (RJ45) on the remote
extender.
4. Plug the other end of the 2nd patch cord into the Cat 5 information outlet near the USB device.
note
7

Checking the Installation
1. Check that the green Link LED is illuminated on the local and remote extender.
2. For Windows users (2000, XP, Vista, 7), open Device Manager to confirm that the USB Ranger® 2211 has
installed correctly. Expand the entry for Universal Serial Bus controllers. If the USB Ranger® 2211 has
been installed correctly, you should find it listed as a “Generic USB Hub”.
3. For Mac OS X users, open the System Profiler to confirm that the USB Ranger® 2211 has installed
correctly. In the left hand column under Hardware, select “USB” and inspect the right hand panel. If
the USB Ranger® 2211 has been installed correctly, you should find it listed as a “Hub” under the USB
High-Speed Bus/USB Bus.
4. If the USB Ranger® 2211 is not detected correctly or fails to detect, please consult the Troubleshooting
Guide.
To open System Profiler in OS X: Open the Finder, select Applications, then open the Utilities folder and double click on
the System Profiler icon.
To open Device Manager in Windows 2000 or XP: Right click“My Computer”then select: Properties >> Hardware tab >>
Device Manager.
To open Device Manager in Windows Vista or Windows 7:
Open the Start menu, right click on“Computer” then select: Manage >> Device Manager.
Connecting a USB Device
1. Install any software required to operate the USB device(s). Refer to the documentation for the USB
device(s), as required.
2. Connect the USB device to the device port on the remote extender.
3. Check that the device is detected and installed properly in the operating system.
Compatibility
The USB Ranger® 2211 complies with USB 1.1 and USB 2.0 specifications governing the design of USB
devices. However, Icron Technologies Corporation does not guarantee that all USB devices are compatible
with the USB Ranger® 2211, as there are a number of different factors that may impact the operation of USB
devices over extended distances.
8
note

9
Troubleshooting
The following table provides troubleshooting tips.The topics are arranged in the order in which they should
be executed in most situations. If you are unable to resolve the problem after following these instructions,
please contact technical support for further assistance.
PROBLEM CAUSE SOLUTION
USB device is
attached but
not functioning.
• The USB device requires drivers
that were not installed.
• The USB device does not
support USB hubs.
• The USB device has
malfunctioned.
1. Install the required USB device driver on the
computer operating system prior to attaching
the USB device into the remote extender. Please
see your USB device manufacturer’s website for
details.
2. In the Universal Serial Bus controllers section
of Device Manager, check that the USB device is
enumerated.
3. Contact Technical Support for assistance.
USB device is
attached but
not functioning.
• Overcurrent condition has
occured because the USB
device has drawn more current
than can be supplied per
USB specification (500mA).
Operating systems may
generate a status bubble
indicating an issue.
1. Power cycle remote extender: Unplug the power
adapter from the extender, wait approximatly
30 seconds, plug the power adapter into the
extender.
2. If overcurrent continues to occur, either:
(a) the USB device may use more power than the
USB specification, or (b) the USB device may be
damaged.
3. Consult your USB device documentation and
power your USB device with the required power
supply.
Link LED
on the local
and remote
extenders blink
intermittently.
• The Cat 5 cable connecting
the local extender and remote
extender is faulty.
• Firmware mismatch between
the local and remote extenders
1. Ensure the Cat 5 cabling is of decent quality.
2. Use a different local and remote extender pair
which have the same firmware revision.
3. Upgrade the local and remote extender
firmware; contact Technical Support for
assistance.