IDTECH SmartPIN K100 3.X Product manual

SmartPIN K100 3.X
Technical Reference Manual
80114510-001-D
July 3, 2019
International Technologies & Systems Corporation
10721 Walker Street, Cypress, CA 90630-4720; Tel: [phone]; Fax: [phone]
www.idtechproducts.com

Copyright © 2019, International Technologies & Systems Corp. All rights reserved.
Page 2 of 24
Revision History
Rev.
Date
Description of Changes
By
A
4/19/2016
Release to Revision A
JH
A
6/8/2016
New engineering drawings. Miscellaneous edits.
Include USB VID & PID.
Expanded explanation of Get Numeric Entry.
KT
A
6/17/2016
Include tamper-protection info (Sections 3.10, 6.4,
6.5).
KT
B
6/22/2016
11/30/2016
Added USB descriptor info.
Removed "sleep mode."
KT
C
2/8/2017
2/14/2017
Add 75 46 28 (Get All Key) command.
Update 78 46 25 (Get Key Status) command.
KT
D
7/3/2019
Added SRED Decommissioning text
CB

Copyright © 2019, International Technologies & Systems Corp. All rights reserved.
Page 3 of 24
ID TECH
10721 Walker Street, Cypress, CA90630 Voice: [phone] Fax: [phone]
Copyright 2017 by ID Technologies, Inc. All rights reserved.
The information contained herein is provided to the user as a convenience. While every effort has been made
to ensure accuracy, ID TECH is not responsible for damages that might occur because of errors or omissions,
including any loss of profit or other commercial damage, nor for any infringements or patents or other rights
of third parties that may result from this information’s use. The specifications described herein were current at
the time of publication, but are subject to change at any time without prior notice.
LIMITED WARRANTY
ID TECH warrants to the original purchaser for a period of 12 months from the date of invoice that this
product is in good working order and free from defects in material and workmanship under normal use and
service. ID TECH’s obligation under this warranty is limited to, at its option, replacing, repairing, or giving
credit for any product that returned to the factory of origin with the warranty period and with transportation
charges and insurance prepaid, and which is, after examination, disclosed to ID TECH’s satisfaction to be
defective. The expense of removal and reinstallation of any item or items of equipment is not included in this
warranty. No person, firm, or corporation is authorized to assume for ID TECH any other liabilities in
connection with the sales of any product. In no event shall ID TECH be liable for any special, incidental or
consequential damages to purchaser or any third party caused by any defective item of equipment, whether
that defect is warranted against or not. Purchaser’s sole and exclusive remedy for defective equipment, which
does not conform to the requirements of sales, is to have such equipment replaced or repaired by ID TECH.
For limited warranty service during the warranty period, please contact ID TECH to obtain a Return Material
Authorization (RMA) number & instructions for returning the product.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR PARTICULAR PURPOSE. THERE ARE NO OTHER WARRANTIES OR GUARANTEES,
EXPRESS OR IMPLIED, OTHER THAN THOSE HEREIN STATED. THIS PRODUCT IS SOLD AS IS.
IN NO EVENT SHALL ID TECH BE LIABLE FOR CLAIMS BASED UPON BREACH OF EXPRESS OR
IMPLIED WARRANTY OF NEGLIGENCE OF ANY OTHER DAMAGES WHETHER DIRECT,
IMMEDIATE, FORESEEABLE, CONSEQUENTIAL OR SPECIAL OR FOR ANY EXPENSE
INCURRED BY REASON OF THE USE OR MISUSE, SALE OR FABRICATIONS OF PRODUCTS
WHICH DO NOT CONFORM TO THE TERMS AND CONDITIONS OF THE CONTRACT.
ID TECH and Value through Innovation are trademarks of International Technologies & Systems
Corporation. USB (Universal Serial Bus) specification is copyright by Compaq Computer Corporation, Intel
Corporation, Microsoft Corporation, and NEC Corporation. Windows is a registered trademark of Microsoft
Corporation.

Copyright © 2019, International Technologies & Systems Corp. All rights reserved.
Page 4 of 24
Table of Contents
1.0 INTRODUCTION ...................................................................................................................................................6
2.0 FEATURES ............................................................................................................................................................6
3.0 PHYSICAL SPECIFICATION.....................................................................................................................................7
3.1 PHYSICAL SPECIFICATION................................................................................................................................................................................ 7
3.2 OPERATING ENVIRONMENT ........................................................................................................................................................................... 7
3.3 ELECTRICAL...................................................................................................................................................................................................... 8
3.4 OUTPUT CONNECTIONS ................................................................................................................................................................................. 8
3.5 AUDIO FEEDBACK ........................................................................................................................................................................................... 8
3.6 BATTERY.......................................................................................................................................................................................................... 8
3.7 OPERATION LED .........................................................................................................................................................9
3.8 RELIABILITY...................................................................................................................................................................................................... 9
3.9 PERIPHERAL DEVICE PAIRING......................................................................................................................................................................... 9
3.10 TAMPER PROTECTION FEATURES............................................................................................................................................................. 9
4.0 USB DESCRIPTORS .............................................................................................................................................10
4.1 USB DESCRIPTOR INFO ................................................................................................................................................................................10
4.1.1 Device Descriptor ........................................................................................................................................10
4.1.2 Configuration Descriptor.............................................................................................................................10
4.1.3 Interface Descriptor ....................................................................................................................................11
4.1.4 HID Descriptor.............................................................................................................................................11
4.1.5 End Point 1 Descriptor.................................................................................................................................11
4.1.6 End Point 2 Descriptor.................................................................................................................................11
4.1.7 Report Descriptor........................................................................................................................................12
5.0 COMMAND / RESPONSE COMMUNICATIONS ....................................................................................................12
6.0 PIN PAD TASK COMMANDS ...............................................................................................................................12
6.1 GET ENCRYPTED PIN .................................................................................................................................................12
6.2 GET NUMERIC ENTRY ................................................................................................................................................................................... 13
6.3 GET FUNCTION KEY ......................................................................................................................................................................................14
6.4 GET ALL KEY .................................................................................................................................................................................................14
6.5 CANCEL COMMAND......................................................................................................................................................................................14
6.6 BEEPER CONTROL .........................................................................................................................................................................................14
6.7 GET MODEL NUMBER ..................................................................................................................................................................................15
6.8 GET KEY STATUS...........................................................................................................................................................................................15
6.9 GET REAL TIME............................................................................................................................................................................................. 16
6.10 GET ALL FIX/REMOVAL RECORDS .......................................................................................................................................................... 16
6.11 SET PIN LENGTH.....................................................................................................................................................................................16
6.12 GET PIN LENGTH....................................................................................................................................................................................16
7.0 GENERAL TASK COMMANDS.............................................................................................................................. 17
7.1 RESTART COMMAND....................................................................................................................................................................................17
7.2 GET FIRMWARE VERSION.............................................................................................................................................................................17
7.3 ENTER INTO BOOTLOADER ........................................................................................................................................................................... 17
7.4 ACTIVATE FIX DEVICE (VIA PASSWORD) .........................................................................................................................17
7.5 ACTIVATE REMOVAL OF DEVICE (LEGALLY, VIA PASSWORD)...............................................................................................18
8.0 RS232 TASK COMMANDS...................................................................................................................................20

Copyright © 2019, International Technologies & Systems Corp. All rights reserved.
Page 5 of 24
8.1 NOTE .............................................................................................................................................................................................................20
8.2 SET BAUDRATE .............................................................................................................................................................................................20
8.3 GET BAUDRATE ............................................................................................................................................................................................20
8.4 SET PARITY....................................................................................................................................................................................................20
8.5 GET PARITY ...................................................................................................................................................................................................20
8.6 SET STOPBITS ...............................................................................................................................................................................................20
8.7 GET STOPBITS............................................................................................................................................................................................... 21
9.0 ERROR CODES .................................................................................................................................................... 22
NOTES........................................................................................................................................................................23