IEI Technology KINO-9454 User manual

KINO-9454 Mini-ITX SBC
Page 1
IEI Technology Corp.
User Manual
MODEL:
KINO-9454
Mini-ITX Motherboard with Intel
®
Core™2 Duo/
Pentium® 4/Pentium® D 1066/800/533 MHz CPU
Dual PCIe GbE, SATA 3Gb/s, USB 2.0 and Audio
Rev. 2.10 – 16 December, 2010

KINO-9454 Mini-ITX SBC
Page 2
Revision
Date Version Changes
2010-12 v.2.10 Updated for R21 version (deleted Mini PCI slot)
2008-04 v.2.01 Enhanced description of the COM port information
2007-11 v2.00 1. Added Intel® CoreTM 2 Duo as one of the compatible processors
2. Added following functions
- Support TPM (Trusted Platform Module)
- Support ASF 2.0 specifications
- Support AT/ATX power
- Support PCIe x16 SDVO graphics card
2006-09 v1.00 Initial Release

KINO-9454 Mini-ITX SBC
Page 3
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.

KINO-9454 Mini-ITX SBC
Page 4
Manual Conventions
WARNING!
Warnings appear where overlooked details may cause damage to the equipment or result
in personal injury. Warnings should be taken seriously. Warnings are easy to recognize.
The word “warning” is written as “WARNING,” both capitalized and bold and is followed by
text. The text is the warning message. A warning message is shown below:
WARNING:
This is an example of a warning message. Failure to adhere to warning
messages may result in permanent damage to the KINO-9454 or
personal injury to the user. Please take warning messages seriously.
CAUTION!
Cautionary messages should also be heeded to help reduce the chance of losing data or
damaging the KINO-9454. Cautions are easy to recognize. The word “caution” is written
as “CAUTION,” both capitalized and bold and is followed. The italicized text is the
cautionary message. A caution message is shown below:

KINO-9454 Mini-ITX SBC
Page 5
CAUTION:
This is an example of a caution message. Failure to adhere to cautions
messages may result in permanent damage to the KINO-9454. Please
take caution messages seriously.
NOTE:
These messages inform the reader of essential but non-critical information. These
messages should be read carefully as any directions or instructions contained therein can
help avoid making mistakes. Notes are easy to recognize. The word “note” is written as
“NOTE,” both capitalized and bold and is followed by text. The text is the cautionary
message. A note message is shown below:
NOTE:
This is an example of a note message. Notes should always be read.
Notes contain critical information about the KINO-9454. Please take
note messages seriously.

KINO-9454 Mini-ITX SBC
Page 6
Packing List
NOTE:
If any of the components listed in the checklist below are missing,
please do not proceed with the installation. Contact the IEI reseller or
vendor you purchased the KINO-9454 from or contact an IEI sales
representative directly. To contact an IEI sales representative, please
send an email to [email protected].
The items listed below should all be included in the KINO-9454 package.
1 x KINO-9454 SBC
1 x IDE cable
2 x SATA cables
1 x SATA power cable
1 x I/O Shielding
1 x Mini jumper Pack
1 x Quick Installation Guide
1 x Utility CD
Images of the above items are shown in Chapter 3.

KINO-9454 Mini-ITX SBC
Page 7
Table of Contents
1INTRODUCTION................................................................................................... 19
1.1 KINO-9454 OVERVIEW ........................................................................................... 20
1.1.1 KINO-9454 Applications.................................................................................. 20
1.1.2 KINO-9454 Benefits......................................................................................... 21
1.1.3 KINO-9454 Features........................................................................................ 21
1.2 KINO-9454 BOARD OVERVIEW............................................................................... 22
1.2.1 KINO-9454 Connectors................................................................................... 22
1.2.2 Technical Specifications................................................................................... 23
2DETAILED SPECIFICATIONS ........................................................................... 25
2.1 OVERVIEW................................................................................................................ 26
2.2 DIMENSIONS............................................................................................................. 26
2.2.1 Board Dimensions............................................................................................ 26
2.2.2 External Interface Panel Dimensions.............................................................. 27
2.3 DATA FLOW.............................................................................................................. 27
2.4 CPU SUPPORT.......................................................................................................... 28
2.5 INTEL®945G GRAPHICS AND MEMORY CONTROLLER HUB ..................................... 29
2.5.1 Intel®945G Overview...................................................................................... 29
2.5.2 Intel®945G Memory Support .......................................................................... 29
2.5.3 Intel®945G PCIe x16 ...................................................................................... 30
2.5.3.1 PCIe x16 Bus Overview............................................................................ 30
2.5.3.2 PCIe x16 Bus Specifications..................................................................... 31
2.5.4 Intel®945G Integrated Graphics Media Accelerator 950............................... 31
2.6 INTEL®ICH7 I/O CONTROLLER HUB ....................................................................... 32
2.6.1 Intel®ICH7 Overview...................................................................................... 32
2.6.2 Intel®ICH7 Audio Codec ’97 Controller......................................................... 33
2.6.3 Intel®ICH7 PCIe Bus: PCIe GbE Ethernet Controller................................... 33
2.6.4 Intel®ICH7 IDE Interface............................................................................... 34
2.6.5 Intel®ICH7 Low Pin Count (LPC) Interface................................................... 35
2.6.6 Intel®ICH7 Real Time Clock........................................................................... 35
2.6.7 Intel®ICH7 SATA Controller........................................................................... 35

KINO-9454 Mini-ITX SBC
Page 8
2.6.8 Intel®ICH7 USB Controller............................................................................ 35
2.7 PCIE BUS COMPONENTS .......................................................................................... 36
2.7.1 PCIe Bus Overview.......................................................................................... 36
2.7.2 PCIe x16 Expansion......................................................................................... 36
2.7.3 Broadcom PCI Express GbE interface............................................................. 36
2.8 LPC BUS COMPONENTS ........................................................................................... 37
2.8.1 LPC Bus Overview........................................................................................... 37
2.8.2 BIOS Chipset.................................................................................................... 37
2.8.3 Super I/O chipset.............................................................................................. 37
2.8.3.1 Super I/O LPC Interface ........................................................................... 38
2.8.3.2 Super I/O 16C550 UARTs ........................................................................ 38
2.8.3.3 Super I/O Enhanced Hardware Monitor................................................... 38
2.8.3.4 Super I/O Fan Speed Controller................................................................ 39
2.8.3.5 Super I/O Keyboard Controller................................................................. 39
2.8.4 Fintek F81216DG LPC Serial Port Chipset.................................................... 39
2.9 ENVIRONMENTALAND POWER SPECIFICATIONS ....................................................... 39
2.9.1 System Monitoring ........................................................................................... 39
2.9.2 Operating Temperature and Temperature Control........................................... 40
2.9.3 Power Consumption......................................................................................... 41
3UNPACKING.......................................................................................................... 42
3.1ANTI-STATIC PRECAUTIONS...................................................................................... 43
3.2 UNPACKING.............................................................................................................. 43
3.2.1 Unpacking Precautions.................................................................................... 43
3.3 UNPACKING CHECKLIST........................................................................................... 44
3.3.1 Package Contents............................................................................................. 44
3.3.2 Optional Items.................................................................................................. 45
4CONNECTORS AND JUMPERS......................................................................... 47
4.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 48
4.1.1 KINO-9454 Layout........................................................................................... 48
4.1.2 Peripheral Interface Connectors ..................................................................... 49
4.1.3 Rear Panel Connectors.................................................................................... 50
4.2 INTERNAL PERIPHERAL CONNECTORS...................................................................... 50
4.2.1 ATX + CPU 12V Power Connector................................................................. 50

KINO-9454 Mini-ITX SBC
Page 9
4.2.2 Fan Connectors................................................................................................ 51
4.2.3 Front Panel Connector .................................................................................... 53
4.2.4 Digital Input/Output Connector....................................................................... 54
4.2.5 IDE Connector................................................................................................. 55
4.2.6 IR Interface Connector .................................................................................... 57
4.2.7 PCI Express x16 Slot........................................................................................ 58
4.2.8 ATX Power Connector ..................................................................................... 60
4.2.9 Serial Port Connector...................................................................................... 61
4.2.10 SATA Drive Connectors ................................................................................. 62
4.2.11 TPM Connector.............................................................................................. 63
4.2.12 Internal USB Connectors............................................................................... 65
4.3 EXTERNAL INTERFACE CONNECTORS ....................................................................... 66
4.3.1 Audio Connectors............................................................................................. 66
4.3.2 CRT Connector ................................................................................................ 67
4.3.3 Ethernet Connectors ........................................................................................ 68
4.3.4 Keyboard/Mouse Connector ............................................................................ 69
4.3.5 Serial Port Connectors .................................................................................... 70
4.3.6 USB Connectors............................................................................................... 71
5INSTALLATION .................................................................................................... 73
5.1ANTI-STATIC PRECAUTIONS...................................................................................... 74
5.2 INSTALLATION CONSIDERATIONS.............................................................................. 75
5.2.1 Installation Notices.......................................................................................... 75
5.2.2 Installation Checklist....................................................................................... 76
5.3 UNPACKING.............................................................................................................. 77
5.3.1 Unpacking Precautions.................................................................................... 77
5.3.2 Unpacking Checklist........................................................................................ 77
5.4 CPU, CPU COOLING KIT AND DIMM INSTALLATION .............................................. 78
5.4.1 Socket LGA775 CPU Installation.................................................................... 78
5.4.2 Socket LGA775 CF-520 Cooling Kit Installation............................................ 82
5.4.3 DIMM Installation........................................................................................... 84
5.5 JUMPER SETTINGS .................................................................................................... 85
5.5.1 Clear CMOS Jumper........................................................................................ 86
5.5.2 COM 3 Function Select Jumper....................................................................... 87
5.6 CHASSIS INSTALLATION............................................................................................ 88

KINO-9454 Mini-ITX SBC
Page 10
5.6.1 Airflow.............................................................................................................. 88
5.6.2 Motherboard Installation................................................................................. 89
5.7 INTERNAL PERIPHERAL DEVICE CONNECTIONS........................................................ 89
5.7.1 Peripheral Device Cables................................................................................ 89
5.7.2 ATA Flat Cable Connection ............................................................................. 89
5.7.3 PCIe x16 Expansion Card Installation............................................................ 90
5.7.4 SATA Drive Connection ................................................................................... 91
5.8 EXTERNAL PERIPHERAL INTERFACE CONNECTION ................................................... 93
5.8.1 Audio Connection............................................................................................. 94
5.8.2 LAN Connection............................................................................................... 94
5.8.3 PS/2 Keyboard and Mouse Connection........................................................... 95
5.8.4 Serial Device Connection ................................................................................ 96
5.8.5 USB Connection............................................................................................... 97
5.8.6 VGA Monitor Connection ................................................................................ 98
6AMI BIOS SETUP................................................................................................ 100
6.1 INTRODUCTION....................................................................................................... 101
6.1.1 Starting Setup................................................................................................. 101
6.1.2 Using Setup.................................................................................................... 101
6.1.3 Getting Help................................................................................................... 102
6.1.4 Unable to Reboot after Configuration Changes............................................ 102
6.1.5 BIOS Menu Bar.............................................................................................. 102
6.2 MAIN...................................................................................................................... 102
6.3ADVANCED............................................................................................................. 104
6.3.1 CPU Configuration........................................................................................ 105
6.3.2 IDE Configuration......................................................................................... 106
6.3.2.1 IDE Master, IDE Slave ........................................................................... 108
6.3.3 Super IO Configuration ..................................................................................113
6.3.4 Hardware Health Configuration.....................................................................117
6.3.5 ACPI Configuration........................................................................................119
6.3.6 APM Configuration........................................................................................ 120
6.3.7 Remote Access Configuration........................................................................ 122
6.3.8 Trusted Computing......................................................................................... 126
6.3.9 USB Configuration......................................................................................... 127
6.3.9.1 USB Mass Storage Device Configuration............................................... 129

KINO-9454 Mini-ITX SBC
Page 11
6.4 PCI/PNP................................................................................................................. 132
6.5 BOOT...................................................................................................................... 134
6.5.1 Boot Settings Configuration........................................................................... 135
6.5.2 Boot Device Priority...................................................................................... 138
6.5.3 Hard Disk Drives........................................................................................... 139
6.6 SECURITY............................................................................................................... 140
6.7 CHIPSET ................................................................................................................. 142
6.7.1 NorthBridge Configuration............................................................................ 143
6.7.2 Southbridge Configuration ............................................................................ 144
6.8 EXIT....................................................................................................................... 146
7SOFTWARE DRIVERS....................................................................................... 148
7.1AVAILABLE SOFTWARE DRIVERS ............................................................................ 149
7.2 CHIPSET DRIVER INSTALLATION............................................................................. 149
7.3 VGADRIVER ......................................................................................................... 152
7.4 BROADCOM LAN DRIVER (FOR GBELAN) INSTALLATION ................................... 156
7.5 REALTEK AUDIO DRIVER (ALC655) INSTALLATION.............................................. 161
7.6 INTEL®MATRIX STORAGE MANAGER INSTALLATION............................................. 164
ABIOS CONFIGURATION OPTIONS ............................................................. 167
A.1 BIOS CONFIGURATION OPTIONS........................................................................... 168
BDIO INTERFACE................................................................................................. 171
B.1 DIO INTERFACE INTRODUCTION............................................................................ 172
B.2 DIO CONNECTOR PINOUTS.................................................................................... 172
B.3ASSEMBLY LANGUAGE SAMPLES........................................................................... 173
B.3.1 Enable the DIO Input Function..................................................................... 173
B.3.2 Enable the DIO Output Function.................................................................. 173
CWATCHDOG TIMER .......................................................................................... 174
DCOMPATIBILITY................................................................................................ 177
D.1 COMPATIBLE OPERATING SYSTEMS ....................................................................... 178
D.2 COMPATIBLE PROCESSORS..................................................................................... 178
D.3 COMPATIBLE MEMORY MODULES ......................................................................... 178
EHAZARDOUS MATERIALS DISCLOSURE................................................... 180

KINO-9454 Mini-ITX SBC
Page 12
E.1 HAZARDOUS MATERIAL DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ..................................... 181
FEXTERNALAC’97 AUDIO CODEC................................................................. 184
F.1 INTRODUCTION....................................................................................................... 185
F.1.1 Accessing the AC’97 CODEC........................................................................ 185
F.1.2 Driver Installation.......................................................................................... 185
F.2 SOUND EFFECT CONFIGURATION............................................................................ 186
F.2.1 Accessing the Sound Effects Manager ........................................................... 186
F.2.2 Sound Effect Manager Configuration Options .............................................. 187

KINO-9454 Mini-ITX SBC
Page 13
List of Figures
Figure 1-1: KINO-9454 Mini-ITX SBC.........................................................................20
Figure 1-2: KINO-9454 Board Overview....................................................................22
Figure 2-1: KINO-9454 Dimensions (mm) .................................................................26
Figure 2-2: External Interface Panel Dimensions (mm)...........................................27
Figure 2-3: Data Flow Block Diagram........................................................................28
Figure 2-4: 240-pin DIMM Sockets.............................................................................30
Figure 2-5: PCIe x16 Socket.......................................................................................30
Figure 2-6: PCIe GbE Connectors .............................................................................34
Figure 2-7: Onboard USB Implementation................................................................36
Figure 4-1: Connector and Jumper Locations .........................................................48
Figure 4-2: CPU 12V Power Connector Location.....................................................51
Figure 4-3: Fan Connector Locations .......................................................................52
Figure 4-4: Front Panel Connector Location............................................................53
Figure 4-5: Digital I/O Connector Location...............................................................54
Figure 4-6: IDE Device Connector Location.............................................................56
Figure 4-7: IR Connector Location............................................................................57
Figure 4-8: PCI Express x16 Slot Location...............................................................58
Figure 4-9: Power Connector Location.....................................................................60
Figure 4-10: Serial Port Connector Location............................................................62
Figure 4-11: SATA Drive Connector Locations........................................................63
Figure 4-12: TPM Connector Location......................................................................64
Figure 4-13: Internal USB Connector Locations......................................................65
Figure 4-14: KINO-9454 External Interface Connectors..........................................66
Figure 4-15: Audio Connector....................................................................................67
Figure 4-16: VGA Connector......................................................................................67
Figure 4-17: RJ-45 Ethernet Connector ....................................................................69
Figure 4-18: PS/2 Pinouts...........................................................................................70
Figure 4-19: External Serial Port Connector ............................................................71

KINO-9454 Mini-ITX SBC
Page 14
Figure 5-1: Intel® LGA775 Socket .............................................................................79
Figure 5-2: Remove the CPU Socket Protective Shield...........................................80
Figure 5-3: Open the CPU Socket Load Plate...........................................................80
Figure 5-4: Insert the Socket LGA775 CPU...............................................................81
Figure 5-5: IEI CF-520 Cooling Kit.............................................................................82
Figure 5-6: Securing the Heat sink to the PCB Board.............................................83
Figure 5-7: Installing a DIMM .....................................................................................84
Figure 5-8: Jumper Locations....................................................................................85
Figure 5-9: Clear CMOS Jumper................................................................................87
Figure 5-10: COM 3 Function Select Jumper Location ...........................................88
Figure 5-11: IDE Cable Connection...........................................................................90
Figure 5-12: PCIe x16 Installation..............................................................................91
Figure 5-13: SATA Drive Cable Connection .............................................................92
Figure 5-14: SATA Power Drive Connection ............................................................93
Figure 5-15: Audio Connectors..................................................................................94
Figure 5-16: LAN Connection.....................................................................................95
Figure 5-17: PS/2 Keyboard/Mouse Connector........................................................96
Figure 5-18: Serial Device Connector .......................................................................97
Figure 5-19: USB Connector ......................................................................................98
Figure 5-20: VGA Connector......................................................................................99
Figure 7-1: InstallShield Wizard Preparation Screen............................................ 150
Figure 7-2: Welcome Screen................................................................................... 150
Figure 7-3: License Agreement............................................................................... 151
Figure 7-4: Readme Information............................................................................. 151
Figure 7-5: Restart the Computer........................................................................... 152
Figure 7-6: Starting Install Shield Wizard Screen................................................. 153
Figure 7-7: Preparing Setup Screen....................................................................... 153
Figure 7-8: VGA Driver Installation Welcome Screen........................................... 154
Figure 7-9: VGA Driver License Agreement .......................................................... 154
Figure 7-10: VGA Driver Installing Notice.............................................................. 155
Figure 7-11: VGA Driver Installation Complete..................................................... 155
Figure 7-12: Access Windows Control Panel........................................................ 156

KINO-9454 Mini-ITX SBC
Page 15
Figure 7-13: Double Click the System Icon ........................................................... 157
Figure 7-14: Double Click the Device Manager Tab.............................................. 157
Figure 7-15: Device Manager List........................................................................... 158
Figure 7-16: Search for Suitable Driver.................................................................. 159
Figure 7-17: Locate Driver Files.............................................................................. 160
Figure 7-18: Location Browsing Window............................................................... 160
Figure 7-19: InstallShield Wizard Extracting Files................................................ 161
Figure 7-20: Audio Driver Install Shield Wizard Starting ..................................... 162
Figure 7-21: Audio Driver Setup Preparation........................................................ 162
Figure 7-22: Audio Driver Digital Signal ................................................................ 163
Figure 7-23: Audio Driver Installation Continues ................................................. 163
Figure 7-24: Audio Driver Installation Complete................................................... 164
Figure 7-25: Preparing Setup Screen..................................................................... 165

KINO-9454 Mini-ITX SBC
Page 16
List of Tables
Table 1-1: Technical Specifications ..........................................................................24
Table-2-1: Supported CPUs........................................................................................29
Table 2-2: Supported HDD Specifications................................................................34
Table 2-3: Power Consumption .................................................................................41
Table 3-1: Package List Contents..............................................................................45
Table 3-2: Optional Items............................................................................................46
Table 4-1: Peripheral Interface Connectors..............................................................50
Table 4-2: Rear Panel Connectors.............................................................................50
Table 4-3: CPU 12V Power Connector Pinouts ........................................................51
Table 4-4: CPU Fan Connector Pinouts....................................................................52
Table 4-5: System Fan Connector Pinouts...............................................................52
Table 4-6: Front Panel Connector Pinouts ...............................................................54
Table 4-7: Digital I/O Connector Pinouts ..................................................................55
Table 4-8: IDE Connector Pinouts.............................................................................57
Table 4-9: IR Connector Pinouts................................................................................58
Table 4-10: PCIe x16 Side A Pinouts.........................................................................59
Table 4-11: PCIe x16 Side B Pinouts.........................................................................60
Table 4-12: Power Connector Pinouts ......................................................................61
Table 4-13: Serial Port Connector Pinouts...............................................................62
Table 4-14: SATA Drive Connector Pinouts .............................................................63
Table 4-15: TPM Connector Pinouts..........................................................................64
Table 4-16: USB1 and USB2 Pinouts.........................................................................65
Table 4-17: VGA Connector Pinouts .........................................................................68
Table 4-18: LAN1 and LAN2 Pinouts.........................................................................69
Table 4-19: RJ-45 Ethernet Connector LEDs............................................................69
Table 4-20: PS/2 Connector Pinouts .........................................................................70
Table 4-21: External Serial Port Pinouts...................................................................71
Table 4-22: External USB Connector Pinouts ..........................................................72

KINO-9454 Mini-ITX SBC
Page 17
Table 5-1: Jumpers......................................................................................................85
Table 5-2: Clear CMOS Jumper Settings ..................................................................86
Table 5-3: COM 3 Function Select Jumper Settings................................................87
Table 5-4: IEI Provided Cables...................................................................................89
Table 6-1: BIOS Navigation Keys............................................................................ 102

KINO-9454 Mini-ITX SBC
Page 18
List of BIOS Menus
BIOS Menu 1: Main................................................................................................... 103
BIOS Menu 2: Advanced.......................................................................................... 105
BIOS Menu 3: CPU Configuration........................................................................... 106
Menu 4: IDE Configuration ...................................................................................... 107
Menu 5: IDE Master and IDE Slave Configuration ................................................ 109
Menu 6: Super IO Configuration............................................................................. 113
Menu 7: Hardware Health Configuration................................................................ 117
Menu 8: ACPI Configuration ................................................................................... 119
Menu 9:Advanced Power Management Configuration......................................... 120
Menu 10: Remote Access Configuration [Advanced] .......................................... 123
Menu 11: Trusted Computing.................................................................................. 127
Menu 12: USB Configuration .................................................................................. 128
Menu 13: USB Mass Storage Device Configuration.............................................. 130
Menu 14: PCI/PnP Configuration............................................................................ 132
Menu 15: Boot........................................................................................................... 135
Menu 16: Boot Settings Configuration................................................................... 136
Menu 17: Boot Device Priority Settings................................................................. 138
Menu 18: Hard Disk Drives...................................................................................... 140
Menu 19: Security..................................................................................................... 141
Menu 20: Chipset...................................................................................................... 142
Menu 21:Northbridge Chipset Configuration........................................................ 143
Menu 22:Southbridge Chipset Configuration........................................................ 145
Menu 23:Exit ............................................................................................................. 146

KINO-9454 Mini-ITX SBC
Page 19
1 Introduction
Chapter
1

KINO-9454 Mini-ITX SBC
Page 20
1.1 KINO-9454 Overview
Figure 1-1: KINO-9454 Mini-ITX SBC
The KINO-9454 Mini-ITX form factor motherboard is a LGA775 Intel®Core 2 Duo,
Pentium D, Pentium 4 or Celeron D CPU platform. The KINO-9454 has a maximum front
side bus (FSB) frequency of 1066MHz and comes with a VGA interface and dual PCI
Express (PCIe) Gigabit Ethernet (GbE). The KINO-9454 supports up to four,
second-generation serial ATA (SATA) hard disk drives (HDD) with maximum transfer
rates of 3Gbps and up to eight USB 2.0 devices. The KINO-9454 also has a PCIe x16
socket for system expansion. The Trusted Platform Module (TPM) support provides
protection to the system enabling system integrators and designers to build a secured and
valued system.
1.1.1 KINO-9454 Applications
The KINO-9454 is designed for applications in the following areas:
Industrial and hard environment PC applications
Human Machine Interface (HMI) applications
Communication and network monitoring applications
Marine, GPS and transportation applications