IEI Technology ISP-9652/9602 User manual

ISP-9652/9602 User Manual
Page i
IEI Technology Corp.
User Manual
MODEL:
ISP-9652/9602
MicroATX Socket P Motherboard for Intel® Core™2 Duo
/
Celeron® M CPU, VGA, Four PCIe GbE LAN with dual-group
bypass function, Two PCIe GbE LAN, SATA 3.0 Gb/s, USB 2.0
and CompactFlash®, RoHS Compliant
Rev. 1.00 – 12 February, 2010
MODEL:
ISP-9652/9602
Rev. 1.00 – 12 February, 2010

ISP-9652/9602 User Manual
Page ii
Revision
Date Version Changes
12 February, 2010 1.00 Initial release

ISP-9652/9602 User Manual
Page iii
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.

ISP-9652/9602 User Manual
Page iv
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 INTRODUCTION........................................................................................................... 2
1.2 CONNECTORS ............................................................................................................. 3
1.3 DIMENSIONS............................................................................................................... 4
1.4 DATA FLOW................................................................................................................ 5
1.5 TECHNICAL SPECIFICATIONS ...................................................................................... 6
2 UNPACKING................................................................................................................. 8
2.1ANTI-STATIC PRECAUTIONS........................................................................................ 9
2.2 UNPACKING PRECAUTIONS......................................................................................... 9
2.3 PACKING LIST............................................................................................................. 9
2.3.1 Optional Items.................................................................................................. 10
3 CONNECTORS ........................................................................................................... 12
3.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 13
3.1.1 ISP-9652/9602 Layout..................................................................................... 13
3.1.2 Peripheral Interface Connectors ..................................................................... 13
3.1.3 External Interface Panel Connectors............................................................... 14
3.2 INTERNAL PERIPHERAL CONNECTORS...................................................................... 14
3.2.1 12V Power Connector...................................................................................... 14
3.2.2 ATX Power Connector ..................................................................................... 15
3.2.3 CompactFlash® Slot........................................................................................ 16
3.2.4 Fan Connectors................................................................................................ 18
3.2.5 Front Panel Connector .................................................................................... 19
3.2.6 LAN LED Connector........................................................................................ 20
3.2.7 PCI Slot............................................................................................................ 21
3.2.8 SATA Drive Connectors ................................................................................... 24
3.2.9 Serial Port Connector...................................................................................... 25
3.2.10 EC SPI Flash Connector................................................................................ 25
3.2.11 USB Connectors............................................................................................. 26
3.2.12 VGA Connector.............................................................................................. 27

ISP-9652/9602 User Manual
Page v
3.3 EXTERNAL PERIPHERAL INTERFACE CONNECTOR PANEL ......................................... 28
3.3.1 LAN Connectors............................................................................................... 28
3.3.2 USB Connectors............................................................................................... 29
4 INSTALLATION ......................................................................................................... 31
4.1ANTI-STATIC PRECAUTIONS...................................................................................... 32
4.2 INSTALLATION CONSIDERATIONS.............................................................................. 32
4.2.1 Installation Notices.......................................................................................... 33
4.2.2 Installation Checklist....................................................................................... 34
4.3 UNPACKING.............................................................................................................. 34
4.4 CPU, CPU COOLING KIT AND DIMM INSTALLATION .............................................. 35
4.4.1 Socket P CPU Installation ............................................................................... 35
4.4.2 Socket P Cooling Kit Installation..................................................................... 37
4.4.3 DIMM Installation........................................................................................... 38
4.5 JUMPER SETTINGS .................................................................................................... 40
4.5.1 Clear CMOS Jumper........................................................................................ 40
4.5.2 Embedded Controller Function Settings.......................................................... 41
4.5.2.1 SMBUS Slave Address (SMB_ID)........................................................... 42
4.5.2.2 HW MCU Enable...................................................................................... 42
4.5.2.3 ACK Count................................................................................................ 43
4.5.2.4 Bypass Function........................................................................................ 43
4.6 CHASSIS INSTALLATION............................................................................................ 45
4.6.1 Airflow.............................................................................................................. 45
4.6.2 Motherboard Installation................................................................................. 45
4.7 INTERNAL PERIPHERAL DEVICE CONNECTIONS........................................................ 45
4.7.1 12V CPU Power Connection ........................................................................... 46
4.7.2 SATA Drive Connection ................................................................................... 47
4.7.3 Single RS-232 Cable (w/o Bracket) ................................................................. 48
4.7.4 USB Cable (Four Port).................................................................................... 50
4.7.5 VGA Monitor Connection ................................................................................ 51
4.8 EXTERNAL PERIPHERAL INTERFACE CONNECTION ................................................... 52
4.8.1 LAN Connection............................................................................................... 52
4.8.2 USB Connection (Dual Connector)................................................................. 53
4.9 SOFTWARE INSTALLATION ........................................................................................ 54
5 BIOS SCREENS........................................................................................................... 56

ISP-9652/9602 User Manual
Page vi
5.1 INTRODUCTION......................................................................................................... 57
5.1.1 Starting Setup................................................................................................... 57
5.1.2 Using Setup...................................................................................................... 57
5.1.3 Getting Help..................................................................................................... 58
5.1.4 Unable to Reboot After Configuration Changes.............................................. 58
5.1.5 BIOS Menu Bar................................................................................................ 58
5.2 MAIN........................................................................................................................ 58
5.3ADVANCED............................................................................................................... 60
5.3.1 CPU Configuration.......................................................................................... 61
5.3.2 IDE Configuration........................................................................................... 62
5.3.2.1 IDE Master, IDE Slave ............................................................................. 63
5.3.3 Super IO Configuration ................................................................................... 68
5.3.4 Hardware Health Configuration...................................................................... 70
5.3.5 Remote Access Configuration.......................................................................... 73
5.3.6 USB Configuration........................................................................................... 75
5.3.7 Power Configuration ....................................................................................... 77
5.4 PCI/PNP................................................................................................................... 80
5.5 BOOT........................................................................................................................ 82
5.5.1 Boot Settings Configuration............................................................................. 82
5.6 SECURITY................................................................................................................. 84
5.7 CHIPSET ................................................................................................................... 85
5.7.1 Northbridge Configuration.............................................................................. 86
5.7.2 Southbridge Configuration .............................................................................. 88
5.8 EXIT......................................................................................................................... 89
A BIOS OPTIONS .......................................................................................................... 91
B TERMINOLOGY........................................................................................................ 94
C WATCHDOG TIMER .................................................................................................. 4
D COMPATIBILITY........................................................................................................ 7
D.1 COMPATIBLE OPERATING SYSTEMS ........................................................................... 8
D.2 COMPATIBLE PROCESSORS......................................................................................... 8
D.3 COMPATIBLE MEMORY MODULES ............................................................................. 9
E HAZARDOUS MATERIALS DISCLOSURE ......................................................... 10

ISP-9652/9602 User Manual
Page vii
E.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ........................................11

ISP-9652/9602 User Manual
Page viii
List of Figures
Figure 1-1: ISP-9652/9602 ..............................................................................................................2
Figure 1-2: Connectors ..................................................................................................................3
Figure 1-3: ISP-9652/9602 Dimensions (mm)...............................................................................5
Figure 1-4: Data Flow Block Diagram...........................................................................................5
Figure 3-1: Connector and Jumper Locations...........................................................................13
Figure 3-2: CPU 12V Power Connector Location......................................................................15
Figure 3-3: ATX Power Connector Pinout Locations................................................................16
Figure 3-4: CompactFlash® Slot Location.................................................................................17
Figure 3-5: +12V Fan Connector Locations...............................................................................18
Figure 3-6: Front Panel Connector Location .............................................................................19
Figure 3-7: LAN LED Connector Location .................................................................................20
Figure 3-8: PCI Slot Location ......................................................................................................21
Figure 3-9: SATA Drive Connector Locations ...........................................................................24
Figure 3-10: Serial Port Connector Location.............................................................................25
Figure 3-11: SPI Flash Connector Locations.............................................................................26
Figure 3-12: USB Connector Pinout Locations.........................................................................27
Figure 3-13: VGA Connector .......................................................................................................27
Figure 3-14: ISP-9652/9602 External Peripheral Interface Connector.....................................28
Figure 3-15: RJ-45 Ethernet Connector......................................................................................29
Figure 3-16: RJ-45 Ethernet Connector......................................................................................30
Figure 4-1: Make sure the CPU socket retention screw is unlocked ......................................36
Figure 4-2: Lock the CPU Socket Retention Screw...................................................................37
Figure 4-3: Cooling Kit Support Bracket....................................................................................38
Figure 4-4: DIMM Installation.......................................................................................................39
Figure 4-5: Clear CMOS Jumper .................................................................................................41
Figure 4-6: LAN Bypass Mode Behavior....................................................................................44
Figure 4-7: Embedded Controller Function Settings Jumper..................................................45
Figure 4-8: Power Cable to Motherboard 12V CPU Power Connection ..................................46
Figure 4-9: Connect Power Cable to Power Supply..................................................................47
Figure 4-10: SATA Drive Cable Connection...............................................................................48

ISP-9652/9602 User Manual
Page ix
Figure 4-11: Single RS-232 Cable Installation ...........................................................................49
Figure 4-12: SATA Power Drive Connection..............................................................................49
Figure 4-13: Four Port USB Cable Connection..........................................................................50
Figure 4-14: VGA Connector .......................................................................................................51
Figure 4-15: LAN Connection......................................................................................................53
Figure 4-16: USB Connector........................................................................................................54
Figure 4-17: Introduction Screen................................................................................................55
Figure 4-18: Available Drivers.....................................................................................................55

ISP-9652/9602 User Manual
Page x
List of Tables
Table 1-1: Technical Specifications..............................................................................................7
Table 3-1: Peripheral Interface Connectors...............................................................................14
Table 3-2: Rear Panel Connectors..............................................................................................14
Table 3-3: CPU 12V Power Connector Pinouts..........................................................................15
Table 3-4: ATX Power Connector Pinouts .................................................................................16
Table 3-5: CompactFlash® Slot Pinouts....................................................................................18
Table 3-6: +12V Fan Connector Pinouts.....................................................................................19
Table 3-7: Front Panel Connector Pinouts.................................................................................20
Table 3-8: LAN LED Connector Pinouts.....................................................................................21
Table 3-9: PCI Slot........................................................................................................................23
Table 3-10: SATA Drive Connector Pinouts...............................................................................24
Table 3-11: Serial Port Connector Pinouts ................................................................................25
Table 3-12: SPI Flash Connector Pinouts ..................................................................................26
Table 3-13: USB Port Connector Pinouts...................................................................................27
Table 3-14: VGA Connector Pinouts...........................................................................................28
Table 3-15: LAN Pinouts ..............................................................................................................29
Table 3-16: RJ-45 Ethernet Connector LEDs.............................................................................29
Table 3-17: USB Port Connector Pinouts...................................................................................30
Table 4-1: Jumpers.......................................................................................................................40
Table 4-2: Clear CMOS Jumper Settings....................................................................................41
Table 4-3: SMBUS Slave Address Jumper Settings..................................................................42
Table 4-4: HW MCU Enable Jumper Settings ............................................................................42
Table 4-5: SMBUS Slave Address Jumper Settings..................................................................43
Table 4-6: HW MCU Enable Jumper Settings ............................................................................44
Table 5-1: BIOS Navigation Keys................................................................................................58

ISP-9652/9602 User Manual
Page xi
BIOS Menus
BIOS Menu 1: Main.......................................................................................................................59
BIOS Menu 2: Advanced..............................................................................................................61
BIOS Menu 3: CPU Configuration...............................................................................................61
BIOS Menu 4: IDE Configuration.................................................................................................62
BIOS Menu 5: IDE Master and IDE Slave Configuration...........................................................64
BIOS Menu 6: Super IO Configuration........................................................................................68
BIOS Menu 7: Hardware Health Configuration..........................................................................70
BIOS Menu 8: Remote Access Configuration............................................................................73
BIOS Menu 9: USB Configuration...............................................................................................76
BIOS Menu 10: APM Configuration.............................................................................................78
BIOS Menu 11: PCI/PnP Configuration.......................................................................................80
BIOS Menu 12: Boot.....................................................................................................................82
BIOS Menu 13: Boot Settings Configuration.............................................................................83
BIOS Menu 14: Security...............................................................................................................85
BIOS Menu 15: Chipset................................................................................................................86
BIOS Menu 16:Northbridge Chipset Configuration...................................................................87
BIOS Menu 17:Southbridge Chipset Configuration..................................................................89
BIOS Menu 18:Exit........................................................................................................................90

ISP-9652/9602 User Manual
Page xii

ISP-9652/9602 User Manual
Page 1
Chapter
1
1 Introduction

ISP-9652/9602 User Manual
Page 2
1.1 Introduction
Figure 1-1: ISP-9652/9602
The ISP-9652/9602 MicroATX motherboard is a Socket P Intel® Core™2 Duo and Intel®
Celeron® M processor platform. 45nm core and 65nm core processors are supported.
Up to two 2.0 GB 667/533 MHz are supported by the Intel® GME965 graphics memory
controller hub (GMCH) on the ISP-9652, while the Intel® GML960 on the ISP-9602
supports two 1.0 GB 533 MHz DDR2 SDRAM DIMMs. Both included an onboard VGA
output.
The integrated Intel® ICH8M I/O controller hub (ICH) supports three SATA 3Gb/s drives
with data transfer speeds of 3.0 Gbps. Ten USB 2.0 channels and one expansion PCI
socket provide flexible expansion options. The ISP-9652 also provides PCIe x16
expansion through an edge connector.
The ISP-9652/9602 features four GbE LAN connections with two dual-group LAN bypass
function. In the event of a failure the hardware LAN bypass will be activated to ensure
essential network communications will continue. Two additional GbE LAN ports without
LAN bypass are included.

ISP-9652/9602 User Manual
Page 3
1.2 Connectors
The connectors on the ISP-9652/9602 are shown in the figure below.
Figure 1-2: Connectors

ISP-9652/9602 User Manual
Page 4
1.3 Dimensions
The dimensions of the board are listed below:
Length: 220 mm
Width: 244 mm

ISP-9652/9602 User Manual
Page 5
Figure 1-3: ISP-9652/9602 Dimensions (mm)
1.4 Data Flow
4Figure 1-4 shows the data flow between the two on-board chipsets and other components
installed on the motherboard and described in the following sections of this chapter.
Figure 1-4: Data Flow Block Diagram

ISP-9652/9602 User Manual
Page 6
1.5 Technical Specifications
ISP-9652/9602 technical specifications are listed in table below.
Specification ISP-9652/9602 ISP-9602
Form Factor MicroATX
Socket Socket P
CPU Supported Socket P Intel® Core™2 Duo processor
Socket P Intel® Celeron® M processor
Front Side Bus
(FSB)
800/533 MHz 533 MHz
Northbridge
Chipset
Intel® GME965 Intel® GLE960
Southbridge
Chipset
Intel® ICH8M
Memory Two 240-pin DIMM sockets support two
667/533 MHz DDR2 SDRAM DIMM
(system max. 4 GB)
Two 240-pin DIMM sockets
support two 533 MHz DDR2
SDRAM DIMM (system max. 2
GB)
Super I/O iTE IT8718F
Embedded
Controller
iTE IT8512E
LAN Six Intel® PCIe GbE 82574L controllers
BIOS AMI BIOS
Watchdog
Timer
Software programmable supports 1~255 sec. system reset
Expansion
PCI One PCI slot
PCIe One PCIe x16 via edge connector (ISP-9652 only)
I/O Interface Connectors

ISP-9652/9602 User Manual
Page 7
Specification ISP-9652/9602 ISP-9602
Display One VGA port
Ethernet Six RJ-45 GbE ports
Serial Ports One RS-232 Serial Port
One RS-232 via internal box header
USB 2.0/1.1
ports
Two USB ports
Eight USB via internal pin headers
Storage
CompactFlash® One CompactFlash® Type II slot
Serial ATA Three independent Serial ATA (SATA) channels with 3.0 Gb/s
data transfer rates
Environmental and Power Specifications
Power Supply ATX power
Power
Consumption
5V @ 12.9 A, 12V @ 0.14A, 12V_Core @ 12.69A, 3.3V @ 0.47A
(Intel® Core™2 Duo T7500 2.2GHz with two DDR2 800MHz 2GB DRAM)
Operating
temperature
0ºC ~ 60ºC (requires cooler and silicone heat sink paste)
Storage
temperature
-40ºC ~ 85ºC
Humidity 0% ~ 95% (non-condensing)
Physical Specifications
Dimensions 244 mm x 220 mm
Weight GW/NW 1000 g/450 g
Table 1-1: Technical Specifications

ISP-9652/9602 User Manual
Page 8
Chapter
2
2 Unpacking