IEI Technology KINO-LX User manual

Page 1
KINO-LX Motherboard
Page 1
KINO-LX Motherboard

KINO-LX Motherboard
REVISION HISTORY
Title KINO-LX Motherboard
Revision Number Description Date of Issue
1.0 Initial release November 2006
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event is the manufacturer liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
Product names mentioned herein are used for identification purposes only and may be
trademarks and/or registered trademarks of their respective owners.
Page 2
IEI®Technology, Corp.

KINO-LX Motherboard
Table of Contents
1INTRODUCTION................................................................................................... 15
1.1 KINO-LX MOTHERBOARD OVERVIEW.................................................................... 16
1.1.1 KINO-LX Applications..................................................................................... 16
1.1.2 KINO-LX Benefits ............................................................................................ 16
1.1.3 KINO-LX Features........................................................................................... 16
1.2 KINO-LX OVERVIEW.............................................................................................. 17
1.2.1 KINO-LX Connectors....................................................................................... 17
1.2.2 Technical Specifications................................................................................... 19
2DETAILED SPECIFICATIONS ........................................................................... 21
2.1 CPU SUPPORT.......................................................................................................... 22
2.2 SYSTEM CHIPSET ..................................................................................................... 22
2.2.1 Data Flow ........................................................................................................ 24
2.3 GRAPHICS SUPPORT ................................................................................................. 25
2.4 MEMORY SUPPORT ................................................................................................... 26
2.5 SUPER I/O ................................................................................................................ 26
2.6 ETHERNET CONTROLLER ......................................................................................... 29
2.7 DRIVE INTERFACES .................................................................................................. 30
2.7.1 SATA Drive Interface ....................................................................................... 30
2.7.2 IDE HDD Interface.......................................................................................... 31
2.7.3 Floppy Disk Drive (FDD) Interface ................................................................ 31
2.8 SERIAL PORTS .......................................................................................................... 31
2.9 AUDIO CODEC .......................................................................................................... 31
2.10 REAL TIME CLOCK................................................................................................. 33
2.11 SYSTEM MONITORING ............................................................................................ 33
2.12 BIOS ..................................................................................................................... 33
2.13 OPERATING TEMPERATURE AND TEMPERATURE CONTROL..................................... 33
2.14 POWER CONSUMPTION........................................................................................... 34
2.15 PXE: PRE-BOOT EXECUTION ENVIRONMENT ........................................................ 34
2.16 PACKAGED CONTENTS AND OPTIONAL ACCESSORY ITEMS..................................... 35
2.16.1 Package Contents........................................................................................... 35
2.16.2 Optional Accessory Items............................................................................... 35
Page 3

KINO-LX Motherboard
3CONNECTORS AND JUMPERS ......................................................................... 37
3.1 PERIPHERAL INTERFACE CONNECTORS .................................................................... 38
3.1.1 KINO-LX Layout.............................................................................................. 38
3.1.2 Peripheral Interface Connectors ..................................................................... 38
3.1.3 External Peripheral Interface Connectors....................................................... 40
3.1.4 On-board Jumpers ........................................................................................... 40
3.2 INTERNAL PERIPHERAL CONNECTORS...................................................................... 41
3.2.1 AT/ATX Power Connector................................................................................ 41
3.2.2 CD-IN Connector............................................................................................. 43
3.2.3 5V Fan Connector............................................................................................ 44
3.2.4 12V Fan Connector.......................................................................................... 45
3.2.5 Floppy Disk Connector .................................................................................... 46
3.2.6 Front Panel Connector .................................................................................... 47
3.2.7 GPIO Connector .............................................................................................. 49
3.2.8 IDE Connectors ............................................................................................... 50
3.2.9 Inverter Power Connector ............................................................................... 53
3.2.10 Keyboard/Mouse Connector .......................................................................... 54
3.2.11 LCD LVDS Connector.................................................................................... 55
3.2.12 LCD TTL Connector ...................................................................................... 57
3.2.13 PCI Slot.......................................................................................................... 58
3.2.14 RS-232/422/485 Serial Port Connector ......................................................... 62
3.2.15 RS-232 COM Serial Port Connector ............................................................. 63
3.2.16 SATA Drive Connectors ................................................................................. 64
3.3 EXTERNAL PERIPHERAL INTERFACE CONNECTOR PANEL ......................................... 65
3.3.1 Keyboard/Mouse Connector ............................................................................ 66
3.3.2 Serial Port Connector ...................................................................................... 67
3.3.3 Parallel Port Connector .................................................................................. 68
3.3.4 VGA connector................................................................................................. 69
3.3.5 LAN Connectors............................................................................................... 70
3.3.6 USB Connectors............................................................................................... 71
3.3.7 Audio Connector .............................................................................................. 72
4INSTALLATION .................................................................................................... 73
4.1 ANTI-STATIC PRECAUTIONS...................................................................................... 74
4.2 INSTALLATION CONSIDERATIONS ............................................................................. 74
4.2.1 Installation Notices .......................................................................................... 74
Page 4
IEI®Technology, Corp.

KINO-LX Motherboard
4.3 UNPACKING.............................................................................................................. 75
4.3.1 Unpacking Precautions.................................................................................... 75
4.3.2 Checklist........................................................................................................... 76
4.4 KINO-LX MOTHERBOARD INSTALLATION .............................................................. 76
4.4.1 Preinstalled Components ................................................................................. 77
4.4.2 Components to Install ...................................................................................... 77
4.4.3 DIMM Module Installation .............................................................................. 77
4.4.3.1 Purchasing the Memory Module............................................................... 77
4.4.3.2 DIMM Module Installation....................................................................... 77
4.5 PERIPHERAL DEVICE CONNECTION .......................................................................... 78
4.5.1 IDE Disk Drive Connectors (CN29 Primary, CN28 Secondary)..................... 79
4.5.2 COM3-COM6 RS-232 Serial Port Installation................................................ 80
4.5.3 COM2 RS-232/485 Serial Port Installation..................................................... 80
4.5.4 LCD Backlight Installation .............................................................................. 81
4.5.5 Power Connection............................................................................................ 81
4.5.6 LVDS LCD Installation.................................................................................... 81
4.5.7 TTL LCD Installation....................................................................................... 81
4.6 JUMPER SETTINGS.................................................................................................... 82
4.6.1 Clear CMOS Jumper........................................................................................ 83
4.6.2 LCD Voltage Select Jumper ............................................................................. 84
4.6.3 COM2 RS-232/422/485 Select ......................................................................... 85
4.6.4 COM1/2 RI and Voltage Select Jumper ........................................................... 85
4.6.5 LCD Clock Jumper .......................................................................................... 86
4.6.6 AT/ATX Power Mode Select Jumper................................................................ 86
4.7 CHASSIS INSTALLATION ........................................................................................... 87
4.8 REAR PANEL CONNECTORS ...................................................................................... 87
4.8.1 Keyboard and Mouse Connection.................................................................... 87
4.8.2 Serial Connection............................................................................................. 88
4.8.3 Parallel Connector........................................................................................... 88
4.8.4 LCD Panel Connection .................................................................................... 88
4.8.5 Ethernet Connection ........................................................................................ 88
4.8.6 USB Connection............................................................................................... 88
4.8.7 Audio Interface................................................................................................. 88
5BIOS SETTINGS .................................................................................................... 89
5.1 INTRODUCTION ........................................................................................................ 90
Page 5

KINO-LX Motherboard
5.1.1 Starting Setup................................................................................................... 90
5.1.2 Using Setup ...................................................................................................... 91
5.1.3 Getting Help..................................................................................................... 91
5.1.4 Unable to Reboot After Configuration Changes.............................................. 92
5.1.5 Main BIOS Menu ............................................................................................. 92
5.2 STANDARD CMOS FEATURES .................................................................................. 94
5.2.1 IDE Primary Master/Slave .............................................................................. 97
5.3 ADVANCED BIOS FEATURES .................................................................................. 100
5.4 ADVANCED CHIPSET FEATURES.............................................................................. 107
5.4.1 Flat Panel Configuration............................................................................... 109
5.5 INTEGRATED PERIPHERALS .....................................................................................113
5.6 POWER MANAGEMENT SETUP.................................................................................119
5.7 PNP/PCI CONFIGURATIONS ................................................................................... 122
5.8 PC HEALTH STATUS ............................................................................................... 126
6DRIVER INSTALLATION.................................................................................. 129
6.1 AVAILABLE SOFTWARE DRIVERS ............................................................................ 130
6.2 VGA DRIVER......................................................................................................... 133
6.3 AUDIO DRIVER INSTALLATION ............................................................................... 142
6.4 LAN DRIVER ......................................................................................................... 147
6.5 SATA/RAID DRIVER............................................................................................. 150
6.6 ISA DRIVER ........................................................................................................... 156
ABIOS MENU OPTIONS....................................................................................... 163
A.1 BIOS CONFIGURATION OPTIONS........................................................................... 164
BWATCHDOG TIMER .......................................................................................... 167
CADDRESS MAPPING.......................................................................................... 171
C.1 IO ADDRESS MAP ................................................................................................. 172
C.2 1ST MB MEMORY ADDRESS MAP ......................................................................... 172
C.3 IRQ MAPPING TABLE ............................................................................................ 173
C.4 DMA CHANNEL ASSIGNMENTS............................................................................. 173
DEXTERNAL AC’97 AUDIO CODEC ................................................................. 175
D.1 INTRODUCTION ..................................................................................................... 176
D.1.1 Accessing the AC’97 CODEC ....................................................................... 176
D.1.2 Driver Installation......................................................................................... 176
Page 6
IEI®Technology, Corp.

KINO-LX Motherboard
D.2 SOUND EFFECT CONFIGURATION........................................................................... 177
D.2.1 Accessing the Sound Effects Manager .......................................................... 177
D.2.2 Sound Effect Manager Configuration Options ............................................. 178
EALI®RAID FOR SATA........................................................................................ 181
E.1 INTRODUCTION ...................................................................................................... 182
E.1.1 Precautions.................................................................................................... 182
E.2 FEATURES AND BENEFITS ...................................................................................... 183
E.3 ACCESSING THE ALI RAID UTILITY...................................................................... 183
E.4 RAID OPTIONS: .................................................................................................... 185
E.4.1 Create RAID 0 Striping for Performance ...................................................... 185
E.4.2 Create RAID 1 Mirroring for Reliability....................................................... 188
E.4.3 Create JBOD for Integrated Capacity........................................................... 190
E.4.4 Stripe Size ...................................................................................................... 191
E.4.5 Delete RAID Setting & Partition................................................................... 191
E.4.6 Delete All RAID Setting & Partition ............................................................. 192
E.4.7 Rebuild RAID Array ...................................................................................... 192
E.4.8 Select Boot Drive........................................................................................... 193
INDEX............................................................................................................................ 195
Page 7

KINO-LX Motherboard
List of Figures
Figure 1-1: KINO-LX Overview ...................................................................................17
Figure 2-1: Data Flow Block Diagram........................................................................24
Figure 2-2: PXE: Pre-Boot Execution Environment.................................................34
Figure 3-1: Connector and Jumper Locations .........................................................38
Figure 3-2: AT/ATX Power Connector Pinouts.........................................................41
Figure 3-3: CD-IN Connector Pinout Locations .......................................................43
Figure 3-4: 5V Fan Connector Pinout Locations......................................................44
Figure 3-5: Fan Connector Pinout Locations ...........................................................45
Figure 3-6: FDD Pinout Locations .............................................................................46
Figure 3-7: Front Panel Connector Pinout Locations..............................................48
Figure 3-8: GPIO Connector Pinout Locations ........................................................49
Figure 3-9: IDE Device Connector Locations ...........................................................51
Figure 3-10: Inverter Connector Locations ..............................................................53
Figure 3-11: Keyboard/Mouse Connector Location.................................................54
Figure 3-12: LCD LVDS Connector Locations..........................................................55
Figure 3-13: LCD TTL Connector Locations.............................................................57
Figure 3-14: PCI Slot Location ...................................................................................59
Figure 3-15: RS-232/422/485 Serial Port Connector Pinout Locations ..................62
Figure 3-16: RS-232 Serial Port Connector Pinout Locations ................................63
Figure 3-17: SATA Drive Connector Pinout Locations............................................64
Figure 3-18: KINO-LX External Peripheral Interface Connector Panel ..................65
Figure 3-19: Keyboard/Mouse Connector Pinouts ..................................................66
Figure 3-20: Serial Port Connector............................................................................67
Figure 3-21 Parallel Port Connector Pinout Locations............................................68
Figure 3-22: VGA Connector ......................................................................................69
Figure 3-23: RJ-45Ethernet Connector .....................................................................70
Figure 3-24: Audio Connector....................................................................................72
Figure 4-1: DIMM Module Installation........................................................................78
Figure 4-2: Connection of IDE1 Connector ..............................................................79
Page 8
IEI®Technology, Corp.

KINO-LX Motherboard
Figure 4-3: Jumper Locations....................................................................................83
Figure 6-1: AMD LX/GX CD Main Menu.................................................................. 131
Figure 6-2: AMD LX/GX CD Driver Menu................................................................ 132
Figure 6-3: Access Windows Control Panel.......................................................... 133
Figure 6-4: Double Click the System Icon ............................................................. 134
Figure 6-5: Double Click the Device Manager Tab................................................ 134
Figure 6-6: Device Manager List ............................................................................. 135
Figure 6-7: Expand the Display Adapters Category ............................................. 136
Figure 6-8: Update Driver ........................................................................................ 137
Figure 6-9: Upgrade Device Driver Wizard ............................................................ 138
Figure 6-10: Search for Suitable Driver.................................................................. 139
Figure 6-11: Locate Driver Files.............................................................................. 140
Figure 6-12: Location Browsing Window............................................................... 141
Figure 6-13: Access Windows Control Panel........................................................ 142
Figure 6-14: Double Click the System Icon ........................................................... 143
Figure 6-15: Double Click the Device Manager Tab.............................................. 143
Figure 6-16: Device Manager List ........................................................................... 144
Figure 6-17: Search for Suitable Driver.................................................................. 145
Figure 6-18: Locate Driver Files.............................................................................. 146
Figure 6-19: Location Browsing Window............................................................... 147
Figure 6-20: Locate the Setup Program Icon ........................................................ 147
Figure 6-21: Preparing Setup Screen..................................................................... 148
Figure 6-22: Install Wizard Welcome Screen......................................................... 148
Figure 6-23: Installing Screen ................................................................................. 149
Figure 6-24: Restart the Computer ......................................................................... 150
Figure 6-25: Locate the Setup Program Icon ........................................................ 151
Figure 6-26: Preparing Setup Screen..................................................................... 151
Figure 6-27: Install Wizard Welcome Screen......................................................... 152
Figure 6-28: Installing Screen ................................................................................. 153
Figure 6-29: RAID Driver Digital Signal.................................................................. 154
Figure 6-30: InstallShield Wizard Complete Screen ............................................. 155
Figure 6-31: Access Windows Control Panel........................................................ 156
Page 9

KINO-LX Motherboard
Figure 6-32: Double Click the System Icon ........................................................... 157
Figure 6-33: Double Click the Device Manager Tab.............................................. 157
Figure 6-34: Device Manager List ........................................................................... 158
Figure 6-35: Search for Suitable Driver.................................................................. 159
Figure 6-36: Locate Driver Files.............................................................................. 160
Figure 6-37: Location Browsing Window............................................................... 161
Page 10
IEI®Technology, Corp.

KINO-LX Motherboard
List of Tables
Table 1-1: Technical Specifications ..........................................................................20
Table 2-1: Geode LX Graphics Processor Features ................................................26
Table 2-2: Power Consumption .................................................................................34
Table 3-1: Peripheral Interface Connectors..............................................................39
Table 3-2: Rear Panel Connectors.............................................................................40
Table 3-3: On-board Jumpers ....................................................................................40
Table 3-4: AT/ATX Power Connector Pinouts ..........................................................42
Table 3-5: CD-IN Connector Pinouts .........................................................................43
Table 3-6: 5V Fan Connector Pinouts .......................................................................44
Table 3-7: Fan Connector Pinouts.............................................................................45
Table 3-8: FDD Connector Pinouts............................................................................47
Table 3-9: Front Panel Connector Pinouts ...............................................................48
Table 3-10: GPIO Connector Pinouts ........................................................................49
Table 3-11: IDE Connector Pinouts ...........................................................................52
Table 3-12: Inverter Power Connector Pinouts ........................................................53
Table 3-13: Keyboard/Mouse Connector Pinouts ....................................................54
Table 3-14: LCD LVDS Connector Pinouts ...............................................................56
Table 3-15: LCD TTL Connector Pinouts ..................................................................58
Table 3-16: PCI Slot ....................................................................................................61
Table 3-17: RS-232/422/485 Serial Port Connector Pinouts....................................62
Table 3-18: RS-232 Serial Port Connector Pinouts..................................................64
Table 3-19: SATA Drive Connector Pinouts .............................................................65
Table 3-20: Keyboard/Mouse Connector Pinouts ....................................................66
Table 3-21: Serial Port Connector Pinouts ...............................................................67
Table 3-22: Parallel Port Pinouts ...............................................................................68
Table 3-23: VGA Connector Pinouts .........................................................................69
Table 3-24: LAN Pinouts.............................................................................................70
Table 3-25: RJ-45 Ethernet Connector LEDs............................................................71
Page 11

KINO-LX Motherboard
Table 3-26: USB Port Pinouts ....................................................................................71
Table 4-1: IEI Provided Cables...................................................................................79
Table 4-2: Jumpers ....................................................................................................82
Table 4-3: Clear CMOS Jumper Settings ..................................................................84
Table 4-4: LCD Voltage Setup Jumper Settings.......................................................84
Table 4-5: COM2 RS-232/422/485 Select Settings....................................................85
Table 4-6: COM2 Voltage Setup Jumper Settings....................................................86
Table 4-7: LCD Clock Jumper Settings.....................................................................86
Table 4-8: AT/ATX Power Mode Select Jumper Settings ........................................87
Table 5-1: BIOS Navigation Keys...............................................................................91
Page 12
IEI®Technology, Corp.

KINO-LX Motherboard
List of BIOS Menus
BIOS Menu 1: AwardBIOS CMOS Setup Utility ........................................................92
BIOS Menu 2: Standard CMOS Features ..................................................................94
BIOS Menu 3: IDE Primary Master.............................................................................97
BIOS Menu 4: Advanced BIOS Features................................................................ 100
BIOS Menu 5: Advanced Chipset Features ........................................................... 107
BIOS Menu 6: Flat Panel Configuration ................................................................. 109
BIOS Menu 7: Integrated Peripherals..................................................................... 113
BIOS Menu 8: Power Management Setup.............................................................. 119
BIOS Menu 9: PnP/PCI Configurations .................................................................. 122
BIOS Menu 10: IRQ Resources ............................................................................... 123
BIOS Menu 11: Memory Resources........................................................................ 125
BIOS Menu 12: PC Health Status............................................................................ 126
Page 13

KINO-LX Motherboard
Glossary
AC ’97 Audio Codec 97
ACPI Advanced Configuration and
Power Interface
APM Advanced Power Management
ARMD ATAPI Removable Media Device
ASKIR Shift Keyed Infrared
ATA Advanced Technology
Attachments
BIOS Basic Input/Output System
CFII Compact Flash Type 2
CMOS Complementary Metal Oxide
Semiconductor
CPU Central Processing Unit
Codec Compressor/Decompressor
COM Serial Port
DAC Digital to Analog Converter
DDR Double Data Rate
DIMM Dual Inline Memory Module
DIO Digital Input/Output
DMA Direct Memory Access
EIDE Enhanced IDE
EIST Enhanced Intel SpeedStep
Technology
FDD Floppy Disk Drive
FDC Floppy Disk Connector
FFIO Flexible File Input/Output
FIFO First In/First Out
FSB Front Side Bus
IrDA Infrared Data Association
HDD Hard Disk Drive
IDE Integrated Data Electronics
I/O Input/Output
ICH4 I/O Controller Hub 4
L1 Cache Level 1 Cache
L2 Cache Level 2 Cache
LCD Liquid Crystal Display
LPT Parallel Port Connector
LVDS Low Voltage Differential Signaling
MAC Media Access Controller
OS Operating System
PCI Peripheral Connect Interface
PIO Programmed Input Output
PnP Plug and Play
POST Power On Self Test
RAM Random Access Memory
SATA Serial ATA
S.M.A.R.T Self Monitoring Analysis and
Reporting Technology
SPD Serial Presence Detect
S/PDI Sony/Philips Digital Interface
SDRAM Synchronous Dynamic Random
Access Memory
SIR Serial Infrared
UART Universal Asynchronous
Receiver-transmitter
USB Universal Serial Bus
VGA Video Graphics Adapter
Page 14
IEI®Technology, Corp.

Page 15
KINO-LX Motherboard
Chapter
1
1 Introduction

Page 16
IEI®Technology, Corp.
KINO-LX Motherboard
1.1 KINO-LX Motherboard Overview
The mini-ITX form factor KINO-LX is fully equipped with advanced multi-mode I/Os. The
KINO-LX is designed for system manufacturers, integrators, and VARs that want
performance, reliability, and quality at a reasonable price. The KINO-LX is equipped with
an on-board low-power consumption and high performance AMD™ Geode™ LX 800
processor.
1.1.1 KINO-LX Applications
The KINO-LX is designed for applications in the following areas:
 Industrial PC applications
 Human Machine Interface (HMI) applications
 Marine, GPS and transportation applications
 Financial, retail and kiosk applications
1.1.2 KINO-LX Benefits
Some of the KINO-LX benefits include:
 Low power, high performance
 Multiple storage option integration including
o 40 Pin IFM or 3.5”HDD
o 34 Pin floppy disk drive (FDD) support
o Dual SATA ports with RAID 0 and RAID 1 support
 Data security SATA RAID support
1.1.3 KINO-LX Features
Some of the KINO-LX features are listed below:
 Complies with mini-ITX form factor
 Complies with RoHS
 Embedded AMDGeode™ LX 800 CPU
 Supports a maximum front side bus (FSB) speed up to 500MHz
 DDR 333MHz up to 1GB
 Complete I/O support with IDE, Dual LAN, 4 x USB2.0 and 6 x COM ports

Page 17
KINO-LX Motherboard
 Supports 24-bit TTL LCD and single channel 18-bit LVDS LCD
 Comes with two high performance 10/100MB Ethernet controllers
 Supports two SATA channels with transfer rates up to 150Mb/s
1.2 KINO-LX Overview
Figure 1-1: KINO-LX Overview
1.2.1 KINO-LX Connectors
The KINO-LX has the following connectors onboard:
 1 x 184-pin DDR DIMM socket
 1 x AT/ATX power connector
 1 x CD-IN connector

Page 18
IEI®Technology, Corp.
KINO-LX Motherboard
 2 x Fan connectors
 1 x Floppy disk connector
 1 x Front panel connector
 1 x GPIO connector
 2 x IDE Interface connectors
 1 x Inverter power connector
 1 x Keyboard/Mouse connector
 1 x LCD LVDS interface Connector
 1 x LCD TTL interface Connector
 1 x RS-422/485 serial port connector
 1 x PCI slot connector
 4 x RS-232 serial port connectors
 1 x RS-232/422/485 serial port connector
 2 x SATA connectors
The KINO-LX has the following connectors on the board rear panel:
 1 x Audio connector (two audio jacks)
 2 x Ethernet connectors
 2 x PS/2 keyboard/mouse connectors
 1 x LPT port connector
 1 x RS-232 serial port connector
 4 x USB connectors
 1 x VGA connector
The KINO-LX has the following onboard jumpers:
 AT/ATX power mode select
 Clear CMOS
 COM1/2 RI and voltage select
 COM2 RS-232/422/485 select
 LCD clock setup
 LCD voltage select
The location of these connectors on the motherboard can be seen in Figure 1-1. These
connectors are fully described in Chapter 3.

Page 19
KINO-LX Motherboard
1.2.2 Technical Specifications
KINO-LX technical specifications are listed in Table 1-1. Detailed descriptions of each
specification can be found in Chapter 2.
SPECIFICATION DESCRIPTION
CPUs Supported AMDGeodeLX 800
Cache Memory 64K I/ 64k D L1 cache, 128K L2 cache
System Chipset AMDCS5536
I/O Controller AMDCS5536
Memory One 184-pin DDR 333MHz DIMM up to 1GB
PCI Bus Interface Revision 2.2
Super IO W83627EHG
Display CRT integrated in AMD™ LX 800
LVDS Single channel 18 bit LVDS integrated in AMD™ LX 800
TTL 24 bit TTL integrated in AMD LX 800
HDD Interface One IDE channel supports two
Ultra ATA 100/66/33 devices
Power Support ATX power support
Power Consumption +5V @ 1.45A, +12V @ 0.08A
LX-800, 500MHz, DDR 333MHz/512MHz MB-HCT
Power Management Supports Advanced Configuration and Power Interface
(ACPI) Specifications Revision 2.0
Watchdog Timer Software programmable supports
1~255 sec. system reset
Serial ATA (SATA) Two SATA channels with 150Mb/s transfer rates
Floppy Disk Drive (FDD) Supports FDD
USB Interfaces Four USB 2.0 connectors supported
Serial Ports Six RS-232 and one RS422/485 COM ports
Audio Interfaces Realtek ALC203
PCI Interface PCI slot connector
Real Time Clock 256-byte battery backed CMOS RAM
Hardware Monitoring CPU temperature and system voltages
Ethernet 10/100 Base-T RTL8100C
BIOS AWARD

Page 20
IEI®Technology, Corp.
KINO-LX Motherboard
SPECIFICATION DESCRIPTION
Physical Dimensions 170mm x 170mm
Operating Temperature Minimum: 0ºC (32°F) - Maximum: 60°C (140°F)
Operating Humidity Minimum: 5% - Maximum: 95%
Weight Gross: 1.1Kg - Net: 500g
Table 1-1: Technical Specifications