IEI Technology KINO-945GSE User manual

KINO-945GSE Motherboard
Page i
IEI Technology Corp.
User Manual
MODEL:
Rev. 1.10 – 8 October, 2010
KINO-945GSE
Mini-ITX Motherboard with 45 nm Intel
®
AtomCPU
DDR2 Memory (up to 2 GB), VGA, DVI, LVDS, HDTV
Dual PCIe GbE, CompactFlash®, Dual SATA and PCIe Mini
User Manual

KINO-945GSE Motherboard
Page ii
Revision
Date Version Changes
8 October, 2010 1.10 Update for R11 version
9 June, 2010 1.06 Minor edit
16 April, 2009 1.05 Minor edits
12 March, 2009 1.04 Updated product name
06 March, 2009 1.03 Minor edits
20 February, 2009 1.02 DVI output information updated
24 December, 2008 1.01 Update LVDS jumper settings
31 October 2008 1.00 Initial release

KINO-945GSE Motherboard
Page iii
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.

KINO-945GSE Motherboard
Page iv
Packing List
NOTE:
If any of the components listed in the checklist below are missing,
please do not proceed with the installation. Contact the IEI reseller or
vendor you purchased the KINO-945GSE from or contact an IEI sales
representative directly. To contact an IEI sales representative, please
send an email to [email protected].
The items listed below should all be included in the KINO-945GSE package.
1 x KINO-945GSE Mini-ITX Motherboard
1 x Dual RS-232 cable
2 x SATA cable
1 x I/O shielding
1 x Mini jumper pack
1 x Utility CD
1 x QIG (quick installation guide)
Images of the above items are shown in Chapter 3.

KINO-945GSE Motherboard
Page v
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 INTRODUCTION........................................................................................................... 2
1.2 KINO-945GSE OVERVIEW........................................................................................ 2
1.2.1 Overview Photo.................................................................................................. 2
1.2.2 Peripheral Connectors and Jumpers................................................................. 3
1.2.3 Technical Specifications..................................................................................... 4
2 DETAILED SPECIFICATIONS.................................................................................. 7
2.1 DIMENSIONS............................................................................................................... 8
2.1.1 Board Dimensions.............................................................................................. 8
2.1.2 External Interface Panel Dimensions................................................................ 9
2.2 DATA FLOW.............................................................................................................. 10
2.3 EMBEDDED INTEL®ATOM™PROCESSOR .................................................................11
2.3.1 Overview...........................................................................................................11
2.3.2 Features ............................................................................................................11
2.3.3 Front Side Bus (FSB)....................................................................................... 12
2.4 INTEL®945GSE NORTHBRIDGE CHIP ..................................................................... 13
2.4.1 DDR2 Controller.............................................................................................. 13
2.4.2 Graphics........................................................................................................... 14
2.4.2.1 Analog CRT (VGA) .................................................................................. 15
2.4.2.2 LVDS ........................................................................................................ 15
2.4.2.3 TV Out ...................................................................................................... 15
2.4.2.4 SDVO and DVI......................................................................................... 16
2.5 INTEL®ICH7M SOUTHBRIDGE CHIPSET ................................................................. 16
2.5.1 Audio Codec ’97 Controller............................................................................. 18
2.5.2 IDE Interface ................................................................................................... 18
2.5.2.1 IDE Connector.......................................................................................... 18
2.5.2.2 CompactFlash® Slot................................................................................. 19
2.5.3 Low Pin Count (LPC) Interface....................................................................... 20
2.5.4 PCI Bus............................................................................................................ 20
2.5.4.1 PCI Expansion Card Slot.......................................................................... 21

KINO-945GSE Motherboard
Page vi
2.5.5 PCIe Bus .......................................................................................................... 21
2.5.5.1 PCIe GbE Ethernet.................................................................................... 21
2.5.5.2 PCIe Mini Card......................................................................................... 23
2.5.6 Real Time Clock............................................................................................... 23
2.5.7 SATA Controller............................................................................................... 24
2.5.8 USB Controller ................................................................................................ 24
2.6 LPC BUS COMPONENTS ........................................................................................... 25
2.6.1 BIOS Chipset.................................................................................................... 26
2.6.2 iTE IT8718F Super I/O chipset........................................................................ 26
2.6.2.1 LPC Interface............................................................................................ 27
2.6.2.2 16C550 UARTs......................................................................................... 27
2.6.2.3 Digital Input/Output.................................................................................. 27
2.6.2.4 Enhanced Hardware Monitor.................................................................... 27
2.6.2.5 Fan Speed Controller ................................................................................ 27
2.6.2.6 Keyboard/Mouse Controller ..................................................................... 28
2.6.2.7 Parallel Port............................................................................................... 28
2.6.3 Fintek F81216D LPC Serial Port Chipset....................................................... 28
2.7 ENVIRONMENTALAND POWER SPECIFICATIONS ....................................................... 28
2.7.1 System Monitoring ........................................................................................... 28
2.7.2 Operating Temperature and Temperature Control........................................... 29
2.7.3 Power Consumption......................................................................................... 30
3 UNPACKING............................................................................................................... 31
3.1ANTI-STATIC PRECAUTIONS...................................................................................... 32
3.2 UNPACKING.............................................................................................................. 32
3.2.1 Unpacking Precautions.................................................................................... 32
3.3 UNPACKING CHECKLIST........................................................................................... 33
3.3.1 Package Contents............................................................................................. 33
3.3.2 Optional Items.................................................................................................. 34
4 CONNECTORS ........................................................................................................... 35
4.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 36
4.1.1 Layout .............................................................................................................. 36
4.1.2 Internal Peripheral Interface Connectors ....................................................... 37
4.1.3 External Interface Panel Connectors............................................................... 38

KINO-945GSE Motherboard
Page vii
4.2 INTERNAL PERIPHERAL CONNECTORS...................................................................... 39
4.2.1 ATX Power Connector ..................................................................................... 39
4.2.2 Battery Connector............................................................................................ 40
4.2.3 CompactFlash® Socket.................................................................................... 41
4.2.4 Digital I/O Connector...................................................................................... 43
4.2.5 Fan Connector................................................................................................. 44
4.2.6 Front Panel Connector .................................................................................... 45
4.2.7 IDE Connector................................................................................................. 46
4.2.8 Infrared Interface Connector........................................................................... 48
4.2.9 LCD Backlight Inverter Connector.................................................................. 49
4.2.10 LVDS LCD Connector ................................................................................... 50
4.2.11 PCIe Mini Card Slot....................................................................................... 51
4.2.12 SATA Drive Connectors ................................................................................. 53
4.2.13 Serial Port Connectors (RS-232)................................................................... 54
4.2.14 Serial Port Connectors (RS-422/485)............................................................ 55
4.2.15 TV Out Connector.......................................................................................... 56
4.2.16 USB Connectors............................................................................................. 58
4.3 EXTERNAL PERIPHERAL INTERFACE CONNECTOR PANEL ......................................... 59
4.3.1 Audio Connector .............................................................................................. 59
4.3.2 Keyboard/Mouse Connector ............................................................................ 60
4.3.3 DVI Connector................................................................................................. 61
4.3.4 LAN Connectors............................................................................................... 61
4.3.5 Serial Port Connectors .................................................................................... 62
4.3.6 USB Connectors............................................................................................... 63
4.3.7 VGA Connector................................................................................................ 64
5 INSTALLATION ......................................................................................................... 65
5.1ANTI-STATIC PRECAUTIONS...................................................................................... 66
5.2 INSTALLATION CONSIDERATIONS.............................................................................. 67
5.2.1 Installation Notices.......................................................................................... 67
5.2.2 Installation Checklist....................................................................................... 68
5.3 UNPACKING.............................................................................................................. 68
5.4 SO-DIMM INSTALLATION ....................................................................................... 69
5.5 CF CARD INSTALLATION .......................................................................................... 70
5.6 JUMPER SETTINGS .................................................................................................... 71

KINO-945GSE Motherboard
Page viii
5.6.1 AT/ATX Selection ............................................................................................. 72
5.6.2 Clear CMOS Jumper........................................................................................ 73
5.6.3 CF Card Setup ................................................................................................. 74
5.6.4 COM3 RS-232/422/485 Selection Jumper....................................................... 75
5.6.5 LCD Panel Type Selection ............................................................................... 76
5.6.6 LVDS Voltage Selection.................................................................................... 77
5.7 CHASSIS INSTALLATION............................................................................................ 78
5.7.1 Airflow.............................................................................................................. 78
5.7.2 Motherboard Installation................................................................................. 79
5.8 INTERNAL PERIPHERAL DEVICE CONNECTIONS........................................................ 79
5.8.1 ATA Flat Cable Connection ............................................................................. 80
5.8.2 SATA Drive Connection ................................................................................... 81
5.8.3 Dual RS-232 Cable with Slot Bracket.............................................................. 82
5.8.4 USB Cable (Dual Port) with Slot Bracket ....................................................... 83
5.9 EXTERNAL PERIPHERAL INTERFACE CONNECTION ................................................... 85
5.9.1 LAN Connection (Single Connector)............................................................... 85
5.9.2 PS/2 Y-Cable Connection................................................................................. 86
5.9.3 Serial Device Connection ................................................................................ 87
5.9.4 USB Connection (Dual Connector)................................................................. 88
5.9.5 VGA Monitor Connection ................................................................................ 89
6 BIOS SETUP................................................................................................................ 91
6.1 INTRODUCTION......................................................................................................... 92
6.1.1 Starting Setup................................................................................................... 92
6.1.2 Using Setup...................................................................................................... 92
6.1.3 Getting Help..................................................................................................... 93
6.1.4 Unable to Reboot After Configuration Changes.............................................. 93
6.1.5 BIOS Menu Bar................................................................................................ 93
6.2 MAIN........................................................................................................................ 94
6.3ADVANCED............................................................................................................... 95
6.3.1 CPU Configuration.......................................................................................... 97
6.3.2 IDE Configuration........................................................................................... 98
6.3.2.1 IDE Master, IDE Slave ........................................................................... 100
6.3.3 Super IO Configuration ................................................................................. 105
6.3.4 Hardware Health Configuration.................................................................... 108

KINO-945GSE Motherboard
Page ix
6.3.5 Power Configuration.......................................................................................112
6.3.5.1 APM Configuration..................................................................................113
6.3.6 Remote Configuration.....................................................................................116
6.3.7 USB Configuration......................................................................................... 120
6.4 PCI/PNP................................................................................................................. 121
6.5 BOOT...................................................................................................................... 124
6.5.1 Boot Settings Configuration........................................................................... 125
6.5.2 Boot Device Priority...................................................................................... 127
6.6 SECURITY............................................................................................................... 127
6.7 CHIPSET ................................................................................................................. 128
6.7.1 Northbridge Chipset Configuration............................................................... 130
6.7.2 Southbridge Configuration ............................................................................ 133
6.8 EXIT....................................................................................................................... 134
7 SOFTWARE INSTALLATION................................................................................ 136
7.1AVAILABLE SOFTWARE DRIVERS ............................................................................ 137
7.2 STARTING THE DRIVER PROGRAM .......................................................................... 137
7.3 CHIPSET DRIVER INSTALLATION............................................................................. 139
7.4 VGADRIVER INSTALLATION.................................................................................. 142
7.5 LAN DRIVER INSTALLATION.................................................................................. 147
7.6AUDIO DRIVER INSTALLATION ............................................................................... 149
A BIOS OPTIONS ........................................................................................................ 152
B TERMINOLOGY...................................................................................................... 156
C DIGITAL I/O INTERFACE..................................................................................... 160
C.1 INTRODUCTION...................................................................................................... 161
C.2 DIO CONNECTOR PINOUTS.................................................................................... 161
C.3ASSEMBLY LANGUAGE SAMPLES........................................................................... 162
C.3.1 Enable the DIO Input Function..................................................................... 162
C.3.2 Enable the DIO Output Function.................................................................. 162
D WATCHDOG TIMER .............................................................................................. 163
E ADDRESS MAPPING .............................................................................................. 166
E.1 DIRECT MEMORYACCESS (DMA)......................................................................... 167
E.2 INPUT/OUTPUT (IO)............................................................................................... 167

KINO-945GSE Motherboard
Page x
E.3 INTERRUPT REQUEST (IRQ)................................................................................... 169
E.4 MEMORY................................................................................................................ 170
F HAZARDOUS MATERIALS DISCLOSURE........................................................ 171
F.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ..................................... 172

KINO-945GSE Motherboard
Page xi
List of Figures
Figure 1-1: KINO-945GSE ..............................................................................................................2
Figure 1-2: KINO-945GSE Overview .............................................................................................3
Figure 2-1: KINO-945GSE Dimensions (mm)...............................................................................8
Figure 2-2: External Interface Panel Dimensions (mm)..............................................................9
Figure 2-3: Data Flow Block Diagram.........................................................................................10
Figure 2-4: Intel® Atom™ N270 CPU..........................................................................................11
Figure 2-5: Front Side Bus...........................................................................................................12
Figure 2-6: Intel® 945GSE Northbridge Chip.............................................................................13
Figure 2-7: DDR2 SO-DIMM Socket.............................................................................................14
Figure 2-8: Graphics.....................................................................................................................15
Figure 2-9: Intel® ICH7M Southbridge Chipset .........................................................................17
Figure 2-10: IDE Connector .........................................................................................................18
Figure 2-11: CompactFlash® Slot...............................................................................................20
Figure 2-12: PCI Edge Connector ...............................................................................................21
Figure 2-13: Realtek PCI GbE Controllers..................................................................................22
Figure 2-14: PCIe Mini Card Slot.................................................................................................23
Figure 2-15: SATA Connectors ...................................................................................................24
Figure 2-16: Onboard USB Implementation...............................................................................25
Figure 2-17: LPC Bus ...................................................................................................................26
Figure 4-1: Connector and Jumper Locations [Front Side] .....................................................36
Figure 4-2: ATX Power Connector Pinout Locations................................................................39
Figure 4-3: Battery Connector Location.....................................................................................41
Figure 4-4: CF Card Socket Location .........................................................................................42
Figure 4-5: Digital I/O Connector Locations ..............................................................................43
Figure 4-6: CPU Fan Connector Location..................................................................................45
Figure 4-7: Front Panel Connector Pinout Locations...............................................................46
Figure 4-8: IDE Device Connector Locations ............................................................................47
Figure 4-9: Infrared Connector Pinout Locations .....................................................................48
Figure 4-10: LCD Backlight Connector Pinout Locations........................................................49
Figure 4-11: LVDS LCD Connector Pinout Locations...............................................................50

KINO-945GSE Motherboard
Page xii
Figure 4-12: PCIe Mini Card Slot Location.................................................................................52
Figure 4-13: SATA Drive Connector Locations .........................................................................54
Figure 4-14: RS-232 Connector Pinout Locations.....................................................................55
Figure 4-15: RS-422/485 Connector Pinout Locations..............................................................56
Figure 4-16: TV Connector Pinout Locations............................................................................57
Figure 4-17: USB Connector Pinout Locations.........................................................................58
Figure 4-18: KINO-945GSE External Peripheral Interface Connector.....................................59
Figure 4-19: Audio Connector.....................................................................................................60
Figure 4-20: PS/2 Pinouts ............................................................................................................60
Figure 4-21: RJ-45 Ethernet Connector......................................................................................62
Figure 4-22: RS-232 Serial Port Pinout Locations.....................................................................63
Figure 4-23: VGA Connector .......................................................................................................64
Figure 5-1: SO-DIMM Installation................................................................................................69
Figure 5-2: CF Card Installation..................................................................................................71
Figure 5-3: AT/ATX Power Selection Jumper Location............................................................73
Figure 5-4: Clear CMOS Jumper .................................................................................................74
Figure 5-5: CF Card Setup Jumper Location.............................................................................75
Figure 5-6: COM3 RS-232/422/485 Selection Jumper Location...............................................76
Figure 5-7: LCD Panel Type Selection Jumper Pinout Locations ...........................................77
Figure 5-8: LVDS Voltage Selection Jumper Pinout Locations...............................................78
Figure 5-9: IDE Cable Connection...............................................................................................80
Figure 5-10: SATA Drive Cable Connection...............................................................................81
Figure 5-11: SATA Power Drive Connection..............................................................................82
Figure 5-12: Dual RS-232 Cable Installation ..............................................................................83
Figure 5-13: Dual USB Cable Connection..................................................................................84
Figure 5-14: LAN Connection......................................................................................................86
Figure 5-15: PS/2 Keyboard/Mouse Connector.........................................................................87
Figure 5-16: Serial Device Connector.........................................................................................88
Figure 5-17: USB Connector........................................................................................................89
Figure 5-18: VGA Connector .......................................................................................................90
Figure 7-1: Start Up Screen ...................................................................................................... 138
Figure 7-2: Select Operating System....................................................................................... 138
Figure 7-3: Drivers..................................................................................................................... 139
Figure 7-4: Chipset Driver Welcome Screen........................................................................... 140
Figure 7-5: Chipset Driver License Agreement...................................................................... 140

KINO-945GSE Motherboard
Page xiii
Figure 7-6: Chipset Driver Read Me File ................................................................................. 141
Figure 7-7: Chipset Driver Setup Operations ......................................................................... 141
Figure 7-8: Chipset Driver Installation Finish Screen............................................................ 142
Figure 7-9: VGA Driver Read Me File....................................................................................... 143
Figure 7-10: VGA Driver Setup Files Extracted...................................................................... 143
Figure 7-11: VGA Driver Welcome Screen.............................................................................. 144
Figure 7-12: VGA Driver License Agreement.......................................................................... 144
Figure 7-13: VGA Driver Read Me File..................................................................................... 145
Figure 7-14: VGA Driver Setup Operations............................................................................. 146
Figure 7-15: VGA Driver Installation Finish Screen............................................................... 146
Figure 7-16: LAN Driver Welcome Screen .............................................................................. 147
Figure 7-17: LAN Driver Welcome Screen .............................................................................. 148
Figure 7-18: LAN Driver Installation ........................................................................................ 148
Figure 7-19: LAN Driver Installation Complete....................................................................... 149
Figure 7-20: Audio Driver Options........................................................................................... 150
Figure 7-21: AC’97 Driver Installation Welcome Screen........................................................ 150
Figure 7-22: AC’97 Driver Installation Verification................................................................. 151
Figure 7-23: AC’97 Driver Installation Complete.................................................................... 151

KINO-945GSE Motherboard
Page xiv
List of Tables
Table 1-1: Technical Specifications..............................................................................................6
Table 2-1: Supported HDD Specifications..................................................................................19
Table 2-2: Power Consumption...................................................................................................30
Table 3-1: Packing List.................................................................................................................34
Table 3-2: Power Consumption...................................................................................................34
Table 4-1: Peripheral Interface Connectors...............................................................................38
Table 4-2: Rear Panel Connectors..............................................................................................39
Table 4-3: ATX Power Connector Pinouts .................................................................................40
Table 4-4: Battery Connector Pinouts........................................................................................41
Table 4-5: CF Card Socket Pinouts.............................................................................................43
Table 4-6: DIO Connector Pinouts..............................................................................................44
Table 4-7: CPU Fan Connector Pinouts......................................................................................45
Table 4-8: Front Panel Connector Pinouts.................................................................................46
Table 4-9: IDE Connector Pinouts...............................................................................................48
Table 4-10: Infrared Connector Pinouts.....................................................................................49
Table 4-11: LCD Backlight Connector Pinouts..........................................................................50
Table 4-12: LVDS LCD Port Connector Pinouts........................................................................51
Table 4-13: PCIe Mini Card Slot Pinouts ....................................................................................53
Table 4-14: SATA Drive Connector Pinouts...............................................................................54
Table 4-15: RS-232 Connector Pinouts ......................................................................................55
Table 4-16: RS-422/485 Connector Pinouts ...............................................................................56
Table 4-17: TV Port Connector Pinouts......................................................................................58
Table 4-18: USB Port Connector Pinouts...................................................................................59
Table 4-19: PS/2 Connector Pinouts...........................................................................................61
Table 4-20: DVI Connector Pinouts.............................................................................................61
Table 4-21: LAN Pinouts ..............................................................................................................62
Table 4-22: RJ-45 Ethernet Connector LEDs.............................................................................62
Table 4-23: RS-232 Serial Port Pinouts ......................................................................................63
Table 4-24: USB Port Pinouts......................................................................................................64
Table 4-25: VGA Connector Pinouts...........................................................................................64

KINO-945GSE Motherboard
Page xv
Table 5-1: Jumpers.......................................................................................................................72
Table 5-2: AT/ATX Power Selection Jumper Settings...............................................................72
Table 5-3: Clear CMOS Jumper Settings....................................................................................74
Table 5-4: CF Card Setup Jumper Settings ...............................................................................74
Table 5-5: COM3 RS-232/422/485 Selection Jumper Pinouts...................................................75
Table 5-6: LCD Panel Type Selection Jumper Settings............................................................76
Table 5-7: LVDS Voltage Selection Jumper Settings................................................................78
Table 5-8: IEI Provided Cables....................................................................................................79
Table 6-1: BIOS Navigation Keys................................................................................................93

KINO-945GSE Motherboard
Page xvi
BIOS Menus
BIOS Menu 1: Main.......................................................................................................................94
BIOS Menu 2: Advanced..............................................................................................................96
BIOS Menu 3: CPU Configuration...............................................................................................97
BIOS Menu 4: IDE Configuration.................................................................................................98
BIOS Menu 5: IDE Master and IDE Slave Configuration........................................................ 100
BIOS Menu 6: Super IO Configuration..................................................................................... 105
BIOS Menu 7: Hardware Health Configuration....................................................................... 108
BIOS Menu 8: Power Configuration......................................................................................... 112
BIOS Menu 9:Advanced Power Management Configuration ................................................ 113
BIOS Menu 10: Remote Access Configuration....................................................................... 116
BIOS Menu 11: USB Configuration.......................................................................................... 120
BIOS Menu 12: PCI/PnP Configuration.................................................................................... 122
BIOS Menu 13: Boot.................................................................................................................. 124
BIOS Menu 14: Boot Settings Configuration.......................................................................... 125
BIOS Menu 15: Boot Device Priority Settings ........................................................................ 127
BIOS Menu 16: Security............................................................................................................ 128
BIOS Menu 17: Chipset............................................................................................................. 129
BIOS Menu 18: Northbridge Chipset Configuration............................................................... 130
BIOS Menu 19: Southbridge Chipset Configuration.............................................................. 133
BIOS Menu 20: Exit.................................................................................................................... 134

KINO-945GSE Motherboard
Page 1
Chapter
1
1 Introduction

KINO-945GSE Motherboard
Page 2
1.1 Introduction
Figure 1-1: KINO-945GSE
The KINO-945GSE Mini-ITX motherboards are embedded 45 nm Intel® Atom™
processor platforms. The embedded Intel® Atom™ N270 processor has a 1.60 GHz clock
speed, a 533 MHz FSB and a 512 KB L2 cache. The KINO-945GSE also supports one
200-pin 533 MHz 2.0 GB (max.) DDR2 SDRAM SO-DIMM. The board comes with VGA,
DVI, HDTV and 18-bit dual-channel LVDS video outputs. The KINO-945GSE also comes
with two PCI Express (PCIe) Gigabit Ethernet (GbE) connectors, onboard AC’97 audio,
three RS-232 serial ports, one RS-232/422/485 serial port, a CompactFlash® slot, six
USB 2.0 ports, IDE connector and PCI expansion card slot.
1.2 KINO-945GSE Overview
1.2.1 Overview Photo
The KINO-945GSE has a wide variety of peripheral interface connectors. 6Figure 1-2 is a
labeled photo of the peripheral interface connectors on the KINO-945GSE.

KINO-945GSE Motherboard
Page 3
Figure 1-2: KINO-945GSE Overview
1.2.2 Peripheral Connectors and Jumpers
The KINO-945GSE has the following connectors on-board:
1 x ATX power connector
1 x Battery connector
1 x CompactFlash® slot
1 x DDR2 SO-DIMM memory socket
1 x Digital I/O connector
1 x Fan connector

KINO-945GSE Motherboard
Page 4
1 x Front panel connector
1 x IDE connector (44-pin)
1 x Infrared connector
1 x LCD backlight inverter connector
1 x LVDS connector
1 x PCIe Mini slot
2 x RS-232 connectors
1 x RS-422/485 connector
2 x SATA connectors
1 x SPI
1 x TV output connector
1 x USB 2.0 connector (2 ports)
The KINO-945GSE has the following external peripheral interface connectors on the
board rear panel.
1 x Audio stereo output
1 x DVI
2 x LAN
1 x Microphone input
1 x PS/2 keyboard connector
1 x PS/2 mouse connector
2 x RS-232 serial ports
4 x USB 2.0
1 x VGA
The KINO-945GSE has the following on-board jumpers:
ATX power control
Clear CMOS
CompactFlash® card setup
LCD panel type selector
LCD voltage selector
1.2.3 Technical Specifications
KINO-945GSE technical specifications are listed in 6Table 1-1. See Chapter 2 for details.