IEI Technology KINO-DCM236 User manual

KINO-DCM236 Industrial Motherboard
Page I
User Manual
KINO-DCM236
MODEL:
Mini-ITX SBC Supports 6
th
GEN Intel
®
X
eon® E3, Core™ i3 or Celeron
®
CPU with Intel® CM236, HDMI 2.0, HDMI 1.4, Dual PCIe GbE,
PCIe Mini, PCIe x16, M.2, SATA 6Gb/s, USB 3.0, HD Audio, and RoHS
Rev. 1.00 - October 4, 2016
KINO-DCM236 CPU Card

KINO-DCM236 Industrial Motherboard
Page II
Revision
Date Version Changes
October 4, 2016 1.00 Initial release

KINO-DCM236 Industrial Motherboard
Page III
Safety Instructions
Warning! Read the user manual before connecting the system to the power
source.
Vorsicht! Bitte lesen Sie die Bedienungsanleitung, bevor Sie das System an eine
Stromquelle anschließen.
Attention! Avant de brancher le système à la source d'alimentation, consultez le
mode d'emploi.
Avvertenza! Consultare il manuale utente prima di collegare il sistema
all'alimentatore.
Atención! Lea atentamente este manual del usuario antes de operar la fuente de
alimentación.
警告！在將系統連接到電源之前，請仔細閱讀使用手冊。
警告！在将系统连接到电源之前，请仔细阅读使用手册。
Warning! To prevent the system from overheating, do not operate it in an area that
exceeds the maximum operating temperature described in the user manual.
Vorsicht! Um eine Überhitzung des Systems zu vermeiden, betreiben Sie es
ausschließlich im zulässigen Betriebstemperaturbereich. Dieser ist in der
Bedienungsanleitung vermerkt.
Attention! Pour éviter la surchauffe du système, ne l'utilisez pas dans une zone
dont la température dépasse les limites décrits dans le mode d'emploi.
Avvertenza! Per evitare che il sistema si surriscaldi, non utilizzarlo in aree che
superino la temperatura massima d'esercizio descritta nel manuale utente.
Atención! Para evitar el excesivo calentamiento del sistema, no opere en las
condiciones de temperatura superior a lo recomendado en este manual del
usuario.
警告！為防止系統過熱，不要在超過使用手冊上記載的產品工作溫度範圍之外操作
此系統。
警告！为防止系统过热，不要在超过使用手册上记载的产品工作温度范围之外操作
此系统。

KINO-DCM236 Industrial Motherboard
Page IV
Warning! Use only the adapter and power cord approved for this system. Use of
another type of adapter may risk fire or explosion. Please refer to the user manual
for the power adapter specifications.
Vorsicht! Nur zugelassene Netzteile und Netzkabel dürfen verwendet werden. Die
Benutzung von anderen Netzteilen kann einen Brand oder eine Explosion zur
Folge haben. Prüfen Sie die jeweiligen Spezifikationen in der
Bedienungsanleitung.
Attention! Utilisez exclusivement le câble d'alimentation et l’adaptateur
homologués pour ce système. L’utilisation d’un autre type d’adaptateur risquerait
de provoquer un incendie ou une explosion. Veuillez référer au mode d'emploi
pour les spécifications de l'adaptateur d'alimentation.
Avvertenza! Utilizzare solo l'adattatore e il cavo di alimentazione approvati per
questo sistema. L'uso di un altro tipo di adattatore può causare rischio d'incendio
o esplosione. Si prega di fare riferimento al manuale utente per le specifiche
sull'alimentazione.
Atención! Utilice solamente el adaptador de corriente alterna (CA) con Marcas
Conformidad otorgadas. Cualquier otro adaptador no otorgado aumenta el riesgo
de explosión o incendio. Por favor consulte el manual del usuario para las
especificaciones del adaptador de alimentación.
警告！只能使用經過認證、適用於本系統的電源變壓器與電源線。使用不適用的電
源變壓器將可能導致火災或爆炸。電源變壓器規格請參考使用手冊。
警告！只能使用经过认证，适用于本系统的电源适配器与电源线。使用不适用的电
源适配器将可能导致火灾或爆炸。电源适配器规格请参考使用手册。
Warning! Ultimate disposal of this product should be handled according to all
national laws and regulations.
Vorsicht! Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und
Gesetzen des Landes erfolgen.
Attention! La mise au rebut ou le recyclage de ce produit sont généralement
soumis aux lois et/ou directives de respect de l'environnement. Renseignez-vous
auprès de l'organisme compétent.
Avvertenza! Lo smaltimento di questo prodotto deve essere eseguito secondo le
leggi e i regolamenti locali.
Atención! La disposición final de residuos de este producto se debe cumplir con
las normativas y leyes del país.
警告！本產品的廢棄處理應根據該國家的法律和規章進行。
警告！本产品的废弃处理应根据该国家的法律和规章进行。

KINO-DCM236 Industrial Motherboard
Page V
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.

KINO-DCM236 Industrial Motherboard
Page VI
Manual Conventions
WARNING
Warnings appear where overlooked details may cause damage to the
equipment or result in personal injury. Warnings should be taken
seriously.
CAUTION
Cautionary messages should be heeded to help reduce the chance of
losing data or damaging the product.
NOTE
These messages inform the reader of essential but non-critical
information. These messages should be read carefully as any directions
or instructions contained therein can help avoid making mistakes.
HOT SURFACE
This symbol indicates a hot surface that should not be touched without
taking care.

KINO-DCM236 Industrial Motherboard
Page VII
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 INTRODUCTION........................................................................................................... 2
1.2 MODEL VARIATIONS ................................................................................................... 3
1.3 FEATURES................................................................................................................... 3
1.4 CONNECTORS ............................................................................................................. 4
1.5 DIMENSIONS............................................................................................................... 5
1.6 DATA FLOW................................................................................................................ 7
1.7 TECHNICAL SPECIFICATIONS ...................................................................................... 8
2 UNPACKING................................................................................................................11
2.1ANTI-STATIC PRECAUTIONS...................................................................................... 12
2.2 UNPACKING PRECAUTIONS....................................................................................... 12
2.3 PACKING LIST........................................................................................................... 13
2.4 OPTIONAL ITEMS...................................................................................................... 14
3 CONNECTORS ........................................................................................................... 15
3.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 16
3.1.1 KINO-DCM236 Layout.................................................................................... 16
3.1.2 Peripheral Interface Connectors ..................................................................... 17
3.1.3 External Interface Panel Connectors............................................................... 18
3.2 INTERNAL PERIPHERAL CONNECTORS...................................................................... 19
3.2.1 ATX Power Connector ..................................................................................... 19
3.2.2 Audio Connector .............................................................................................. 20
3.2.3 Battery Connector............................................................................................ 21
3.2.4 Chassis Intrusion Connector............................................................................ 22
3.2.5 Digital I/O Connector...................................................................................... 23
3.2.6 Fan Connectors................................................................................................ 24
3.2.7 Front Panel Connector .................................................................................... 25
3.2.8 I2C Connector .................................................................................................. 26
3.2.9 Keyboard/Mouse Connector ............................................................................ 27
3.2.10 LAN LED Connectors.................................................................................... 28

KINO-DCM236 Industrial Motherboard
Page VIII
3.2.11 LVDS Connector............................................................................................. 29
3.2.12 LVDS Backlight Connector............................................................................ 30
3.2.13 M.2 Module Slot............................................................................................. 31
3.2.14 PCI Express x16 Slot...................................................................................... 33
3.2.15 PCIe Mini Card Slot, Full-size ...................................................................... 33
3.2.16 PCIe Mini Card Slot, Half-size...................................................................... 35
3.2.17 Power Button ................................................................................................. 37
3.2.18 RS-232 Serial Port Connectors...................................................................... 37
3.2.19 RS-232/422/485 Serial Port Connectors ....................................................... 38
3.2.20 SATA 6Gb/s Drive Connectors....................................................................... 40
3.2.21 SATA Power Connectors................................................................................ 41
3.2.22 SMBus Connector .......................................................................................... 42
3.2.23 SPI Flash Connector, BIOS............................................................................ 43
3.2.24 SPI Flash Connector, EC............................................................................... 44
3.2.25 USB 2.0 Connectors....................................................................................... 45
3.3 EXTERNAL INTERFACE CONNECTORS....................................................................... 46
3.3.1 Audio Connector .............................................................................................. 46
3.3.2 Ethernet and USB 3.0 Connectors................................................................... 47
3.3.3 HDMI Connectors............................................................................................ 48
3.3.4 Power Connector (12 V, Power Adapter) ........................................................ 49
3.3.5 Serial Port Connector (COM1) ....................................................................... 50
4 INSTALLATION ......................................................................................................... 51
4.1ANTI-STATIC PRECAUTIONS...................................................................................... 52
4.2 INSTALLATION CONSIDERATIONS.............................................................................. 52
4.3 SO-DIMM INSTALLATION ....................................................................................... 54
4.4 M.2 MODULE INSTALLATION.................................................................................... 55
4.5 FULL-SIZE PCIE MINI CARD INSTALLATION............................................................. 56
4.6 HALF-SIZE PCIE MINI CARD INSTALLATION............................................................. 57
4.7 SYSTEM CONFIGURATION......................................................................................... 59
4.7.1 AT/ATX Mode Select Switch............................................................................. 59
4.7.2 Clear CMOS Button......................................................................................... 60
4.7.3 Flash Descriptor Security Override Jumper.................................................... 61
4.7.4 LVDS Resolution Selection .............................................................................. 62
4.7.5 LVDS Backlight Mode Selection...................................................................... 63

KINO-DCM236 Industrial Motherboard
Page IX
4.7.6 LVDS Voltage Selection.................................................................................... 63
4.7.7 USB Power Selection....................................................................................... 64
4.8 CHASSIS INSTALLATION............................................................................................ 65
4.8.1 Airflow.............................................................................................................. 65
4.8.2 Motherboard Installation................................................................................. 65
4.9 INTERNAL PERIPHERAL DEVICE CONNECTIONS........................................................ 65
4.9.1 SATA Drive Connection ................................................................................... 65
4.10 INTEL®AMTSETUP PROCEDURE........................................................................... 67
4.11 WINDOWS 7INSTALLATION–USB 3.0 CREATOR UTILITY....................................... 68
5 BIOS.............................................................................................................................. 69
5.1 INTRODUCTION......................................................................................................... 70
5.1.1 Starting Setup................................................................................................... 70
5.1.2 Using Setup...................................................................................................... 70
5.1.3 Getting Help..................................................................................................... 71
5.1.4 Unable to Reboot after Configuration Changes.............................................. 71
5.1.5 BIOS Menu Bar................................................................................................ 71
5.2 MAIN........................................................................................................................ 72
5.3ADVANCED............................................................................................................... 73
5.3.1 ACPI Settings................................................................................................... 74
5.3.2 AMT Configuration.......................................................................................... 75
5.3.3 Super IO Configuration ................................................................................... 76
5.3.3.1 Serial Port n Configuration....................................................................... 77
5.3.3.1.1 Serial Port 1 Configuration................................................................ 77
5.3.3.1.2 Serial Port 2 Configuration................................................................ 78
5.3.3.1.3 Serial Port 3 Configuration................................................................ 79
5.3.3.1.4 Serial Port 4 Configuration................................................................ 80
5.3.3.1.5 Serial Port 5 Configuration................................................................ 81
5.3.3.1.6 Serial Port 6 Configuration................................................................ 82
5.3.4 iWDD H/W Monitor......................................................................................... 83
5.3.4.1 Smart Fan Mode Configuration................................................................ 85
5.3.5 RTC Wake Settings........................................................................................... 88
5.3.6 Serial Port Console Redirection ...................................................................... 89
5.3.6.1 Legacy Console Redirection Settings....................................................... 90
5.3.6.2 Console Redirection Settings.................................................................... 91

KINO-DCM236 Industrial Motherboard
Page X
5.3.7 CPU Configuration.......................................................................................... 93
5.3.8 SATA Configuration ......................................................................................... 95
5.3.9 NVMe Configuration........................................................................................ 96
5.3.10 USB Configuration......................................................................................... 97
5.3.11 IEI Feature..................................................................................................... 98
5.4 CHIPSET ................................................................................................................... 99
5.4.1 System Agent (SA) Configuration .................................................................... 99
5.4.1.1 Graphics Configuration........................................................................... 100
5.4.1.1.1 LCD Control .................................................................................... 103
5.4.1.2 PEG Port Configuration.......................................................................... 104
5.4.1.3 Memory Configuration ........................................................................... 105
5.4.2 PCH-IO Configuration .................................................................................. 106
5.4.2.1 PCI Express Configuration..................................................................... 108
5.4.2.2 HD Audio Configuration......................................................................... 109
5.5 SECURITY................................................................................................................110
5.6 BOOT.......................................................................................................................111
5.7 SAVE &EXIT...........................................................................................................113
6 SOFTWARE DRIVERS.............................................................................................115
6.1 SOFTWARE INSTALLATION .......................................................................................116
6.2AVAILABLE SOFTWARE DRIVERS .............................................................................117
A REGULATORY COMPLIANCE.............................................................................118
B PRODUCT DISPOSAL............................................................................................ 120
C BIOS MENU OPTIONS........................................................................................... 122
D TERMINOLOGY ..................................................................................................... 126
E DIGITAL I/O INTERFACE..................................................................................... 131
F WATCHDOG TIMER............................................................................................... 134
G HAZARDOUS MATERIALS DISCLOSURE....................................................... 137

KINO-DCM236 Industrial Motherboard
Page XI
List of Figures
Figure 1-1: KINO-DCM236 Industrial Motherboard .....................................................................2
Figure 1-2: Connectors ..................................................................................................................4
Figure 1-3: Dimensions (mm)........................................................................................................5
Figure 1-4: KINO-DCM236 Height Dimensions 1 (mm)...............................................................6
Figure 1-5: KINO-DCM236 Height Dimensions 2 (mm)...............................................................6
Figure 1-6: Data Flow Diagram......................................................................................................7
Figure 3-1: Connector and Jumper Locations (Front Side) .....................................................16
Figure 3-2: +12V DC-IN Power Connector Location..................................................................19
Figure 3-3: Audio Connector Location.......................................................................................20
Figure 3-4: Battery Connector Location.....................................................................................21
Figure 3-5: Chassis Intrusion Connector Location...................................................................22
Figure 3-6: Digital I/O Connector Location ................................................................................23
Figure 3-7: Fan Connector Locations.........................................................................................24
Figure 3-8: Front Panel Connector Location .............................................................................25
Figure 3-9: I2C Connector Location ............................................................................................26
Figure 3-10: Keyboard/Mouse Connector Location..................................................................27
Figure 3-11: LAN LED Connector Locations .............................................................................28
Figure 3-12: LVDS Connector Location......................................................................................29
Figure 3-13: LVDS Backlight Inverter Connector......................................................................30
Figure 3-14: M.2 Slot Location ....................................................................................................31
Figure 3-15: PCIe x16 Slot Location ...........................................................................................33
Figure 3-16: Full-size PCIe Mini Card Slot Location .................................................................34
Figure 3-17: Half-size PCIe Mini Card Slot Location.................................................................35
Figure 3-18: Power Button Location...........................................................................................37
Figure 3-19: RS-232 Connector Locations.................................................................................38
Figure 3-20: RS-232/422/485 Connector Locations...................................................................39
Figure 3-21: SATA 6Gb/s Drive Connector Locations..............................................................40
Figure 3-22: SATA Power Connector Locations .......................................................................41
Figure 3-23: SMBus Connector Location...................................................................................42
Figure 3-24: SPI Flash Connector Location...............................................................................43
Figure 3-25: SPI Flash Connector Location...............................................................................44

KINO-DCM236 Industrial Motherboard
Page XII
Figure 3-26: USB Connector Locations......................................................................................45
Figure 3-27: External Interface Connectors...............................................................................46
Figure 3-28: Audio Jacks.............................................................................................................46
Figure 3-29: Ethernet Connector.................................................................................................47
Figure 3-30: HDMI Connector......................................................................................................49
Figure 3-31: 4-pin Power Mini-DIN Connection .........................................................................49
Figure 3-32: Serial Port Pinouts..................................................................................................50
Figure 4-1: SO-DIMM Installation................................................................................................54
Figure 4-2: Inserting the M.2 Module into the Slot at an Angle ...............................................55
Figure 4-3: Securing the M.2 Module..........................................................................................55
Figure 4-4: Removing the Retention Screw...............................................................................56
Figure 4-5: Inserting the Full-size PCIe Mini Card into the Slot at an Angle..........................56
Figure 4-6: Securing the Full-size PCIe Mini Card ....................................................................57
Figure 4-7: Removing Retention Screw .....................................................................................57
Figure 4-8: Inserting the Half-size PCIe Mini Card into the Slot at an Angle..........................58
Figure 4-9: Securing the Half-size PCIe Mini Card....................................................................58
Figure 4-10: AT/ATX Mode Select Switch Location ..................................................................59
Figure 4-11: Clear CMOS Button Location.................................................................................60
Figure 4-12: Flash Descriptor Security Override Jumper Location ........................................61
Figure 4-13: LVDS Resolution Selection Jumper Location......................................................62
Figure 4-14: LVDS Backlight Mode Select Jumper Location...................................................63
Figure 4-15: LVDS Voltage Jumper Location ............................................................................64
Figure 4-16: SATA Drive Cable Connection...............................................................................66

KINO-DCM236 Industrial Motherboard
Page XIII
List of Tables
Table 1-1: Model Variations...........................................................................................................3
Table 1-2: Technical Specifications............................................................................................10
Table 3-1: Peripheral Interface Connectors...............................................................................18
Table 3-2: Rear Panel Connectors..............................................................................................18
Table 3-3: +12V DC-IN Power Connector Pinouts.....................................................................19
Table 3-4: Audio Connector Pinouts ..........................................................................................20
Table 3-5: Battery Connector Pinouts........................................................................................21
Table 3-6: Chassis Intrusion Connector Pinouts......................................................................22
Table 3-7: Digital I/O Connector Pinouts....................................................................................23
Table 3-8: Fan Connector Pinouts..............................................................................................24
Table 3-9: Front Panel Connector Pinouts.................................................................................25
Table 3-10: I2C Connector Pinouts..............................................................................................26
Table 3-11: Keyboard/Mouse Connector Pinouts .....................................................................27
Table 3-12: LAN LED Connector Pinouts...................................................................................28
Table 3-13: LVDS Connector Pinouts.........................................................................................30
Table 3-14: Backlight Inverter Connector Pinouts....................................................................30
Table 3-15: M.2 Slot Pinouts........................................................................................................32
Table 3-16: Full-size PCIe Mini Card Slot Pinouts.....................................................................35
Table 3-17: Half-size PCIe Mini Card Slot Pinouts ....................................................................36
Table 3-18: RS-232 Connector Pinouts ......................................................................................38
Table 3-19: RS-232/422/485 Connector Pinouts........................................................................39
Table 3-20: RS-232/422/485 DB-9 Serial Port Pinouts...............................................................39
Table 3-21: SATA Power Connector Pinouts.............................................................................41
Table 3-22: SMBus Connector Pinouts ......................................................................................42
Table 3-23: SPI Flash Connector Pinouts ..................................................................................43
Table 3-24: SPI Flash Connector Pinouts ..................................................................................44
Table 3-25: USB Connector Pinouts...........................................................................................45
Table 3-26: LAN1 Pinouts ............................................................................................................47
Table 3-27: Connector LEDs........................................................................................................47
Table 3-28: External USB 3.0 Port Pinouts ................................................................................48
Table 3-29: HDMI Connector Pinouts .........................................................................................49

KINO-DCM236 Industrial Motherboard
Page XIV
Table 3-30: Serial Port Pinouts....................................................................................................50
Table 4-1: AT/ATX Mode Select Switch Settings.......................................................................59
Table 4-2: Flash Descriptor Security Override Jumper Settings.............................................61
Table 4-3: LVDS Resolution Selection Jumper Settings..........................................................62
Table 4-4: LVDS Backlight Mode Select Jumper Settings........................................................63
Table 4-5: LVDS Voltage Jumper Settings.................................................................................63
Table 4-6: BIOS Options and Configured USB Ports................................................................64
Table 4-7: USB Power Source Setup..........................................................................................64
Table 5-1: BIOS Options and Configured USB Ports............................................................. 107

KINO-DCM236 Industrial Motherboard
Page XV
List of BIOS Menus
BIOS Menu 1: Main.......................................................................................................................72
BIOS Menu 2: Advanced..............................................................................................................73
BIOS Menu 3: ACPI Settings .......................................................................................................74
BIOS Menu 4: AMT Configuration...............................................................................................75
BIOS Menu 5: Super IO Configuration........................................................................................76
BIOS Menu 6: Serial Port n Configuration .................................................................................77
BIOS Menu 7: iWDD H/W Monitor ...............................................................................................83
BIOS Menu 8: Smart Fan Mode Configuration ..........................................................................85
BIOS Menu 9: RTC Wake Settings..............................................................................................88
BIOS Menu 10: Serial Port Console Redirection.......................................................................89
BIOS Menu 11: Legacy Console Redirection Settings .............................................................90
BIOS Menu 12: Console Redirection Settings...........................................................................91
BIOS Menu 13: CPU Configuration.............................................................................................93
BIOS Menu 14: SATA Configuration...........................................................................................95
BIOS Menu 15: NVMe Configuration...........................................................................................96
BIOS Menu 16: USB Configuration.............................................................................................97
BIOS Menu 17: IEI Feature...........................................................................................................98
BIOS Menu 18: Chipset................................................................................................................99
BIOS Menu 19: System Agent (SA) Configuration....................................................................99
BIOS Menu 20: Graphics Configuration.................................................................................. 100
BIOS Menu 21: LCD Control..................................................................................................... 103
BIOS Menu 22: PEG Port Configuration.................................................................................. 104
BIOS Menu 23: Memory Configuration.................................................................................... 105
BIOS Menu 24: PCH-IO Configuration..................................................................................... 106
BIOS Menu 25: PCI Express Configuration ............................................................................ 108
BIOS Menu 26: HD Audio Configuration................................................................................. 109
BIOS Menu 27: Security............................................................................................................ 110
BIOS Menu 28: Boot.................................................................................................................. 111
BIOS Menu 29: Exit.................................................................................................................... 113

KINO-DCM236 Industrial Motherboard
Page 1
Chapter
1
1 Introduction

KINO-DCM236 Industrial Motherboard
Page 2
1.1 Introduction
Figure 1-1: KINO-DCM236 Industrial Motherboard
The KINO-DCM236 series is a Mini-ITX form factor industrial motherboard with 6th
generation Intel®Xeon®E3 v5, Core™ i3 or Celeron®processor. It also equipped with two
260-pin 2133 MHz dual-channel DDR4 SDRAM SO-DIMM slots supporting ECC and up to
64 GB of memory.
The KINO-DCM236 series includes an HDMI 2.0 port, two HDMI 1.4 ports and a LVDS
connector for triple independent display.
Expansions include one full-size PCIe Mini slot supporting mSATA modules, one half-size
PCIe Mini slot, one M.2 A-key slot and one PCIe x16 slot. I/O include four USB 3.0
connectors on the rear panel plus two internal USB 2.0 connectors supporting four
USB 2.0 devices, and four SATA 6Gb/s connectors. Serial device connectivity is provided
by one external RS-232 port, three internal RS-232 connectors and two internal
RS-232/422/485 connectors. Two RJ-45 GbE connectors provide the system with smooth
connections to an external LAN.

KINO-DCM236 Industrial Motherboard
Page 3
1.2 Model Variations
There are four models of the KINO-DCM236 series. The model variations are listed in
Table 1-1.
On-board Processor
Model Name Speed Cache Max TDP
KINO-DCM236-E3 Intel®Xeon®processor E3-1505M v5 2.8 GHz 8 MB 45 W
KINO-DCM236-E3E Intel®Xeon®processor E3-1505L v5 2.0 GHz 8 MB 25 W
KINO-DCM236-i3E* Intel®Core™ i3-6102E processor 1.9 GHz 3 MB 25 W
KINO-DCM236-CE* Intel®Celeron®processor G3902E 1.6 GHz 2 MB 25 W
* By order production, MOQ: 100
Table 1-1: Model Variations
1.3 Features
Some of the KINO-DCM236 motherboard features are listed below:
Mini-ITX motherboard supports 6th generation Intel®Xeon®E3 v5, Core™ i3
or Celeron®processor
Two 2133 MHz DDR4 SO-DIMM slots support ECC and up to 64 GB of
memory
Triple independent display via HDMI 2.0, HDMI 1.4 and LVDS interface
Supports HDMI 2.0 (4096x2160 @ 60 Hz)
Dual Intel®GbE port supporting Intel®AMT 11.0
Supports M.2 2230 modules withA-key edge connector
One full-size PCIe Mini card slot supports mSATA module
PCIe x16 slot for expansion
Four SATA6Gb/s connectors with 5V power output
Four USB 3.0 external connectors
Four RS-232 connectors and two RS-232/422/485 connectors
IEI One Key Recovery solution allows you to create rapid OS backup and
recovery

KINO-DCM236 Industrial Motherboard
Page 4
1.4 Connectors
The connectors on the KINO-DCM236 are shown in the figures below.
Figure 1-2: Connectors