IEI Technology KINO-G45A User manual

1
Mini-ITX SBC with Socket LGA775 for Intel® 45nm Core™ 2
Duo/Quad CPU with FSB 1333MHz, VGA/DVI/HDMI, PCIe GbE,
USB2.0, SATAII and Audio
KINO-G45A
Quick Installation Guide
Version 1.00
Sep. 14, 2009
Package Contents
KINO-G45Apackage includes the following items
z1 x KINO-G45A Single Board Computer
z1 x Dual Ports USB cable with bracket
z6 x SATA cable
z1 x I/O shielding
z1 x Mini Jumper Pack
z1 x Utility CD
z1 x QIG(Quick Installation Guide)
©2006 Copyright by IEI Technology corp.
All rights reserved.

2
Specifications
zCPU : Support Intel® Core™2 Duo/Quad/Extreme processor with
800/1066/1333MHz
zSystem Chipset : Intel ® G45 + ICH10DO
zBIOS : AMI BIOS
zSystem Memory : Two 240-pin 2G(max.) 667/800MHz DDR2
dual-channel SDRAM DIMMs supported (system max. 4GB)
zEthernet : Realtek RTL8111CP PCIe GbE Controller
zI/O Interface :
1 x RS-232
6 x USB 2.0 (4 on bracket, 2 on board by pin header)
6 x SATA II
2 x PS/2 for KB/MS
zDisplay Interface :
VGA integrated in the Intel®G45 support up to QXGA
Support HDMI Integrated in the Intel® G45
DVI-D output support
zExpansions :
1 x PCI Slot
zSPDIF:
1 x 5-pin header
zDigital I/O :
8-bit digital I/O, 4-bit input/4-bit output
zSuper IO : ITE IT8718F
zAudio : Realtek ALC888 HD Audio codec
zFAN:
1 x 4 pin CPU FAN
1 x 3 pin Sys FAN
zWatchdog Timer :

3
Software Programmable support 1~255 sec. System reset
zPower Supply : ATX Power, AT/ATX mode supported
zPower Consumption :
3.3V @ 0.38A, 5V@ 6.99A, 12V@ 3.54A(Intel® Core™2 Duo E8500
3.16GHz,DDR2 800MHz 2GB x 2, 3D Mark 2001SE)
zOperation Temperature : 0°C ~ 60°C (32°F ~ 140°F)
zOperation Humidity : 5% ~95% non-condensing
zDimensions : 170mm x 170mm
zWeight : GW: 1100g / NW: 390 g
Ordering Information
KINO-G45A-R10 :
Mini-ITX SBC with Socket LGA775 for Intel® 45nm Core™ 2 Duo/
Quad CPU with FSB 1333MHz, VGA/DVI/HDMI, PCIe GbE, USB2.0,
SATAII and Audio
32100-088600-RS/32100-088600-RS/32102-000100-200-RS :
SATA Power cable
SAIDE-KIT01-R10 : SATA to IDE/CF Converter board
CF-520-RS: CPU Cooler (115mm x 115mm x 67mm, 115W)
CF-775A-RS: CPU Cooler (92mm x 92mm x 73mm, 130W)

4
Jumpers setting and Connectors
LABEL FUNCTION
J_CMOS1 Clear CMOS jumper
JAUTO1 Auto Power Button setting jumper
KB_MS1 PS/2 MOUSE & KEYBOARD Connectors
LAN1_USB01 RJ45 LAN & USB Connector
USB_C23 USB Port Connector
HDMI1 HDMI Connector
COM1 External Serial Port DB-9 Connector
VIDEO1 VGA plus DVI-D ports Connector
JSPI1 Flash BIOS SPI ROM connector
SPDIF1 Internal SPDIF connector
USB45 Internal USB connector
SATA1
SATA2
SATA3
SATA4
SATA5
SATA6
Serial ATA Connectors
CPU_FAN1 CPU Fan Connector
SYS_FAN1 System FAN connector
DIO1 Digital Input/Output Connector
AUDIO_CV1 Audio Input and Output Connector
F_PANEL1 PWR、RST Buttons and Indicators
CPU12V2 CPU +12V Power Input Connector
ATX20 20-pin ATX Power Input Connector
BAT1 Battery connector
DIMM1
DIMM2 DDR2 Slots
PCI1 PCI Slot

5
J_CMOS1: Clear CMOS Jump
J_CMOS1 DESCRIPTION
1-2
(default) Normal Operation
2-3 Clear CMOS Setup
JAUTO1 : AT/ATX mode switch
JAUTO1 DESCRIPTION
OPEN
(default) ATX
SHORT AT
USB45: Internal USB Connector
PIN DESCRIPTION PIN DESCRIPTION
1 VCC(+5V) 2 GND
3 DATA- 4 DATA+
5 DATA+ 6 DATA-
7 GND 8 VCC(+5V)
JSPI1:Flash BIOS SPI ROM Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +3.3V 5 GND
2 CS0# 6 CLK
3 SO0 7 SI
4 N/C 8 N/C

6
ATX20:
20-Pin ATX Power Input Connector
PIN DESCRIPTION PIN DESCRIPTION
1 NC (+3.3V) 11 NC (+3.3V)
2 NC (+3.3V) 12 -12Vdc
3 GND 13 GND
4 +5Vdc 14 PS-ON
5 GND 15 GND
6 +5Vdc 16 GND
7 GND 17 GND
8 PWR-OK 18 NC (-5V)
9 +5VSby 19 +5Vdc
10 +12Vdc 20 +5Vdc
F_PANEL1 :
PWR、RST Buttons and Indicators
Function PIN DESCRIPTION
1NC
2PWR_BTN+
PWR_BTN 3PWR_BTN-
4 HDD_LED+
HDD_LED 5HDD_LED-
6 PWR_LED+
7 PWR_LED+
PWR_LED 8PWR_LED-
9 RESET+
RESET 10 RESET-

7
CPU12V2:CPU +12V Power Input Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 GND
3 +12V 4 +12V
SPDIF1 :
SPDIF Connector
PIN . DESCRIPTION
1 VCC +5V
2 NC (Key)
3 SPDIF_OUT
4 GND
5 SPDIF_IN
DIO1 : Digital Input / Output Connector
PIN DESCRIPTION PIN DESCRIPTION
1 GND 2 +5V
3 Output 3 4 Output 2
5 Output 1 6 Output 0
7 Input 3 8 Input 2
9 Input 1 10 Input 0
CPU_FAN1:
CPU FAN Connector
PIN DESCRIPTION
1 GND
2 +12V
3 Rotation Signal
4 Control
SYS_FAN1:
System FAN Connector
PIN DESCRIPTION
1 GND
2 +12V
3 Rotation Signal
BAT1 :
Battery Connector
PIN DESCRIPTION
1 BAT+ (+3.3V)
2 BAT- (GND)

8
Board Layout: Connector Locations