IEI Technology NANO-HM551-R10 User manual

1
EPIC SBC supports Socket G1 for Intel® mobile Core™ i7/ i5/ i3 and
Celeron® processor VGA/HDMI/LVDS, Dual PCIe GbE, USB2.0, Mini
PCIe, SATAII and Audio
NANO-HM551-R10
Quick Installation Guide
Version 1.0
Oct. 14th, 2010
Package Contents
NANO-HM551 package includes the following items:
1 x NANO-HM551-R10 Single Board Computer
1 x SATA cable with power
2 x RS-232 cable
1 x Audio cable
1 x Mini Jumper Pack
1 x Utility CD
1 x One Key Recovery CD
1 x QIG (Quick Installation Guide)
©2006 Copyright by IEI Technology corp.
All rights reserved.

2
Specifications
CPU: Socket G1 for Intel® mobile Core™ i7/ i5/ i3 and Celeron®
processor (Socket 988)
PCH: Intel® HM55
BIOS: UEFI BIOS
System memory: One 204-pin 800/1066MHz DDR3 SDRAM
SO-DIMM up to 4GB
Ethernet: Dual PCIe LAN controller by Realtek RTL8111E with ASF
2.0 support
I/O Interface:
2 x SATAII with SATA power connector
8 x USB 2.0
3 x RS-232
1 x RS-232/422/485 with Auto Flow control
1 x TTL COM
1 x 6-pin pin header for KB/MS
Expansions:
1 x Mini PCIe card slot (PCIe + USB + SATA signal) support IEI mini
DOM
Audio: Realtek ALC888 HD Codec
Digital I/O: 8-bit digital I/O, 4-bit input/ 4-bit output by super I/O
Super I/O: FINTEK F81865F
Display Interface:
Analog CRT by VGA connector (2048x1536)
18/24-bit dual-channel LVDS (1600x1200)
HDMI supports up to 1080p resolution (1920x1080)
TPM
2 x 10-pin header
Watchdog timer:
Software programmable supports 1~255 sec. system reset
Power Supply: +12V only, AT/ATX support
Power Consumption:
4.35A@12V (Intel® Core i3 330M 2.13GHz CPU with DDR3
1066MHz 1GB)

3
Humidity: Operation: 5% ~ 95%, non-condensing
Temperature: -10 ~ 60C
Dimension: 115 mm x 165 mm
Weight: GW: 850g; NW: 350g
Ordering Information
NANO-HM551-R10:
EPIC SBC supports Socket G1 for Intel® Core™ i7 CPU, VGA/HDMI, Dual
PCIe GbE, USB 2.0, Mini PCIe, SATA II and Audio, RoHS
32000-070301-RS: Dual Ports USB Cable
32100-043403-RS: ATX power cable
CF-989A-RS-R11:CPU cooler for mobile socket-G (PGA988) up to 55W
processor, Copper, 60x60x27.6mm ,RoHS
CF-989B-RS: CPU cooler for mobile socket-G (PGA988) 50W, processor,
Aluminum,60x60x27.6mm, RoHS
32000-023800-RS: KB/MS cable
TPM-IN01-R11: 20-pin INFINEON TPM Module, S/W management
Tool, Firmware V3.17
Jumpers setting
LABEL FUNCTION
J_CMOS1 CMOS state setting
JP1 ME Flash Descriptor Security Override
ME_RTC Clear CMOS
J_ATXCTL1 ATX/AT Mode Selection
J_AUTOPOWER1 At ato power button
J_LVDS LVDS VOLTAGE Selection
JP2 Rs232/422 or RS484 Selection
J_CMOS1: Clear CMOS Setup
J_CMOS1 DESCRIPTION
Short 1-2 Keep CMOS Setup(default)
Short 2-3 Clear CMOS Setup

4
JP1: ME Flash Descriptor Security Override
JP1 DESCRIPTION
Open ME Flash Enable
Short ME Flash Disable
ME_RTC1: Clear ME Setup
ME_RTC1 DESCRIPTION
1-2 Normal Operation
2-3 Clear ME Setup
J_ATXCTL1: ATX/AT MODE
PIN NO DESCRIPTION
1-2 ATX MODE
2-3 AT MODE(Default)
J_AUTOPWR1: AT Auto Button
J_AUTOPWR1 DESCRIPTION
open ATX Mode
short AT Mode(Default)
LVDS LCD Voltage Select
J_VLVDS1 DESCRIPTION
1-2 3.3V(Default)
3-4 5V
5-6 12V
RS232/RS422 or RS485 Type Selec
J1 DESCRIPTION
1-2 RS232(default)
2-3 RS422 or RS485

5
Table of Connectors
LABEL FUNCTION
KB_MS1 PS/2 MOUSE & KEYBOARD Connectors
COM1,2,4, COM 9pin Female Connector
COM5 TTL COM Port by pin header
VGA1 VGA 15-pin Female Connector
LAN1
LAN2 RJ45 LAN Connectors
USB01
USB23 External 4 Port USB Connectors
AUDIO1 Audio Connector
PWR2 Power input connector
ATX1 Internal 4 Port USB Connectors
COM3 Internal Serial Port Connectors (RS-232/422/485)
CPU_FAN1 CPU Fan Connector
SYS_FAN1 System Fan Connector
USB45
USB67 Internal 4 pin header Connectors
F_PANEL1 PWR & RST Buttons and Indicators panel
JSPI1 SPI flash connector
DIO1 Digital I/O Connector
SATA1~4 Serial ATA Connectors
BAT1 BIOS battery Connector
Mini_PCIe1 PCIe mini card slot
TPM1 TPM header
DIMM1 204pin DDR3 Female slots
KB_MS1: 6-pin Mini-DIN Keyboard Connector
PIN NO. DESCRIPTION
1 VCC (+5V)
2 Mouse Data
3 Mouse Clock
4 Keyboard Data
5 Keyboard Clock
6 Keyboard GND

6
COM1,2,4: Internal Serial Port by Pin Header (RS-232)
PIN NO. DESCRIPTION
1 DATA CARRIER DETECT (DCD)#
2 DATASETREADY (DSR)#
3 RECEIVEDATA (RXD)
4 REQUESTTOSEND (RTS)#
5 TRANSMITDATA (TXD)
6 CLEAR TO SEND (CTS)#
7 DATA TERMINAL READY (DTR)#
8 RING INDICATOR (RI)#
9 GND (GND)
COM5: Internal Serial Port with TTL
PIN NO. DESCRIPTION
1 DATA CARRIER DETECT (DCD)#
2 DATASETREADY (DSR)#
3 RECEIVEDATA (RXD)
4 REQUESTTOSEND (RTS)#
5 TRANSMITDATA (TXD)
6 CLEAR TO SEND (CTS)#
7 DATA TERMINAL READY (DTR)#
8 RING INDICATOR (RI)#
9 GND (GND)
COM3:Serial port connector.(PINHEADER2*7,14PIN,P:2.0MM)
PIN NO DESCRIPTION PIN NO DESCRIPTION
1 DCD2 2 DSR2
3 RXD2 4 RTS2
5 TXD2 6 CTS2
7 DTR2 8 RI2
9 GND 10 N/A
11 RS422 TX2/485 12 RS422 TX2-/485
13 RS422 RX2 14 RS422 RX2-
BAT1 : (WAFER 1*2PIN,2PIN,180D,P:1.25MM)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VBATT 2 GND

7
VGA1: 15-pin Female Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 RED 2 GREEN
3 BLUE 4 NC
5 GND 6 GND
7 GND 8 GND
9 VCC 10 Display_GND
11 NC 12 DDCDAT
13 HSYNC 14 VSYNC
15 DDCCLK
LAN1,LAN2: RJ45 LAN Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 MDI0+ 5 MDI1-
2 MDI0- 6 VDD10
3 VDD10 7 MDI2+
4 MDI1+ 8 MDI2-
USB0_1,USB2_3: USB Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC (+5V) 5 VCC (+5V)
2 DATA- 6 DATA-
3 DATA+ 7 DATA+
4 GROUND 8 GROUND
AUDIO1: Audio Source Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 LINEOUT-R 2 LINEIN-R
3 GND 4 MIC1
5 LINEOUT-L 6 LINEIN-L
7 GND 8 GND
9 MIC-R 10 MIC-L

8
PWR2: Power input connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 GND
3 VCC12V IN 4 VCC12V IN
TPM Connector : TPM1(20PIN_connector)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 TPMCLK 2 GND
3 LPC_FRAME# 4 NC
5 LRESET# 6 VCC5S
7 LPC_AD3 8 LPC_AD2
9 VCC3S 10 LPC_AD1
11 LPC_AD0 12 GND
13 SMBCLK 14 SMBDATA
15 VCC3DUAL 16 SERIRQ
17 GND 18 NC
19 VCC3S 20 LDRQ#
F_PANEL1 : PWR & RST Buttons and Indicators panel
PIN DESCRIPTION PIN DESCRIPTION
1 PWRBTSW- 2 PWRLED
3 GND 4 GND
5 SATALEDPWR 6 EXTRST-
7 SATA_LED# 8 GND
SYS_FAN1:3Pin Fan Connector
PIN DESCRIPTION PIN DESCRIPTION
1 NC 2 +12V
3 GND
JSPI1 : SPI FLASH Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +3.3V 2 CS#
3 SO 4 CLK0
5 SI 6 GND

9
CPU_FAN3: 4Pin Fan Connector
PIN DESCRIPTION PIN DESCRIPTION
1 GND 2 12V
3 FAN_IN 4 FANCTL
USB4_5: USB(4~5) Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +5V 2 GND
3 USBP4N 4 USBP5P
5 USBP4P 6 USBP5N
7 GND 8 +5V
USB6_7: USB(6~7) Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +5V 2 GND
3 USBP6N 4 USBP7P
5 USBP6P 6 USBP7N
7 GND 8 +5V
SATA1~2: SATA Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 TXP
3 TXN 4 GND
5 RXN 6 RXP
7 GND
DIO1 : 10-pin Digital I/O Connector.
PIN NO DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 VCC5S
3 OUTPUT3 4 OUTPUT2
5 OUTPUT1 6 OUTPUT0
7 INPUT3 8 INPUT2
9 INPUT1 10 INPUT0
Mini PCIe1: PCIe Mini Card Slot
Pin No Description Pin NO. Description
1 PCIE_WAKE# 2 VCC3
3 N/C 4 GND

10
Mini PCIe1: PCIe Mini Card Slot
Pin No Description Pin NO. Description
5 N/C 6 1.5 V
7 CLKREQ# 8 LFRAME#
9 GND 10 LAD3
11 CLK- 12 LAD2
13 CLK+ 14 LAD1
15 GND 16 LAD0
17 PCIRST# 18 GND
19 LPC 20 VCC3
21 GND 22 PCIRST#
23 PERN2 24 3VDual
25 PERP2 26 GND
27 GND 28 1.5 V
29 GND 30 SMBCLK
31 PETN2 32 SMBDATA
33 PETP2 34 GND
35 GND 36 USBD-
37 GND 38 USBD+
39 VCC3 40 GND
41 VCC3 42 N/C
43 GND 44 RF_LINK#
45 SATATXP2/CL_CLK 46 BLUELED#
47 SATATXN2/CL_DATA 48 1.5 V
49 SATARXN2/CL_RST# 50 GND
51 SATARXP2 52 VCC3

11
LVDS1: LVDS Connector
Pin No. Description Pin No. Description
1 GROUND 2 GROUND
3 LVDSA_Y0+ 4 LVDSA_Y0-
5 LVDSA_Y1+ 6 LVDSA_Y1-
7 LVDSA_Y2+ 8 LVDSA_Y2-
9 LVDSA_CLK+ 10 LVDSA_CLK-
11 LVDSA_Y3+ 12 LVDSA_Y3+
13 GROUND 14 GROUND
15 LVDSB_Y0+ 16 LVDSB_Y0-
17 LVDSB_Y1+ 18 LVDSB_Y1-
19 LVDSB_Y2+ 20 LVDSB_Y2-
21 LVDSB_CLK+ 22 LVDSB_CLK-
23 LVDSB_Y3+ 24 LVDSB_Y3+
25 GROUND 26 GROUND
27 VCC_LVDS 28 VCC_LVDS
29 VCC_LVDS 30 VCC_LVDS

12
Board Layout: Dimensions

13
Board Layout: Jumper and Connector Locations