IEI Technology KINO-QM770 User manual

1
Mini-ITX SBC with Socket G2 for Intel® 22nm Mobile CPU,
DVI-I Dual HDMI LVDS, Dual PCIe GbE, USB 3.0, PCIe Mini, SATA
6Gb s and Audio
KINO-QM770
Quick Installation Guide
Version 1.0
Dec.14, 2015
Package Contents
KINO-QM770 package includes the following items:
1 x KINO-QM770 Single Board Computer
2 x SATA with power output cable
1 x RS-232 cable with bracket
1 x I/O shielding
1 x Mini jumper pack
1 x Utility CD
1 x QIG (Quick Installation Guide)
©2006 Copyright by IEI Integration corp.
All rights reserved.

2
Specifications
CPU: Socket G2 for Intel® 3rd generation 22nm mobile processor
System Chipset: Intel
®
QM77
BIOS: UEFI BIOS
System memory: 2 x 204-pins 1066/1333/1600 MHz DDR3 SDRAM
SO-DIMM supported (system max. 16GB)
Ethernet:
1 x Intel
®
82579 PHY (PCIe x1 interface) with Intel
®
AMT 8.0
supported by iEZman software UI
1 x Intel® 82583V PCIe GbE Controller (PCIe x1 interface)
I/O Interface:
2 x SATA 3Gb/s
2 x SATA 6Gb/s with RAID 0/1/5/10 support
2 x SATA +12V and +5V power output by 4-pin (1x4) wafer-header
4 x USB 2.0 (by pin-header)
4 x USB 3.0 (rear side)
2 x RS-232 (1 on rear side, 1 by pin-header)
1 x RS-422/485 (by 4-pin (1x4) header)
1 x PS/2 KB/MS (by 6-pin (1x6) wafer-header)
SMBus:
1 x 4-pin wafer-header
TPM:
1 x 20-pin (2x10) LPC pin header
Expansion:
1 x PCIe Mini card slot
1 x PCIe x16 slot
Audio: Realtek ALC662 HD Audio codec
Line-out & MIC-in audio jack on rear side
Front Audio by 10-pin (2x5) header
Digital I/O: 8-bit digital I/O, 4-bit input/ 4-bit output by Super I/O
Fintek F81866
Super I/O : Fintek F81866
Display Interface:

3
DVI-I (VGA+DVI) integrated in the Intel® QM77
18/24-bit dual-channel LVDS
Two HDMI by connector on rear side
Watchdog Timer:
Software programmable supports 1~255 sec. system reset
Power Supply:
Single Voltage +12V DC Input, AT/ATX Mode support
1 x External 4-pin DIN main power input DC jack on rear side
1 x Internal 4-pin (2x2) +12V main power input connector
Power Consumption:
[email protected] (2.3GHz Intel® Core™ i7-3610QE with two 1333 MHz
4GB DDR3 memory running 3DMark06 burn in)
Fan: 1 x 4-pin CPU fan connector
1 x 3-pin system fan connector
Operating Humidity: 5% ~ 95%, non-condensing
Operating Temperature: -10 ~ 60°C(14 ~ 140°F)
Dimensions: 170 mm x 170 mm
Weight: GW: 900g; NW: 450g
Ordering Information
KINO-QM770-R10:
Mini-ITX SBC with Socket G2 for Intel® 22nm mobile CPU, DVI-I/dual
HDMI/LVDS, dual PCIe GbE, USB 3.0, PCIe Mini, SATA 6Gb/s and Audio
19800-003100-200-RS:Dual ports USB cable with Bracket
32000-023800-RS:Keyboard/Mouse Y cable
32205-003800-100-RS:RS-422/485 cable with bracket
SACF-KIT01-R10:SATA to CF Converter board
CF-989A-RS-R12: CPU cooler for mobile socket-G (PGA988) up to 55W
processor, copper, 60 x 60 x 27.6mm, RoHS
TPM-IN01-R11: 20-pin Infineon TPM module, software management tool, fi
rmware V3.17
33Z00-000031-RS:DVI-I to VGA adapter connector

4
Jumpers Setting
LABEL
FUNCTION
J_CMOS1 CMOS state setting
ME_RTC1 ME RTC registers
J_ATXCTL1 Select ATX or AT mode
J_VLVDS1 LCD Voltage Selector
J_PID1 LVDS Panel Resolution Selection
J_FLASH1 Flash Descriptor Security Overide
JP1 Display Selection
J_PCIE1 & 2 PCIE Channel Mode Selection(Reserved)
J_CMOS1: Clear CMOS Setup
J_CMOS1 DESCRIPTION
Short
1
-
2
(default)
Keep CMOS Setup
(Normal Operation)
Short 2-3 Clear CMOS Setup
J_VLVDS1
:
LVDS1 Voltage Selection
J
_VLVDS1
DESCRIPTION
Short
1
-
2
(default) +3.3V LVDS
Short
2
-
3
+5V LVDS
J_ATXCTL1
:
AT/ATX Power Mode Setting
J_ATXCTL1
DESCRIPTION
Short 1
-
2
(default) ATX Power Mode
Short 2
-
3
AT
Power Mode
ME_
RTC1
:
Enable i
A
M
T
ME_RTC1
DESCRIPTION
Short
1
-
2
(default)
Save ME RTC registers
(Normal Operation)
Short
2
-
3
Clear ME RTC registers

5
J_PID1: LVDS Panel Resolution
type select Panel Resolution
OFF
640 X 480 (18bit)
1
-
2
800 X 480
(18bit)
3
-
4
1024
X
7
6
8
(18bit)
1
-
2 & 3
-
4 (Default)
1024 X 768 (
24
bit)
5
-
6
1280
X
800
(24bit)
1
-
2 & 5
-
6
1280 X 1024 (48bit)
3
-
4 & 5
-
6
1366 X 768 (24bit)
1
-
2 & 3
-
4 & 5
-
6
1440 X 900 (48bit)
7
-
8
1400 X 1050 (48bit)
1
-
2 & 7
-
8
1600 X
900 (48bit)
3
-
4 & 7
-
8
1600 X 1200 (48bit)
1
-
2 & 3
-
4 & 7
-
8
1680 X 1050 (48bit)
5
-
6 & 7
-
8
1920 X 1080 (48bit)
1
-
2 & 5
-
6 & 7
-
8
1920 X 1200 (48bit)
3
-
4 & 5
-
6 & 7
-
8
2048 X 1536 (48bit)
1
-
2 & 3
-
4 & 5
-
6 & 7
-
8
LVDS disabled
J_FLASH1
:
Flash Descriptor Security
Override
J_FLASH1
DESCRIPTION
1
-
2
(default) Disabled-Default
2
-
3
Enabled
J_ PCIE1 & 2: PCIE Channel Mode Selection
(Reserved)
J_
PCIE
1
J_
PCIE2
DESCRIPTION
Open
Open
x16 (default)
Open
Short
Reserved
Short
Open
x8, x8
Short
Short
x
8,
x
4,
x
4
J
P
1
:
Display Mode Selection
J
P
1
DESCRIPTION
1
-
2
(default) DVI
2
-
3
CRT

6
Table of Connectors
LABEL
FUNCTION
LAN_USB
RJ45
L
AN
and USB 3.0
Connector
USB1,USB2
Internal
USB
2.0
Connector
s
KB_MS1
PS/2 MOUSE & KEYBOARD Connector
VIDEO1
DVI Connector
COM1
External 1 Port
Serial Port
DB
-
9
Connector
s
COM2~3
Internal 2
Serial Port
DB
-
9
Connector
s
FRONT
-
PANEL1
Extend
Audio Module
Connector
AUDIO_CV1
Audio Connector
SPDIF1
SPDIF Connector
S_ATA1~4
Serial ATA Connectors
CN1,CN
2
Serial ATA Power Connectors
IR1
IrDA
Infrared Interface
Connector
CN
5
PCI
-
E Mini Card
INVERTER1
LVDS Panel Voltage Supply
LVDS1
LVDS Panel Connector
SYS_FAN1
System
Fan Connector
CPU_FAN1
CPU
Fan Connector
DIO1
Digital I/O Connector
F_PANEL1
PWR & RST Buttons
and
I
ndicators
PWR1
ADAPTER DC12V POWER IN
PWR2
Power Supply DC12V Power IN
HDMI1,HDMI2
HDMI Connector
TPM1
TPM Connector
CN
3
SMB
us
CONN
ECTOR
BAT1
B
attery connector
JSPI1
Flash SPI ROM
J
SPI2
EC Flash SPI ROM
CN
4
EC Debug port

7
KB_MS1
:
6
-
pin
P
S/2
Keyboard
/Mouse
Connector
PIN NO.
DESCRIPTION
1
VCC (+5V)
2
Mouse Data
3
Mouse Clock
4
Keyboard Data
5
Keyboard Clock
6
GND
USB1, USB2
:
Internal 4 ports USB Connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 VCC (+5V) 2 GND
3 DATA- 4 DATA+
5 DATA+ 6 DATA-
7 GND 8 VCC (+5V)
LAN
1
_USB
1/LAN2_USB2
:
USB3.0 pin define
PIN NO.
DESCRIPTION
1 VBUS
2 D1-
3 D1+
4 GND1
5 STDA_SSRX1_N
6 STDA_SSRX1_P
7 GND_DRAIN
8 STDA_STX1_N
9 STDA_STX1_P
LAN1_USB1/LAN2_USB2: RJ
-
45 LAN pin define
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 MD0+ 5 MD2+
2 MD0- 6 MD2-
3 MD1+ 7 MD3+
4 MD1- 8 MD3-

8
COM2 : Internal Serial Port Connectors (RS-232)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
-
NDCD2
2
-
NDSR2
3
NSIN2
4
-
NRTS2
5
NSOUT2
6 -NCTS2
7
-
NDTR2
8
-
XRI2
9 GND 10 GND
COM1
:
External
Serial
Port
D
-
sub
Connector
(R
S
-
232)
PIN NO.
DESCRIPTION
1
DATA CARRIER DETECT
(DCD
#
)
2
RECEIVE DATA
(RXD)
3
TRANSMIT DATA
(TXD)
4
DATA TERMINAL READY
(DTR
#
)
5
GND
(GND)
6
DATA SET READY (DSR
#
)
7
REQUEST TO SEND (RTS
#
)
8
CLEAR TO SEND (CTS
#
)
9
RING INDICATO
R
(RI
#
)
VIDEO1: DVI-I(Dual Link)+CRT
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
C1
BR
V10
Data 1+
C2
BG
V11
GND
C3
BB
V12
N/C
C4
HS
V13
N/C
C5
GND
V14
+5V Power
C5-1 NC V15 Hot Plug Detect
V1 Data 2- V16 HPDET
V2
Data 2+
V17
Data 0
-
V3
GND
V18
Data 0+
V4
N/C
V19
GND
V5
N/C
V20
N/C
V6
DDC Clock
V21
N/C
V7
DDC Data
V22
N/C
V8
VS
V23
DVI_Clock +
V9
Data 1
-
V24
DVI_Clock
-

9
FRONT
-
PANEL1 :
Audio Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 LMIC2-L 2 ANALOG GND
3 LMIC2-R 4 PRESENCE#
5 LLINE2-R 6 MIC2-JD
7 FRONT-IO 8 NC
9 LLINE2-L 10 LINE2-JD
S_
ATA1 ~
S_
ATA4
:
Serial ATA Connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 GND 5 RX-
2 TX+ 6 RX+
3. TX- 7 GND
4. GND 8 N/C
AUDIO_CV1 :
Audio Line
-
out & MIC
-
in
Connector
PIN NO.
DESCRIPTION
1
Line
-
out (Green)
2
MIC
-
in (Pink)
SPDIF1 :
SPDIF
Connector
PIN NO.
DESCRIPTION
1 +V5S
2 NC
3 SPDIFOUT
4 GND
5 SPDIFIN
COM3 : Internal Serial Port Connectors (RS-422/485)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
R
XD485#
2
RXD485+
3 TXD485+ 4 TXD485#

10
CN1, CN
2
:
Serial ATA Power
Output Connectors
PIN NO.
DESCRIPTION
1
+12V
2
GND
3
GND
4
+5V
CN
5
:
PCIe Mini Card Slot
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
PCIE_WAKE#
2
VCC3
3
N/C
4
GND
5
N/C
6
1.5V
7
CLKREQ#
8
N/C
9
GND
10
N/C
11
CLK
-
12
N/C
13
CLK+
14
N/C
15
GND
16
N/C
17
PCIRST#
18
GND
19
N/C
20
VCC3
21
GND
22
PCIRST#
23
PERN2
24
3VDual
25
PERP2
26
GND
27
GND
28
1.5V
29
GND
30
SMBCLK
31
PETN2
32
SMBDATA
33
PETP2
34
GND
35
GND
36
USBD
-
37
GND
38
USBD+
39
VCC3
40
GND
41
VCC3
42
N/C
43
GND
44
N/C
45
CL_CLK
46
N/C
47
CL_DATA
48
1.
5V
49
CL_RST#
50
GND
51
N/C
52
VCC3
IR1
:
I
nfrared Interface
connector
PIN NO.
DESCRIPTION
1
VCC
(+5V)
2
NC
3
IR
-
RX
4
G
ND
5
IR
-
TX

11
CPU_
FAN1
:
CPU
Fan Connector
PIN NO.
DESCRIPTION
1
GND
2
+
12V
3
Rotation Signal
4
PWM Control Signal
LVDS1:
24
-
bit dual
-
channel
LVDS
Connector
PIN
NO.
DESCRIPTION
PIN
NO.
DESCRIPTION
1
GND
2
GND
3
A_Y0
4
A_Y0#
5
A_Y1
6
A_Y1#
7
A_Y2
8
A_Y2#
9
A_CK
10
A_CK#
11
A_Y3
12
A_Y3#
13
GND
14
GND
15
B_Y0
16
B_Y0#
17
B_Y1
18
B_Y1#
19
B_Y2
20
B_Y2#
21
B_CK
22
B_CK#
23
B_Y3
24
B_Y3#
25
GND
26
GND
27
VCC/VCC3
28
VCC/VCC3
29
VCC/VCC3
30
VCC/VCC3
INVERTER1
:
LVDS1 Panel Backlight +12V P
ower
Source connector
PIN NO.
DESCRIPTION
1
LCD_BKLTCTL
2
GND
3
+12V
4
GND
5
BACKLIGHT ENABLE
SYS_
FAN1
:
Sys
tem
Fan
Connector
PIN NO.
DESCRIPTION
1
Rotation Signal
2
+
12V
3
GND
DIO1 :
Digital Input / Output Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 GND 2 VCC (+5V)
3 Output 3 4 Output 2
5 Output 1 6 Output 0
7 Input 3 8 Input 2
9 Input 1 10 Input 0

12
PWR1
:
Adapter DC +12V
Main
Power Input connector
CN7 DESCRIPTION
1 +12V
2 GND
3 +12V
4 GND
5 GND
HDM
I1, HDMI2
: HDMI Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
HDMI_DATA2
13
N/C
2
GND
14
N/C
3
HDMI_DATA2#
15
HDMI_SCL
4
HDMI_DATA1
16
HDMI
_SDA
5
GND
17
GND
6
HDMI_DATA1#
18
+5V
7
HDMI_DATA0
19
HDMI_HPD
8
GND
20
HDMI_GND
9
HDMI_DATA0#
21
HDMI_GND
10
HDMI_CLK
22
HDMI_GND
11
GND
23
HDMI_GND
12
HDMI_CLK#
F_PANEL1
:
Power button, Rest, HDD & Power LED
Indicators Connector
PIN NO.
DESCRIPTION
1
NC
PWRBTN
2
PWR_BTN+
3
PWR_BTN
-
HDD
LED
4
HDD_LED+
5
HDD_LED
-
Power
LED
6
PWR_LED+
7
PWR_LED+
8
GND
RESET
9
RESET+
10
GND
PWR2
:
Power Supply DC
+12V Main power in
CN7 DESCRIPTION
1 GND
2 GND
3 +12V
4 +12V

13
BAT1: +3V Battery Connector
PIN NO.
DESCRIPTION
1
BAT (+3.3V)
2
GND
JSPI1:
Flash BIOS SPI ROM Connector
PIN NO.
DESCRIPTION
PIN
NO.
DESCRIPTION
1 SPI_VCC (+3.3V) 2 SPI_CS
3 SPI_SO_SW 4 N/C
5 GND 6 SPI_CLK_SW
7 SPI_SI_SW 8 N/C
JSPI2:
Flash BIOS SPI ROM Connector
PIN NO.
DESCRIPTION
PIN
NO.
DESCRIPTION
1 +V3.3M_SPI_CON_EC 2
SPI_CS#0_CN_EC
3 SPI_SO_SW_EC 4 N/C
5 GND 6 SPI_CLK_SW_EC
7 SPI_SI_SW_EC 8 N/C
TPM1
:
TPM connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
LCLK
2
GND
3
LFRAME#
4
KEY
5
LRERST#
6
+5V
7
LAD3
8
LAD2
9
+3V
10
LAD1
11
LAD0
12
GND
13
SCL
14
SDA
15
SB3V
16
SERIRQ
17
GND
18
GLKRUN#
19
LPCPD#
20
LDRQ#
CN3: SMBus Connector
PIN NO.
DESCRIPTION
1 GND
2 SMB_DATA
3 SMB_CLK
4 +V5S

14
CN
4
:
EC debug port
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
EC_EPP_STB#
2
EC_EPP_AFD#
3
EC_EPP_PD0
4
NC
5
EC_EPP_PD1
6
EC_EPP_INIT#
7
EC_EPP_PD2
8
EC_EPP_SLIN#
9
EC_EPP_PD3
10
GN
D
11
EC_EPP_PD4
12
NC
13
EC_EPP_PD5
14
EC_EPP_BUSY
15
EC_EPP_PD6
16
EC_EPP_
KSI5
17
EC_EPP_PD7
18
EC_EPP_
KSI4

15
Board Layout: Jumper and Connector Locations