IEI Technology gKINO-DMF Series User manual

1
Mini-ITX SBC supports AMD Merlin Falcon SoC Processor, HDMI 2.0,
SATA 6Gb/s, USB3.0, PCIe mini, M.2, HD audio and RoHS
gKINO-DMF
Quick Installation Guide
Version 1.0
May 03, 2017
Package List
gKINO-DMF package includes the following items:
1 x gKINO-DMF single board computer with CPU cooler
1 x I/O shielding
1 x SATA cable
1 x Utility CD
1 x QIG
1 x One Key Recovery CD
©2017 Copyright by IEI Integration corp.
All rights reserved.

2
Specifications
SoC:
FP4 BGA supports AMD Merlin Falcon SoC
RX-421BD on-board SoC (2.1GHz, quad-core, 2MB cache,
TDP=35W)
RX-216GD on-board SoC (1.6GHz, quad-core, 1MB cache,
TDP=15W)
BIOS:AMI BIOS
Memory:
Two 260-pin 2400MHz dual-channel DDR4 non-ECC
unbuffered SO-DIMMs support up to 64 GB
Graphic:
AMD Radeon HD 10000graphic,3rd Gen. graphic core,support
DX 12, HSA 2.0
UVD v6 decode for H.265 MPEG2/4, VC-1, MVC
VCE v3.1 encode for H.254 VCE
Display Output:
Triple Independent Display
2 x HDMI 1.4 (up to 4096x2160@24Hz)
1 x DP++ (up to 3840x2160@60Hz)
Ethernet: Dual GbE RTL 8111GN
External I/O Interfaces:
4 x USB 3.0
1 x USB 2.0
Internal I/O Interfaces:
1 x MicroSD card slot
2 x RS-232 (2x5 pin, P=2.0)
4 x USB 2.0 (2x4 pin, P=2.0)
2 x RS-232/422/485 (2x5 pin, P=2.0)
2 x RS-232 (support Cctalk, TTL)(1x4 pin, P=2.54)
2 x SATA with 5V/12V output
Audio:

3
Realtek ALC662 HD audio codec
2 x Audio jacks (line-out, mic-in) on rear IO
1 x Front audio (2x5-pin)
Front Panel:
1 x Front panel (2x7 pin, power LED, HDD LED, speaker,
power button, reset button)
LAN LED: 2 x LAN LED (1x2 pin)
SMBus: 1 x SMBus (1x4 pin)
I²C: 1 x I²C (1x4 pin)
Digital I/O: 8-bit digital I/O (2x5 pin)
Expansion :
1 x PCIe x 8 slot
1 x Full size PCIe Mini card slot
Watchdog Timer:
Software Programmable support 1~255 sec. system reset
Chassis Intrusion Detection:
1 x Chassis intrusion connector (1x2 pin)
Fan Connector:
1 x CPU smart fan (1x4 pin)
1 x System smart fan (1x4 pin)
Power supply:
12V DC input
Support AT/ATX mode
1 x Internal power connector (2x2 pin)
1 x External DC jack (4-pin DIN)
Power Consumption: 12V@5.54A (AMD RX-421BD 2.1GHz
CPU with 2400 MHz 16GB DDR4 memory)
Operating Temperature: 0°C ~ 60°C
Storage Temperature: -10°C ~ 70°C
Operation Humidity: 5% ~ 95%, non-condensing
Dimensions: 170mm x 170 mm
Weight: GW: 1100g / NW: 700g

4
Ordering Information
Mini-ITX SBC supports AMD RX-421BD on board SoC (quad- gKINO-DMF-421-R10:
core 2.1GHz, 35W), DDR4 ,triple independent displays,HDMI/
DP, dual GbE, SATA 6Gb/s, USB3.0, PCIe mini, M.2,HD audio
and RoHS
Mini-ITX SBC supports AMD RX-216GD on board SoC (dual-
gKINO-DMF-216-R10:
core 1.6GHz, 15W), DDR4 ,triple independent displays, HDMI/
DP, dual GbE, SATA 6Gb/s, USB3.0, PCIe mini, M.2, HD audio
and RoHS
RS-232 cable with bracket, 300mm, P=2.0
19800-000300-100-RS:
Dual-port USB cable with bracket, 300mm, P=2.0 CB-USB02A-RS:
20-pin Infineon TPM module, software management tool, TPM-IN01-R20:
firmware v3.17

5
Jumpers setting and connectors
LABEL FUNCTION
J_ATX_AT1 AT/ATX Power Mode Setting
J_CMOS1 Clear CMOS Setup
MSATA_SW1 SATA/M.2 B Key Function Selection
CPU_FAN1 CPU Fan Connector
CPU12V1 12V Power Connector
POWER_IN1 12V Power Connector
AUDIO_CV1 Audio Line-In/Out MIC Connector
FRONT-PANEL1 Audio Source Connector
CHASSIS1 Chassis Status Connector
DIMMA_1, DIMMB_1 DDR4 SO-DIMM slots
DIO1 Digital Input / Output Connector
F_PANEL1 External Switches and Indicators Panel
JSPI_BIOS_1 Flash SPI ROM Connector
JSPI2 Flash EC ROM Connector
HDMI_CN1, HDMI_CN2 HDMI Connector
I2C1 I2C Connector (to EC)
DP1 Internal Display Port Connector
COM1, COM2 Internal RS-232 Serial Port Connectors
COM5,COM6 Internal RS-232/422/485 Serial Port Connector
USB1~2 Internal USB 2.0 Connectors
LED_LAN1, LED_LAN2 LAN Link LED Connector
MPCIE1 Mini PCI-E Card connector
S_ATA1, S_ATA2 Serial ATA 3.0 Connectors
SMB1 SMBUS Connector
SYS_FAN1 System Fan Connector
TPM1 Trusted Platform Module Connector
LAN1_USB1, LAN2_USB2 RJ45 LAN and USB 3.0 Connectors
USB1 External USB 2.0 Connectors

6
F_PANEL1: External Switches and Indicators Panel
PIN
DESCRIPTION
PIN
DESCRIPTION
PWR
BTN
1 NC 6 PWR_LED+ PWR
LED
2 PWR_BTN+ 7 PWR_LED+
3 PWR_BTN- 8 PWR_LED-
HDD
LED 4 HDD_LED+ 9 RESET+ RESET
5 HDD_LED- 10 RESET-
MSATA_SW1: SATA/M.2 B Key Function Selection
PIN NO.
DESCRIPTION
Short M.2 B Key SSD (default)
Open
SATA HDD
J_ATX_AT1: AT/ATX Power Mode Setting
PIN NO.
DESCRIPTION
Short 1-2 (Right)
ATX Power Mode (default)
Short 2-3 (Left)
AT Power Mode
J_CMOS1: Clear CMOS Setup
PIN NO.
DESCRIPTION
NC
Keep CMOS Setup
(Normal Operation)
Press button Clear CMOS Setup

7
DP1: Internal Display Port Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +5V 11 AUXP
2
LANE1N
12
AUXN
3 LANE1P 13 GND
4 GND 14 LANE2P
5
LANE3N
15
LANE2N
6
LANE3P
16
GND
7 GND 17 LANE0P
8 AUX_CTRL_DET_D 18 LANE0N
9
GND
19
+3.3V
10 HPD
HDMI_CN1, HDMI_CN2: HDMI Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 HDMI_DATA2 13 N/C
2 GND 14 N/C
3 HDMI_DATA2# 15 HDMI_SCL
4 HDMI_DATA1 16 HDMI_SDA
5 GND 17 GND
6 HDMI_DATA1# 18 +5V
7 HDMI_DATA0 19 HDMI_HPD
8 GND 20 HDMI_GND
9 HDMI_DATA0# 21 HDMI_GND
10 HDMI_CLK 22 HDMI_GND
11 GND 23 HDMI_GND
12 HDMI_CLK#

8
USB1~2: Internal USB 2.0 Connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC 2 GND
3 USB_DATA- 4 USB_DATA+
5 USB_DATA+ 6 USB_DATA-
7 GND 8 VCC
USB1: External USB 2.0 Connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC 2 USB_DATA-
3 USB_DATA+ 4 GND
LAN1_USB1, LAN2_USB2: Ethernet and USB 3.0 connectors
USB1, USB2: External USB 3.0 connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC 10 VCC
2
USB_DATA-
11
USB_DATA-
3 USB_DATA+ 12 USB_ DATA+
4 GND 13 GND
5
USB3_RX-
14
USB3_RX-
6 USB3_RX+ 15 USB3_ RX+
7 GND 16 GND
8
USB3_TX-
17
USB3_TX-
9
USB3_TX+
18
USB3_TX+
LAN1, LAN2: RJ45 LAN connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
20
LAN1_MDI0P
24
LAN1_MDI2P
21 LAN1_MDI0N 25 LAN1_MDI2N
22 LAN1_MDI1P 26 LAN1_MDI3P
23
LAN1_MDI1N
27
LAN1_MDI3N

9
AUDIO_CV1: Audio Line-In/Out MIC Connector
PIN NO. DESCRIPTION
Line_Out
(Green) Connect this port to headphone or speaker
Microphone
(Pink) Connect this port to microphone
COM5,COM6: Internal RS-232/RS-422/RS-485 Serial Port Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 DCD 2 DSR
3 RXD 4 RTS
5 TXD 6 CTS
7 DTR 8 RI
9 GND 10 GND
3
2
1
8
7
6
5
4
9
DSR(6) SIN(2)
DCD(1)
D-SUB 9PIN MALE
RI(9)
CTS(8)
RTS(7)
4
3
2
1
9
8
7
6
5
RS485 Pin define(device)
1
7
6
5
4
3
2
9
8
RS422 Pin define(device)
D-SUB 9PIN MALED-SUB 9PIN MALE
RX-(RXD422#)
RX+(RXD422+)
TX+(TXD422+)
TX-(TXD422#)
TX+(TXD485+)
TX-(TXD485#)
DTR(4)
SOUT(3)
MODE 00 MODE 01
GND(5)
MODE 10/11
RS232 Pin define(device)
COM1, COM2: Internal RS-232 Serial Port Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 DCD 2 DSR
3 RXD 4 RTS
5 TXD 6 CTS
7 DTR 8 RI
9 GND 10 GND

10
S_ATA1, S_ATA2: Serial ATA 3.0 Connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 5 SATA_RX-
2 SATA_TX+ 6 SATA RX+
3
SATA_TX-
7
GND
4
GND
8
N/C
FRONT-PANEL1: Audio Source Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 LMIC2-L 2 AUD_GND
3 LMIC2-R 4 PRESENCE#
5 LLINE2-R 6 MIC2-JD
7 FRONT-IO 8 NC
9 LLINE2-L 10 LINE2-JD

11
CPU_FAN1, SYS_FAN1: Fan Connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 +12V
3 FANIO 4 PWM
MPCIE1: Mini PCI-E Card connector
PIN
DESCRIPTION
PIN
DESCRIPTION
1 PCIE_WAKE# 2 +3.3V
3 N/C 4 GND
5 N/C 6 1.5V
7 N/C 8 N/C
9 GND 10 N/C
11 MSATA_CLK# 12 N/C
13 MSATA _CLK 14 N/C
15 GND 16 N/C
17 PLTRST_N 18 GND
19 N/C 20 +3.3V
21 GND 22 PLTRST_N
23 MINI_RXN 24 +3.3V
25 MINI_RXP 26 GND
27 GND 28 1.5V
29 GND 30 SMB_CLK
31 MINI_TXN 32 SMB_DATA
33 MINI_TXP 34 GND
35 GND 36 USB_DATA-
37 GND 38 USB_DATA+
39 +3.3V 40 GND
41 +3.3V 42 N/C
43 +3.3V 44 N/C
45 CLINK_CLK 46 N/C
47 CLINK_DATA 48 1.5V
49 CLINK_RST# 50 GND
51 MSATA_DET 52 +3.3V

12
TPM1: Trusted Platform Module Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 LCLK 2 GND
3 LFRAME# 4 KEY
5 LRERST# 6 +5V
7 LAD3 8 LAD2
9 +3.3V 10 LAD1
11 LAD0 12 GND
13 SCL 14 SDA
15 SB3V 16 SERIRQ
17 GND 18 GLKRUN#
19 LPCPD# 20 LDRQ#
CPU12V1: 12V Power Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 GND 2 GND
3 12V 4 12V
POWER_IN1: 12V Power Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
12V
2 GND
3
12V
4 GND
5 GND
DIO1: Digital Input / Output Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
VCC
3
Output 3
4
Output 2
5
Output 1
6
Output 0
7
Input 3
8
Input 2
9
Input 1
10
Input 0

13
CHASSIS1: Chassis Status Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +3.3VSB 2 CHASSIS OPEN
LED_LAN2: LAN Link LED Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +3.3V 2 LAN2_LED_LNK#_ACT
LED_LAN1: LAN Link LED Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 +3.3V 2 LAN1_LED_LNK#_ACT
I2C1: I2C Connector (to EC)
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 GND 2 I2C_DAT
3 I2C_CLK 4 +5V
SMB1: SMBUS Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 GND 2 SMB_DATA
3 SMB_CLK 4 +5V
JSPI2: Flash EC ROM Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+1.8V
2
SPI_CS#
3
SPI_SO
4
SPI_CLK
5 SPI_SI 6 GND
JSPI_BIOS_1: Flash SPI ROM Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+1.8V
2
SPI_CS#
3
SPI_SO
4
SPI_CLK
5
SPI_SI
6
GND

14
Board Layout: Jumper and Connector Locations
(Unit: mm)