IFM Electronic efector 200 EY3098 User manual

Operating instructions
Laser adjustment aid for
safety light curtains / light grids
Type OY9xxS
EY3098
704916 / 00 08 / 2010
UK

2
Contents
1 Preliminary note2
11 Symbols used 2
12 Warning signs used 2
2 Safety instructions 2
3 Functions and features 3
4 Installation 4
5 Maintenance, repair and disposal5
51 Battery replacement 5
1 Preliminary note
1.1 Symbols used
► Instruction
→ Cross-reference
1.2 Warning signs used
WARNING
Warning of serious personal injury
Death or serious irreversible injuries may result
2 Safety instructions
WARNING
Visible laser light; laser protection class 2
Use of controls or adjustments other than those specified herein may result in hazardous
radiation exposure Damage to the retina is possible
► Do not stare into the laser beam!
► Adhere to the caution and warning notes on the product label
► Switch on the unit for adjustment only
► If you do not use the unit for a longer period of time, remove the batteries

3
UK
Product label
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAX POWER: 1 mW
WAVELENGHT: 650 nm
Laser
3 Functions and features
The laser adjustment aid serves for fast and easy alignment of the OYxxxS safety
light curtains / light grids
The unit works with visible laser light that enables easy orientation of the transmit-
ter and receiver and of corner mirrors, if they are used
Do not use the unit as a laser pointer for presentations, for example

4
4 Installation
► First of all align the safety light curtains / light grids and any mirrors without the
laser adjustment aid
► Insert the supplied batteries into the unit → 51 Insert batteries
► Attach the laser adjustment aid onto the transmitter (→ Figure 1) Ensure the
correct position
► Make sure that there are no people in the range of the laser beam
► Switch on the laser adjustment aid (→ Figure 2)
► Adjust the transmitter, receiver and any mirrors until the laser beam on the
receiver is in the same position as on the transmitter
► For exact adjustment the process has to be repeated for the top, the middle
and the bottom of the safety light curtain / safety light grid
Figure 1 Figure 2
1: Exit laser light 2: On/off switch

5
UK
5 Maintenance, repair and disposal
If used correctly no maintenance and repair measures are necessary
Only the manufacturer is allowed to repair the unit
After use dispose of the unit in an environmentally friendly way in accordance with
the applicable national regulations
5.1 Replace batteries
► Open the lid of the battery compartment (→ Figure)
► Remove all flat batteries and replace them with new ones of type AAA Do not
use rechargeable batteries
► Note the indicated polarity when inserting the batteries
► Close the lid of the battery compartment
► Dispose of the flat batteries in an environmentally friendly way
► If you do not use the unit for a longer period of time, remove the batteries
Technical data and further information at wwwifmcom