Battery tool use and care
a. Use laser spirit levels only with
specically designated batteries.
Use of any other batteries may create a
risk of injury and re.
b. When batteries are not in use,
keep them away from other metal
objects, like paperclips, coins, keys,
nails, screws or other small metal
objects that can make a connection
from one terminal to another.
Shorting the battery terminals together
may cause burns or a re.
ASSEMBLY
Inserting/Replacing the Battery
Use only alkali-manganese batteries.
To open the battery lid (9), press
the latch (8) in the direction of the
arrow and remove the battery lid.
Insert the batteries (sold separately).
Pay attention to the correct polarity
of the batteries according to the
representation in the battery
compartment. Always replace all
batteries at the same time. Only use
batteries from one brand and with the
identical capacity.
•Remove the batteries from the
laser spirit level when you are
not using it for extended periods.
When storing for extended periods,
the batteries can corrode and
discharge themselves.
INSTRUCTIONS FOR USE
Initial Operation
•Protect the laser spirit level
against moisture and direct sun
irradiation.
•Do not subject the laser spirit
level to extreme temperatures or
variations in temperature. As an
example, do not leave it in vehicles
for longer periods. In case of large
variations in temperature, allow the
laser spirit level to adjust to the
ambient temperature before putting it
into operation.
•Avoid heavy impact to or
dropping of the laser spirit level.
Damage to the laser spirit level can
impair its accuracy. After heavy
impact or shock, compare the laser
6
