Ikegami HDK-99 User manual

㻻㻲㻲
㻱㼄㼀
㻼㻻㼃㻱㻾
㻭㻯㼀㻵㼂㻱
㻿㼀㻭㻺㻰㻮㼅
㻮㻿㻛㻯㻯㼁
HIGH DEFINITION CAMERA SYSTEM
HDK-99
(FA-97A)
OPERATION MANUAL

1803 1st Edition (E)
1
OUTLINE
2
NAME and FUNCTION
INSTALLATION and 3
CONNECTION
4
OPERATION
CAMERA SETTINGS and 5
ADJUSTMENT
TROUBLE SHOOTING and 6
MAINTENANCE
7
SPECIFICATIONS
CHANGING INFORMATION
HDK-99
(FA-97A)
HIGH DEFINITION CAMERA SYSTEM
OPERATION MANUAL

Copyright © 2012 Ikegami Tsushinki Co., Ltd.
We reserve the copyright on the software we create.
No part of this publication may be modied or reproduced in any form, or by any means, without prior written permission from
Ikegami Tsushinki Co., Ltd.

i
HDK-99 1803 VER1 (E)
PRODUCTS CONFORMING TO RoHS DIRECTIVE
PRODUCTS CONFORMING TO RoHS DIRECTIVE
Following products described in this manual are products conforming to RoHS directive.
· HDK-99 Color Camera
· VFL201A, VFE741A Viewnder
· CCU-980 Camera control unit
· OCP-300 Operation Control Panel
· MCP-300 Maintenance Control Panel
· BSH-300 Base Station Hub
Products conforming to RoHS directive include products that do not contain specied hazardous substances such as lead, mercury,
cadmium, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) in electrical and
electronic equipment excluding following exemption applications based on the EU directive (Directive2002/95/EC).
* About RoHS Directive
The RoHS directive stands for "the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment"
and is one of environmental directives in Europe. This directive restricts the use of specied hazardous substances in electrical and
electronic equipment.
●Applications exempted from RoHS directive compliance
Followings applications are permitted as exemptions from RoHS directive compliance.
1. Mercury in compact uorescent lamps not exceeding 5mg per lamp
2. Mercury in straight uorescent lamps for general purposes not exceeding:
· halophosphate 10mg
· triphosphate with a normal lifetime 5mg
· triphosphate with a long lifetime 8mg
3. Mercury in straight uorescent lamps for special purposes
4. Mercury in other lamps not specically mentioned in this Annex
5. Lead in the glass of cathode ray tubes, electronic components and uorescent tubes
6. Lead as an alloying element in steel containing up to 0.35% lead by weight, aluminum containing up to 0.4% lead by weight and
as a copper alloy containing up to 4% lead by weight
7. Lead in following items
· Lead in high melting temperature type solders (i.e. tin-lead solder alloys containing more than 85% lead)
· Lead in solders for servers, storage and storage array systems
· Lead in solders for network infrastructure equipment for switching, signaling, transmission as well as network management
for telecommunication
· Lead in electronic ceramic parts (e.g. piezoelectronic devices)
8. Cadmium plating except for applications banned under Directive 91/338/EEC amending Directive 76/769/EEC relating to
restrictions on the marketing and use of certain dangerous substances and preparations
9. Hexavalent chromium as an anti-corrosion of the carbon steel cooling system in absorption refrigerators
10.Lead used in compliant pin connector systems
11.Lead as a coating material for the thermal conduction module C-ring
12. Lead and cadmium in optical and lter glass
13.Lead in solders consisting of more than two elements for the connection between the pins and the package of microprocessors
with a lead content of more than 80% and less than 85% by weight
14.Lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit Flip
Chip packages
15.Decabrominated diphenyl ether (Deca-BDE) in polymeric applications

ii HDK-99 1803 VER1 (E)
MAINTENANCE OF PRODUCTS CONFORMING TO RoHS DIRECTIVE
MAINTENANCE OF PRODUCTS CONFORMING TO RoHS DIRECTIVE
Work with care about followings for maintenance of products conforming to RoHS directive.
1. Identification
- For products conforming to RoHS directive, the letter “E” is appended at the end of the serial number on the label. For models
that the letter cannot be appended to the serial number, the letter “E” will be described in a distinguishable position on the label.
A description example on a main label is shown below.
MODEL HDK-99
SERIALNo. AA123456 E
Label
Product conforming to RoHS directive
· The printed circuit boards of the RoHS compliant products have ether of the following marks with serigraph or label.
Phase 3A Phase 3
2. Soldering
Since the melting point of lead-free solder used for the products conforming to RoHS directive is 20 to 45 degrees Celsius higher
than that of conventional solder with lead (Sn-Pb eutectic solder), a high temperature needs to be set to a soldering iron. Taking
allowable temperature limit of the parts and stable work into consideration, use a soldering iron with excellent thermal recovery
characteristics.
· Recommended solder composition is "Sn/3.0Ag/0.5Cu" or equivalent.
· Separate the soldering iron exclusively for RoHS products and the soldering iron for conventional use.
· Set the temperature of the soldering bit to 350 to 370 degrees Celsius.
The temperature may need to be adjusted according to the size of the copper foil land on the print-circuit board and the tip width
of the soldering bit.
· Finish by a lead-free solder looks dull or whitish compared to conventional solder with lead.
· If the customer mixed the lead-solder with the main body wiring or the circuit board, it becomes guarantee off the subject.
Ikegami doesn't guarantee to do the repair work. Because the solder polluted with lead cannot be removed.
3. Parts
Be sure to use parts conforming to RoHS directive.

iii
HDK-99 1803 VER1 (E)
INFORMATION TO THE USER
INFORMATION TO THE USER
1. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
2. Declaration of conformity
The CE mark means that the following products will meet and the Standards EN55032, EN-61000-3-2, EN6100-3-3, EN55103-2
E4-E5 (for EMC), EN62368-1 (for LVD).
For European customer.
People’s Republic of China Electronic Industry Standard (SJ/T11364—2006)
Marking Styles for Names and Contents of Toxic or hazardous Substances and Elements
Part Name
Toxic or hazardous Substances and Elements
Lead
(Pb) Mercury (Hg) Cadmium (Cd)
Hexavalent
Chromium
(Cr/(VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
HDK-99 ×○○○○○
○: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit
requirement in SJ/T11363-2006.
×: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is
above the limit requirement in SJ/T11363-2006.

iv HDK-99 1803 VER1 (E)
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
This manual describes the precautions using various pictorial symbols for you to use the product safely. Please read these
precautions thoroughly before use. The symbols and meanings are as follows:
The following hazard alert symbols are used to indicate the level of impact on the body or property
when you do not follow the precautions.
Indicates that mishandling of the product by ignoring this label may lead to a danger resulting in a
serious injury or death.
Indicates that mishandling of the product by ignoring this label may lead to a danger resulting in an
injury or property damage.
The following symbols are used to indicate the expected injury or hazards when you do not follow
the precautions.
Indicates general cautions on such matters as safe work, procedure, and installation location.
Mishandling may not directly lead to death, injury, or property damage.
Indicates that mishandling may cause an electric shock.
Indicates that mishandling may cause a re.
Indicates that mishandling may cause injury.
The following symbol is used to indicate other precautions to prevent damage or hazard from
occurring:
Indicates prohibited action.

v
HDK-99 1803 VER1 (E)
SAFETY PRECAUTIONS
■Handling Precautions
Regarding the Product
Do not disassemble or modify the product which is not described in this manual. Doing so may
cause re, electric shock, or injury.
Regarding the Power
When you disconnect the cable, be sure to hold the plug and pull. Failure to do so may cause a re
or electric shock due to a damaged cable.
To inspect or operate on the inside of the equipment, turn off the power and wait for one or two
minutes before starting work. High voltage is present in some modules and connectors of this
product.
When you want to intercept a power supply surely, I pull a ber cable of the camera side, or, please
pull an AC plug of the BS/CCU side.
Regarding the Product
Do not lift or hold the camera by the projection parts.
If you lift or hold the camera by the viewnder or the lens, you are prone to dropping it. Moreover,
the connection parts between the camera and the viewnder, or the camera and the lens may be
exposed to unnecessary pressure, which may cause equipment damage.
Always install the accessories or connect the cables after placing the camera on a xed position.
When installing such accessories as lens or microphone, x the camera on a stable place (e.g. on a
table, a tripod, etc.).
Avoid use or storage in the following conditions:
- Extremely high/low temperature
- In direct sunlight for a long time, or near a heater
- High humidity or dusty
- Exposed to water or other liquid
- Strong vibration or shock
- Strong magnetic eld or radio waves
- lightning
- In rain without the rain cover

vi HDK-99 1803 VER1 (E)
SAFETY PRECAUTIONS
Regarding the Product
Be sure to hold the plug and pull when you disconnect the cable.
Failure to do so may cause a re or electric shock due to a broken cable.
Avoid moving the equipment suddenly from an extremely cold place to a warm place.
Condensation may occur in the CMOS image sensor or other parts.
Do not drop or insert a metal object such as a pin or a foreign object into the equipment.
Do not spread or spill water or other liquid on the equipment.
Do not subject the equipment to a strong shock or vibration.
Doing so may cause damage or malfunction of the equipment.
Since semiconductor pixels are adapted in CMOS image sensor, image burn-in will not occur in
normal operation. When you shoot subjects with an excessive amount of light (e.g. sun, laser beam,
etc.) for a long time, pay attention to temperature rise inside the CMOS sensor.
Before connecting a VTR or accessories, make sure that the camera and equipment to be connected
are powered off. Also, be sure to use dedicated cables.
Laser beams may damage the CMOS image sensors. If you shoot a scene that includes a laser
beam, be careful not to let a laser beam become directed into the lens of the camera.
Excessive sound pressure from the headset may cause a hearing loss.
Regarding the Power and the Lithium Battery
Use the product in compliance with the rating of the fuse within the product and that within the
Camera Control Unit (CCU). Otherwise, a fault can occur.
Do not use an unspecied battery.
Wrong usage of batteries may cause liquid leak, explosion, and heat, and at worst injury or re.
When changing or discarding a battery, please contact Ikegami's sales and service centers.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to
the instructions.
Regarding the Fiber Connector and the Fiber Optic Cable
Fiber optic cable connectors are quite similar to each other in shape. Before connecting ber optic
cables, thoroughly check male or female, the diameter, type and manufacturer of connectors.
If the ferrule is dirty, wipe the dirt off with cotton swabs soaked in alcohol.
The ber cable supplies AC220V power from CCU to the camera.
Although safety measures are fully taken such as the safety circuit that stops the power supply
from the CCU within a short time after an optical ber cable is removed or short-circuited, never
force to bend, twist, or damage the cable, and take great care when handling.

vii
HDK-99 1803 VER1 (E)
SAFETY PRECAUTIONS
Regarding the Fiber Connector and the Fiber Optic Cable
Take care for the following:
- When disconnecting the ber optic cable from the camera or from the CCU, always hold the ber
connector (plug) and not the cable.
- Do not crush the cable.
- Since there can be various obstacles (such as a corner of a building, glass, rough ground surface)
in places where the cable is connected, do not drag the cable without winding.
- Turn off the power before removing the ber optic cable.
- The allowable radius of curvature of ber optic cables is approximately six times of the outer
diameter of cables (approx. 60 mm for a φ9.2mm-wide cable). Do not force to wind less than
specied. Forcible winding can break ber leads within the cable.
Fiber Optic Cable
Radius
Approx. 60mm
- When connecting a ber optic cable to a ber connector, anchor the ber optic cable with a cable
clamp.
Optical Fiber Cable
CAMERA CABLE Clamp CAMERA CABLE Clamp
(optional)

viii HDK-99 1803 VER1 (E)
SAFETY PRECAUTIONS
■Environmental Cautions
Regarding the product
When continuously operating the product in a rainy, cold or hot conditions, use a rain cover, cold-
weather cover, and shade cover respectively.
Avoid storing the product in a dusty place for a long time. If unavoidable, use a dustproof cover.
When shooting in places such as airports, military bases or transmitting stations where magnetic
and radio elds are excessively strong, completely shield the camera by covering it with aluminum
foil.
■Maintenance
Regarding the product
Before performing maintenance on the product, be sure to turn off the power for safety and for
protection against malfunction.
Clean the product using a dry and soft cloth.
If the stain is hard, soak the cloth with water or detergent, wring well and wipe. If you use
detergent, wipe off the detergent with a cloth that is soaked in just water and wrung well.
■Notice for Use
- When carrying or storing the product, always use a carrying case.
- Before shooting important subjects, take test shots to obtain the desired effect.
- After using the product, always turn off the power.
■Regular Maintenance Recommended
This product includes parts that wear out and have a limited life even in proper use or storage. Therefore, regular maintenance is
recommended to extend the life and safe use of this product for a long time. Please contact Ikegami's sales and service centers for
the regular maintenance and repair of our products.

ix
HDK-99 1803 VER1 (E)
HOW TO READ THE OPERATION MANUAL
HOW TO READ THE OPERATION MANUAL
This page explains general notes on reading the HDK-99 Operation Manual, and the symbols and notations used in the manual.
■Notes on the Manual
- This manual is written for readers with a basic knowledge of handling broadcast cameras.
- The contents of this manual are subject to change without notice in the future.
■Symbols
The symbols used in this manual are as follows:
CAUTION: Things you have to be careful during operation. Be sure to read.
Note: Supplementary information or guidance
Reference: Sections where related information is available
Term: Explains the meaning of a term you need to know.
■Notations
The following notations are used in this manual.
This product, camera Indicates HDK-99. (Including FA-97A)
CCU/BS Camera control unit / Base Station refers to CCU-980 / BS-98
respectively.
OCP Basically indicates OCP-300 Operation Control Panel.
MCP Basically indicates MCP-300 Maintenance Control Panel.
" " - " " - " " Indicates the items enclosed by double quotes (") are to be
selected and conrmed in the order shown.
■Illustrations and Displays
The illustrations and displays in the text are provided for explanation and may be slightly different from the actual equipment or
image.
■Related Manuals
- CCU-980 Camera Control Unit Operation Manual
- OCP-300 Operation Control Panel Operation Manual
- MCP-300 Maintenance Control Panel Operation Manual
- BSH-300 Base Station Hub Setup Manual

xHDK-99 1803 VER1 (E)
HOW TO READ THE OPERATION MANUAL
■Structure of Operation Manual
HDK-99 High Denition Camera System Operation Manual is intended to both safely and smoothly operate the HDK-99.
The Operation Manual consists of seven chapters. By reading it in sequence, you can smoothly perform a series of steps, from
connection to operation. Furthermore, by combination use of CCU-980 (camera control unit), this product enables not only stand-
alone VTR location shooting but also various shooting styles such as studio shooting and eld shooting as a system camera. Refer
to other manuals such as for the CCU-980.
Chapter 1 OUTLINE
Explains the features and the main operating systems of this product.
If you are not familiar with HDK-99 High Denition Camera System, please start with this
chapter.
Chapter 2 NAME and FUNCTION
Explains the name and function of each part of the Camera.
Chapter 3 INSTALLATION and CONNECTION
Explains how to mount this product, lens, and viewnder.
Taking examples of studio shooting, stand-alone shooting, and VTR location shooting, explains
how to connect this product to the peripheral equipment.
Chapter 4 OPERATION
Explains setup before shooting.
Before shooting for the rst time, read this chapter and check that this product is operating
normally.
Chapter 5 CAMERA SETTINGS and ADJUSTMENT
This product realizes detailed settings to support a wide range of operations and various video
expressions through the menu window. This chapter explains switch settings, menu settings, and
DIP switch settings on the modules inside of the Camera.
Chapter 6 TROUBLE SHOOTING and MAINTENANCE
When the alarm lamp lights during the operation of this product, read here to know the problem.
This chapter also explains the regular maintenance such as cleaning of connectors and resetting
of breaker.
Chapter 7 SPECIFICATIONS
Explains the specications of this product.
CHANGING INFORMATION
Contains revision information of design revision or customer-specic specication requested
by customers. Read by comparing with the main text of the operation manual. ("CHANGING
INFORMATION" may be sent to you later on.)

xi
HDK-99 1803 VER1 (E)
CONTENTS
HDK-99
(FA-97A)
High Definition Camera System
Operation Manual
PRODUCTS CONFORMING TO RoHS DIRECTIVE...i
MAINTENANCE OF PRODUCTS CONFORMING TO
RoHS DIRECTIVE..............................ii
INFORMATION TO THE USER ..................iii
SAFETY PRECAUTIONS .......................iv
HOW TO READ THE OPERATION MANUAL .......ix
Chapter 1. OUTLINE
1.1 Features of This Product ................ 3
Fusion of High Quality CMOS and Superb
Image Processing Techniques............3
Powerful Support for Various Video
Expressions .......................... 3
Pursuit for Superb Operation and Ease of Use . 4
Peripheral Equipment Supporting a Wide
Range of Applications ..................4
Equipped with Various Interfaces .........4
Support Function for Camera Setup ....... 4
1.2 Operating Systems..................... 5
1.3 Connection Diagram ...................9
Chapter 2. NAME and FUNCTION
2.1 Camera and Viewfinder ................ 13
Camera Right View ................... 13
Camera Left View..................... 17
Camera Front View ................... 19
Camera Rear View.................... 21
Viewfinder (VFL201A) .................25
2.2 Displays in the Viewfinder .............. 27
LED Indicator ........................ 27
Center Marker, Safety Marker,
Frame Marker........................ 27
Zebra Indicator.......................27
Side Mask Function ...................28
Display Mode ........................ 28
Viewfinder Display ....................28
Chapter 3.
INSTALLATION and CONNECTION
3.1 Preparation..........................33
Precaution on Product Use .............33
Make sure the Power Switch is OFF ......33
Connection Example for Each
Operating System ....................33
3.2 Camera and Peripheral Installation and
Connection..........................39
Mounting/Removing the Camera on/from
the Tripod ...........................39
Mounting and Removing the Lens........ 41
Mounting and Removing the Viewfinder ...43
Attaching a Microphone................45
Connecting a Headset .................46
Attaching a Shoulder Belt .............. 46
3.3 Power Connection .................... 47
Power Supply from AC Adapter .......... 47
Power Supply from CCU ...............48
3.4 Monitor Connection ................... 51
Connecting Camera and Monitor......... 51
3.5 CCU Connection ..................... 52
Connecting Camera and CCU...........52
Chapter 4. OPERATION
4.1 Operating Procedures ................. 57
4.2 Switch Position Check .................58
4.3 Turning ON Power ....................60
Power Supply from AC Adapter ..........60
Power Supply from CCU ...............60
4.4 Viewfinder Adjustment................. 62
Diopter Adjustment and Screen Adjustment . 62
Display Mode Check ..................62
4.5 Output Signal Check ..................63
Color-Bar Signal Check ................63
Test Pulse (CAL Signal) Check ..........64
External Chart Check..................64
4.6 Auto Setup ..........................65
FULL Auto Setup and LEVEL Auto Setup .. 67
FULL QUICK Auto Setup and
QUICK Auto Setup....................67
Auto White Balance ...................68
Auto Black Balance ...................69
Auto Black Shading ................... 70
4.7 Preparation for Shooting in Particular
Environment......................... 71
Chapter 5.
CAMERA SETTINGS and
ADJUSTMENT
5.1 Settings Using Switches on the Camera ... 75
Adjusting Headset Volume.............. 75
Selecting Shutter Speed ............... 76

xii HDK-99 1803 VER1 (E)
CONTENTS
Enhancing the Vertical Resolution
(Super-V Function).................... 78
Switching the GAIN ................... 79
Allocating Functions to the P.FUNC Switch. 80
Screen Detail Enhancement (DTL) ....... 81
5.2 Settings from the Menu ................82
Basic Operation of the Menu............82
Menu Configuration and content ......... 85
5.3 Using the Memory Card............... 105
Chapter 6.
TROUBLE SHOOTING and
MAINTENANCE
6.1 Alarm Lamp on the OCP or MCP Flashes
ON and OFF.........................113
6.2 "TEMP!!" or "FAN!!" Appears
on the VF Screen.....................114
6.3 Initializing the Settings of this Product.....115
6.4 Cleaning Camera Connectors ...........117
6.5 Reset the Breaker ................... 120
6.6 Sensor defect correction ...............121
Chapter 7. SPECIFICATIONS
7.1 HDK-99 Specifications................ 125
7.2 External Dimensions Diagram.......... 127
7.3 External Connections..................131
7.4 Scene File ......................... 143
CHANGING INFORMATION....................145

1
OUTLINE

1
OUTLINE
3
HDK-99 1803 VER1 (E)
1.1 Features of This Product
■HDK-99
This product is a digital processing LSI (ASIC) compact broadcast camera with full digital
image processing technology and collaboration of the latest image processing FPGA. It is
possible to create images from natural and delicate to bold and colorful with State-of-the-
art image effects meeting the producer’s requirements.
The image for VF (View Finder) is equipped with a new image processing circuit (focus
assist function) and supports the focusing operation of the camera operator.
1.1 Features of This Product
Fusion of High Quality CMOS and Superb Image Processing Techniques
■2.6 Million pixel 3CMOS
2.6 million pixel 2/3-inch CMOS sensors are employed to achieve superb picture quality
with a High sensitivity of 2,000 lx F11 (1080 / 59.94i) and high image quality of horizontal
resolution 1,000 TV lines and S/N ratio of 62dB (typ.) in an HDTV system.
Powerful Support for Various Video Expressions
■Dockable camera style compliant with Unicam HD Series
Fiber adapters and triax adapter can be easily replaced depending on the operation mode.
■Focus Assist Function
We installed a new image processing circuit for the image for the VF to support focusing by
the camera operator.
■Lens Aberration Correction Function
The camera acquires correction data from the corresponding lens and automatically
corrects lens chromatic aberration based on lens zoom, focus, iris position information.
■Supports current 2/3-inch analog I / F lens and serial I / F lens
With both conventional lenses and serial I / F lenses, it provides the same operational
control,including automatic recognition for serial lenses.
■Advanced Matrix Function
It is possible to perform the appropriate color conversion under special circumstances, for
example, under monochromatic blue light source such as on a concert stage, for which the
color conversion range was exceeded for the conventional matrix function.
■HDR (High Dynamic Range) Output Function
Includes an HDR function with HLG(Hybrid Log Gamma)curve.
Even when shooting a subject with a large contrast difference, it realizes a gradation close
to the natural appearance, enabling a rich image expression that could not be achieved with
conventional HD cameras.
■Wide Color Gamut (equivalent to ITU-R BT.2020)
Equipped with a wide color gamut (equivalent to ITU-R BT.2020 ARIB STD-B67) in order
to further improve color reproduction.
■16-Axis Color Correction Function
This function supports 16-axis color gamut and allows the ne adjustment of hue and
saturation of the video.
Since the real time operation is possible with this function, it is even more useful when
color matching is performed on the operating site.

4HDK-99 1803 VER1 (E)
1.1 Features of This Product
Pursuit for Superb Operation and Ease of Use
■High Performance Color Viewnders
A 2" 16:9 LCD HDTV color viewnder is adopted for portable operation. Full color video
monitoring is possible with QHD (960×540) high resolution. 7" LCD and 7.4" OLED studio
color viewnders can be also selected as an option.
■Low Center-of-Gravity, Light Weight, and Excellent Balance
Designed with a low center-of-gravity, light weight, and excellent balance, in consideration
of the balance when shooting on the shoulder and holding at various angles.
■On-Line Diagnostics
An on-line diagnostic system enables monitoring the status of circuits including video,
control, ber optic transmission, pulses and power supply. This enables you to always know
the status of the camera.
■Rotating Camera Cable Connection
Employs a rotating ber camera cable connector. This enables studio shooting and eld
shooting at various angles.
■Return Switches
Switches to choose RET-1 or RET-2 are also equipped on the handle grip of the camera to
easily switch when low angle shooting.
■Dockable chassis structure
It has a basic structure that can be separated into camera and transmission parts and
provides high exibility and maintainability.
Peripheral Equipment Supporting a Wide Range of Applications
By combining the SE-H750 system expander, 7.4"OLED view nder and full studio lens
you can transform the lightweight portable camera into a fully equipped studio live camera.
Equipped with Various Interfaces
- The camera includes HD-SDI signal output.
- The camera has an interface for return video in HD-SDI signal form. (RET HD-SDI signal
transmission)
- A hybrid ber/copper camera cable (two single-mold bers, four power leads, two control
signal leads) connects between the camera and the CCU-980, and the transmission
complies with BTA S-004A (Japan standard) and SMPTE292M (International standard).
The distance of signal transmission and power supply allows up to 3,000 m by multiple
connections (up to 12 connections) of composite ber optic cables (9.2 mm diameter).
- DC12V (Maximum 0.5A) can be supplied for the camera.
- When the camera is connected to the CCU-980, you can use the data trunk channel (RS-422)
for virtual studio applications.
Support Function for Camera Setup
The level adjustment and settings for the camera can be easily set up by calling up the
ENGINEER SET FILE that is set by user engineer or the FACTORY SET FILE that is set
by Ikegami according to the environment and shooting conditions where the camera system
is used. This enables quick initialization of the camera status even though the settings have
changed.
Note:
When combining with the SE
- H750 system expander, it is
necessary to attach an optional
front plate to the camera.
Reference:
Refer to "6. TROUBLE
SHOOTING and
MAINTENANCE : 6.3
Initializing the Settings of
this Product" (P115)for the
ENGINEER SET FILE and
FACTORY SET FILE.