Wireless Charging Pad
User’s Guide for Model IACQ60 v2400-01
Indicator Light
Charging = Blue Light
FOD = Flashing Blue Light
Connect the charger to a power
source like a computer or USB
power adapter (not included).
When power is connected,
place your phone on the pad to
charge.
Features
• Inductive charging
• Compatible with wireless charging devices
• Over current, over voltage, high temperature
and short circuit protection
• Output power: 5W
Includes
• Micro-USB power cable
Foreign Object Detection (FOD)
When the Charger detects a metallic or magnetic
object on the pad that will interfere with the normal
operation of the charger, the Indicator Light will ash
blue and wireless charging will automatically stop.
Notes On Wireless Charging
• Before using, be sure to remove the protective
lm that covers the charger base where your
phone rests.
• Do not leave the charger and your mobile
device unattended while charging.
• Depending on the location of the charging coil
on your mobile device, your device may not
charge in all positions. Find the position that
works best for your device.
• If you are using your device with a connected
headset, place the device in the landscape
position. Placing your device in the portrait
position may move its charging coil out of
position to charge.
• Wireless charging may not work if you have a
case that is A) too thick or B) has a magnet. In
order to charge, you will need to remove the
case before placing on the charging pad.
• If you are using an attached wireless charging
case on your mobile device, never place just the
case on the charging pad. This may overheat the
charging pad and/or the case, and has a risk of
re and injury.
• If you connect a wired or portable battery
charger to your device while it is on the
charging pad, the pad will disable wireless
charging.
• The wireless charger does not have a power
switch. To save energy, unplug the wireless
charger from its power source.
• The wireless charger may cause interference in
areas with weak Wi-Fi signal.
