iLive IAEB37-1879-01 User manual

Wireless Stereo Earbuds
User’s Guide for Model IAEB37-1879-01
Protect for Today
Sustain for Tomorrow
Made
Green
Specications are subject to change without notice.
Copyright © 2017 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property
of their respective owners.
International Support
To download this User’s Guide in English, Spanish,
or French, or to get answers to frequently asked
questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en Inglés,
Español y Francés, o para obtener respuestas a
preguntas frecuentes, visite la sección de apoyo en:
www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en Anglais,
Espagnol ou Français, ou pour obtenir des réponses
à des questions fréquemment posées, consultez la
rubrique d’assistance sur:
www.iLiveElectronics.com
FCC WARNINGS
• Warning: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Contact Information
Website: www.iLiveElectronics.com
Email Support: [email protected]
Email Parts: [email protected]
Phone Support: 1-888-999-4215
Warranty
For Warranty Information and the most
up-to-date version of this User’s Guide, go to:
www.iLiveElectronics.com.
ADDITIONAL WARNINGS
• WARNING: To prevent re or shock hazards, do not expose
this unit to rain or moisture.
• WARNING : Where the mains plug or appliance coupler is
used as the disconnect device, such disconnect device shall
remain readily operable.
• Lithium batteries, like all rechargeable batteries, are
recyclable and should be recycled or disposed of according to
state and local guidelines. They should never be disposed of in
normal household waste and they should never be incinerated,
as they might explode. Contact your local government for
disposal or recycling practices in your area.
• WARNING: This product may contain chemicals known
to the State of California to cause birth defects, or other
reproductive harm (California Prop 65). Wash hands after
handling.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on
your music player is turned down before connecting your
earbuds. After placing earbuds in/on your ears, gradually turn
up the volume until you reach a comfortable listening level.

DC Power Input
Volume
Power / Pair / Play / Pause /Speakerphone
Press and hold for 8-9 sec. to power ON and begin pairing.
Press and hold for 5-6 sec. to power ON/OFF.
Press to play/pause audio or answer/end a phone call.
Overview & Controls
Power Status Indicator Light
Power ON Flashing blue light
Low Battery Flashing red light
Charging Solid Red light
Finished Charging Solid Blue light
Bluetooth Status Indicator Light
Pairing Bluetooth Flashing red and blue lights
Successfully Paired Slowly ashing blue light
Features
• Bluetooth wireless
• Sweatproof
• Wireless range: 33 feet
• Voice prompts announce earbud operations
• Built-in microphone
• Micro-USB port for battery recharge
• DC battery power: built-in rechargeable battery
• Battery life: approx. 4 hrs
Includes
• 3 sets of eartips
• Micro-USB to USB charging cable
• User’s guide
Charging the Battery
Initial charge time is approximately 2 hours. Charge
fully before use. The low battery indicator will ash for
1 minute, then the unit will automatically power OFF.
1. Using a Micro-USB to USB cable (included),
connect to the USB port of a powered on
computer or USB power adaptor to charge.
Pairing a Bluetooth Device
1. While the unit is OFF, press and hold the
Play/Pause/Speakerphone/Pair button for
approximately 8-9 seconds until the indicator
light ashes red and blue. When pairing, remain
within 3 feet of the unit.
2. Using the controls on your Bluetooth device,
select IAEB37 in your Bluetooth settings to pair.
If your device requests a password, enter the default
password 0 0 0 0 . Refer to the user’s manual for
your specic device for specic instructions on
pairing to Bluetooth devices.
3. When successfully paired, an audible chime will
sound and the LED indicator will slowly ash
blue. Audio from the connected Bluetooth device
should now be heard through the earbuds, use
the controls on the connected Bluetooth device
to select and play audio.
After initial pairing, the unit will stay paired unless
unpaired manually by the user or erased due to a reset
of the device. Repeat these steps if your device should
become unpaired or will not connect normally.
Playing Audio Wirelessly
1. If the unit is OFF and has already been paired to a
Bluetooth device, press and hold the Play/Pause/
Speakerphone/Pair button for approximately
5-6 seconds until it automatically connects to
your device. An audible chime will sound and the
LED indicator will turn solid blue.
2. Use the controls on the connected Bluetooth
device to select and play audio.
3. To play or pause audio, press the Play/Pause
button or use the controls on the connected
Bluetooth device.
Using the Speakerphone
1. To accept a call, press the Speakerphone button
or use the controls on the connected phone.
2. To end a call, press the Speakerphone button or
use the controls on the connected phone.
3. To re-dial the last dialed number, press the
Speakerphone button twice.