iLive Wave ISB273B User manual

• User’s Guide
• MicroUSB to USB charging cable
• Aux cable (3.5mm cable)
Features
Wave Wireless Speaker System
User’s Guide for Model ISB273B v3045
• Bluetooth wireless - range 60 ft.
• Party +: Connect to another ISB273 speaker
• Voice prompts announce speaker functions
• LED light eects
• Bass Boost
• Microphone Input
• 3.5mm Aux in
• MicroSD card slot
• USB port – supports MP3 le format
• Carry handle
• Built-in rechargeable battery
• Battery life: approx. 5 hours at 50%
Controls and Functions
11
79 108
6
54
32
1. Lights: Press to cycle through LED light eects. Press and hold 5
seconds to turn Voice Prompts on/o.
2. Mode/Bluetooth: Press to switch between Bluetooth, Aux, USB, and
MicroSD. Press and hold for 3 seconds to activate Party + Mode.
3. Vol -/Previous: Press to decrease volume. Press and hold to return to
previous track.
4. Play/Pause: Press to play or pause tracks. Press and hold for 3 seconds
to disconnect Bluetooth.
5. Vol +/Next: Press to increase volume. Press and hold to skip to next
track.
6. Bass: Press to turn Bass Boost feature on/o.
13
Top Controls Back Inputs
Bluetooth Wireless
Pairing & Playing Audio
1. When powered on, the speaker will enter Bluetooth Mode
automatically. If you are playing from a dierent source, press the
Mode button to select Bluetooth Mode.
2. Using the Bluetooth setting on your device, search for new devices
and select ISB273. Refer to the user’s manual for your specic device for
instructions on pairing and connecting Bluetooth devices.
3. When successfully paired, a voice prompt will announce the
connection.
4. Use the controls on the connected device to select and begin playing
audio. Use the controls on the speaker or the connected device to play,
pause, and adjust volume.
Note: The speaker will automatically connect to the last paired device when
powering on. If your device becomes unpaired or it is unable to connect, press
and hold the Play/Pause/Pair button for 3 seconds to enter pairing mode. A
voice prompt will announce “Bluetooth is connecting” start from step two to
connect to your device.
Charging the Battery
To power the unit or charge the internal battery, connect the DC Power
Input on the speaker to a powered-on computer or standard power outlet
using an UL certied AC/DC power adapter (not included).
After charging, unplug charging cable from the speaker. You can play music
and operate the speaker normally during charging.
Party + Mode
Pair two ISB273 speakers wirelessly to double the audio from your Bluetooth
device.
1. After powering on, press and hold the Mode button for 3 seconds
to enter Party + mode. When connected, you will hear a notication
sound.
2. Using the Bluetooth setting on your device, search for new devices and
select ISB273.
3. To exit Party + Mode, press and hold the Mode button for 3 seconds on
either speaker.
Note: When powered o while paired, the two speakers will reconnect again
after powering on.
Includes
Overview
1
7. Power On/O
8. Aux In (3.5mm Input).
9. MicroSD Card Slot
10. USB Port
11. Microphone Input
12. LED Charging Indicator
13. DC Power Input: Use to charge the internal battery and power the
speaker. Charge time is approximately 4 hours.
12
ISB273_IB_draft_1312023.indd 1ISB273_IB_draft_1312023.indd 1 31/1/2023 9:19:4431/1/2023 9:19:44

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la
sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: par[email protected]
Copyright © 2023 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without notice.
Customer Support
Protect for Today
Sustain for Tomorrow
Made
Green
Aux In
Requires a 3.5mm audio cable (included).
1. Connect a 3.5mm audio cable to the Aux In on the speaker and the
audio output/headphone jack on an audio device.
2. The speaker will automatically to switch to Aux in mode.
3. Use the controls on the connected device to select and play audio.
Using a Microphone
To use a microphone (not included), plug one end of a microphone cable into
your microphone and plug the other end of the cable into the Microphone
Input.
To detach the microphone, turn down the speaker volume and unplug the
microphone cable from the speaker, then detach the microphone from the
cable.
Important Safety Instructions
• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that
produce heat.
• Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong
are provided for your safety. When the provided plug does not t into your outlet, consult an electrician for replacement
of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
FCC Warnings
Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure
condition without restriction.
Additional Warnings and Precautions
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect
the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
• WARNING: Shock hazard - Do Not Open.
• CAUTION: Use of controls or adjustments or performance of procedures other than those specied may result in
hazardous radiation exposure.
• WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
• WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive nish. As
with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend
using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage
and/or staining.
• WARNING: Do not ingest battery, chemical burn hazard.
• Battery shall not be exposed to excessive heat such as sunshine, re or the like.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state
and local guidelines. They should never be disposed of in normal household waste and they should never be incinerated,
as they might explode. Contact your local government for disposal or recycling practices in your area.
WARNING: To reduce the risk of electric
shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to
qualied service personnel.
WARNING: This product can expose you to
chemicals including lead, which is known to the
State of California to cause cancer. For more
information go to: www.P65Warnings.ca.gov
This product meets and complies with required
Federal product guidelines.
ATTENTION
RISQUE D' ÉLECTROCUTION
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
This symbol indicates that this product
incorporates double insulation between hazardous
mains voltage and user accessible parts.
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of un-insulated
“dangerous voltage” within the product’s
enclosure that may be of sufcient magnitude to
constitute a risk of electric shock to persons.
USB Drive & MicroSD Input
1. Load a USB drive or a Micro SD card into the appropriate media port.
2. The speaker will automatically switch to USB or SD mode.
3. Use the controls on the speaker to select and play and pause audio
from the connected drive.
ISB273_IB_draft_1312023.indd 2ISB273_IB_draft_1312023.indd 2 31/1/2023 9:19:4531/1/2023 9:19:45