IMG STAGE LINE CUBE-630/LED User manual

CUBE-630/LED Order No. 38.7710
LED Beam Moving Head
INSTRUCTION MANUAL
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS

-1-
Contents
Introduction & Symbol Instruction ----------------------------------------------------------P2
Safety instructions -------------------------------------------------------------------------------P3
Installation instruction---------------------------------------------------------------------------P4
Ringing & Product specification--------------------------------------------------------------P5
LCD display & MENU operation & Function setting -------------------------------P6-11
Channel Instruction-------------------------------------------------------------------------P12-15
DMX-connection and setting ------------------------------------------------------------P14-16
CUBE-630/LED

-2-
Thank you for your patronage. We are confident that our excellent products and service can satisfy you. For your
own safety, please read this user manual carefully before installing the device.
In order to install , operate, and maintain the lighting safety and correctly. We suggest that the installation and
operation should be done by the verified technician and follow the instruction strictly.
Every person involved with the installation, operation and maintenance of this device has to:
-be qualified
-follow carefully the instructions of this manual
Introduction
Thank you for having chosen this professional moving head. You will see you have acquired a powerful and versatile
device.
Unpack the device. Inside the box you should find:
1. One DMX connection cable
2. One quick lock handle
3. One use manual
4. One power cable:
Please check carefully that there is no damage caused by transportation. Should there be any, consult your local
dealer
Symbol Instruction On The Device
…………………………………………………………… CE Certificate
………
……………………………………………………………
……………………………………………………
………………………………
Suitable directly installed on the common combustible materials devices
Only indoor using
Environmental protection
The minimum distance from lighted objects(meter)
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
CAUTION
Be careful with your operations. With a dangerous voltage you can suffer a
dangerous electric shock when touching wires!
CUBE-630/LED

Safety Instructions
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation,
it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual.
►If the device has been exposed to temperature changes due to environmental changes, do not switch it on
immediately. The arising condensation could damage the device. Leave the device switched off until it has reached
room temperature.
►Please make sure that the device be earthed.
►Please replace housing if it is broken. This fixture can be using after finished installed.
►The electric connection must carry out by qualified person.
►Make sure that the available voltage is not higher than stated at the end of this manual.
►Make sure the power cord is never crimped or damaged by sharp edges. If this would be the case, replacement of
the cable must be done by an authorized dealer.
►If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
►Please cut off the power if don't use the fixture or want to clean, maintenance.
Please be aware that damages caused by manual modifications to the device are not subject to warranty.
Keep away from non-professionals.
General Guidelines
►This device is a lighting effect for professional use on stages, in discotheques, theaters, etc., the device was
designed for indoor use only.
►This fixture is only allowed to be operated with the max alternating current which stated in the technical
specifications in the last page of this manual.
►The device can do continuous work for eight hours. Lighting effects are not designed for permanent operation.
Consistent operation breaks may ensure that the device will serve you for a long time without defects.
Warning!
Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defects or problems.
CUBE-630/LED
-3 -

-4-
►Handle with care, do not make the device by strong shocks.
While choosing the installation-spot, please make sure that the device is not exposed to extreme heat, moisture or
dust. Please don't project the beam onto combustible substances.The minimum distance between light-output from
the projector and the illuminated surface must be more than 1 meter.
►Please do not in damp, overheat or dusty environment install and use the device. Do not use light on fuel. The
distance between the device and the projectile to keep at least 1 meter.
►If you use the quick lock cam in hanging up the fixture, please make sure the quick lock fasteners turned in the
quick lock holes correctly.
►Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation.
►Please use the original packaging if the device is to be transported.
►For safety reasons, please be aware that all modifications on the device are forbidden.
►If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to short-circuit, burns,
electric shock, lamp explosion, crash, etc.
Installation Instruction
►The applicable temperature for the lighting is between -25°C to 45°C. Do not use the lighting under or above the
temperature.
►The installation of the effect has to be built and constructed in a way that it can hold 10 times the weight for 1 hour
without any harming deformation.
►The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety
rope.Never stand directly below the device when mounting, removing or servicing the fixture.
►The operator has to make sure the safety relating and machine technical installations are approved
by an expert before taking the device into operation for the first time.
►These installations have to be approved by a skilled person once a year.
►Overhead mounting requires extensive experience, including amougst others calculating working load limits,
installation material being used, and periodic safety inspection of all installation material and the device. If you lack
these qualifications, do not attempt the installation yourself. Improper installation can result in bodily injury.
CAUTION!
Please consider the EN60598-2-17 and the other respective national norms during the
installation. The installation must only be carried out by a qualified person.
CUBE-630/LED

-5-
Ringing
Insert the quick-lock fasteners of the first holder into the respective holes on the bottom of the device.Tighten the
quick-lock fasteners fully clockwise.
Make the finished installed mounting bracket tighten on the fixed bracket.
Pull the safety rope through the holes on the bottom of the base and over the trussing system or other safe fixation
spot.
Note:This step is quite important to ensure that fixture will not drop out by the damage of clamp.
Product specification
●6* 30W RGBW 4in1 LED；
●LED average lifetime over 50000 hours, low power consumption
●DMX channel：15/37CH
●Control mode ：master/slave, auto, DMX, sound
●standard beam angle：8º ，standard spot angle：4º, 900lum @5M
●Pan: 630º/540°, TILT: 200º
●360º infinite tilt
● Electrical strobe 1~25Hz；
●Electrical dimming：0%~100%；
●10 built-in programs for auto display or controlled by DMX controller
●can edit program via DMX controller and front display, and save the programs in CPU of the fixture.
● 3Pin DMX connector, LCD display:
● Input voltage：AC100 ~240V 50/60Hz
● Product dimension：247.0*236.0*370.0 mm
CUBE-630/LED
Handing bracket
Safety-rope
Rapid
locking hook

-6-
LCD display
LCD operation
Main menu Sub-menu Function
Menu
DMX address Set address code Address 001~512
Operate Mode
Channel 15Channel
37 Channel
Mast Mode Alone-Mode
Host-Mode
Auto Mode
Auto0
Auto1
Auto2
Auto3
Auto4
Sound Control 000~099%
Manual test
PAN
TIL
Red1
Gren1
Blue1
White1
Red2
Gren2
Blue2
White2
Red3
Gren3
Blue3
White3
Red4
Gren4
1：（MENU）
2：（DOWN）
3：（UP）
4：（ENTER）
5：Display
CUBE-630/LED

Blue4
White4
Red5
Gren5
Blue5
White5
Red6
Gren6
Blue6
White6
System Setting
Pan Reverse YES
NO
Pan fine Adjust 000~255
Tilt fine Adjust 000~255
Pan Angle Choose Pan Angle 630
Pan Angle 540
Display back Light YES
NO
DMX Lost
Hold
Blac
Soud
Auto
Encoder YES
NO
Reset
Default
Status Info
Software Version V1.2
Operate Time xxx(H)
Working Temperature xxx°
MENU operation
This fixture has 4 keys on front panel for operation, press these to set address, reset, edit and run programs and so on.
[MENU]: press MENU key to enter edit status, in edit status, if press MENU again, it will return the upper interface. If
no operation 30 seconds after enter edit status, the fixture will exit the edit status automatically.
[Up]: press UP key, the indicator will flash, the address increases one by one, if hold the key continuously, the
address will increase rapidly. If no press within 30 seconds, the indicator stops flashing and exit it.
In edit status, press UP key, it will display the options circularly from down to up.
[Down]：press DOWN key, the indicator will flash, the address decreases one by one, if hold the key continuously, the
address will decrease rapidly. If no press within 30 seconds, the indicator stops flashing and exit it.
-7 -
CUBE-630/LED

-8-
In edit status, press DOWN key, it will display the options circularly from up to down.
[ENTER]：in normal status, no function to press ENTER. In edit mode, press ENTER to enter lower interface.
Function setting
1）DMX address setting
1．Press MENU to enter EDIT interface
2. Press UP/DOWN to choose, then pres ENTER to enter Address setting
3．Press Up/Down to choose address 001~XXX
4．press ENTER to confirm, or press "MENU" to exit
2）Operate Mode Setting
a）Channel mode setting
1. Press MENU to enter EDIT interface
2. Press UP/DOWN to choose, then pres ENTER to enter 【Operate mode】
3. Press UP/DOWN to choose, then pres ENTER to enter 【channel value】
4. Press UP/DOWN to choose each channel.‘15CH’/‘37CH’
5. Press ENTER to confirm, or press "MENU" to exit
b）Master-slave setting
1. Press MENU to enter EDIT interface
2. Press UP/DOWN to choose, then pres ENTER to enter 【Operate mode】
2. Press UP/DOWN to choose, then pres ENTER to enter 【Mast Mode】
4. Press UP/DOWN to choose Master/Slave.
5. Press <Enter> to confirm, save and exit.
c）Run built-in program by auto control (before this setting, please Press MENU into to <System setting> then to
<DMX Lost> to select <Auto> and save, user should be in Auto Mode first, the different Auto Effect Shows can be
selected)
1. Press MENU to enter EDIT interface
2. Press UP/DOWN to choose, then pres ENTER to enter 【Operate mode】
2. Press UP/DOWN to choose, then pres ENTER to enter 【Auto Mode】
4. Press <Up/Down>, <Enter> to choose the build-in program
5. Press <Enter> to confirm, save and exit.
d）Set sound sensitivity (before this setting, please Press MENU into <System setting> then to <DMX Lost> to select
<Sound> and save, user should be in Sound Mode first, the different Sound sensitivity can be selected)
1. Press MENU to enter EDIT interface
2. Press UP/DOWN to choose, then pres ENTER to enter 【Operate mode】
2. Press UP/DOWN to choose, then pres ENTER to enter 【Sound Mode】
4. Press <Up/Down>, <Enter> to adjust the sound sensitivity from 0%-99%.
5. Press <Enter> to confirm, save and exit.
e）Manual test (it is to test if the function is ok, not to set each function)
1. Press MENU to enter EDIT interface
2. Press UP/DOWN to choose, then pres ENTER to enter 【Operate mode】
2. Press UP/DOWN to choose, then pres ENTER to enter 【Manual control】
3. Press <Up/Down>, to choose【PAN】,【TILT】,【Red1】,【Gren1】,【Blue1】,【Whte1】【Red2】,【Gren2】,
【Blue2】,【White2】【Red3】,【Gren3】,【Blue3】,【White3】【Red4】,【Gren4】,【Blue4】,【White4】【Red5】,
【Gren5】,【Blue5】,【White5】【Red6】,【Gren6】,【Blue6】,【White6】
【PAN】：(1)Press <Enter> into【PAN】
CUBE-630/LED

-9-
(2) Press <Up/Down> to choose ‘P000~P255’
(3) Press <Enter> to confirm, save and exit.
【TIL】： (1)Press<Enter> into【TIL】
(2) Press<Up/Down> to choose ‘T000~T255’
(3) Press <Enter> to confirm, save and exit.
【Red1】：(1)Press <Enter> into【Red】
(2) Press <Up/Down> to choose ‘R000~R255’
(3) Press <Enter> to confirm, save and exit.
【Gren1】:(1)Press<Enter> into【Green】
(2) Press <Up/Down>, Choose ‘G000~G255’
(3) Press <Enter> to confirm, save and exit.
【Blue1】：(1)Press <Enter> into【Blue】
(2)Press<Up/Down> choose ‘B000~B255’
(3)Press <Enter> to confirm, save and exit.
【White1】：(1)Press <Enter> into【White】
(2) Press <Up/Down> choose ‘W000~W255’
(3) Press <Enter> to confirm, save and exit.
【Red2】：(1)Press <Enter> into【Red2】
(2) Press <Up/Down> to choose ‘R000~R255’
(3) Press <Enter> to confirm, save and exit.
【Gren2】:(1)Press<Enter> into【Gren2】
(2) Press <Up/Down>, Choose ‘G000~G255’
(3) Press <Enter> to confirm, save and exit.
【Blue2】：(1)Press <Enter> into【Blue2】
(2)Press<Up/Down> choose ‘B000~B255’
(3)Press <Enter> to confirm, save and exit.
【White2】：(1)Press <Enter> into【White2】
(2) Press <Up/Down> choose ‘W000~W255’
(3) Press <Enter> to confirm, save and exit.
【Red3】：(1)Press <Enter> into【Red3】
(2) Press <Up/Down> to choose ‘R000~R255’
(3) Press <Enter> to confirm, save and exit.
【Gren3】:(1)Press<Enter> into【Green3】
(2) Press <Up/Down>, Choose ‘G000~G255’
(3) Press <Enter> to confirm, save and exit.
【Blue3】：(1)Press <Enter> into【Blue3】
(2)Press<Up/Down> choose ‘B000~B255’
(3)Press <Enter> to confirm, save and exit.
【White3】：(1)Press <Enter> into【Whte3】
(2) Press <Up/Down> choose ‘W000~W255’
(3) Press <Enter> to confirm, save and exit.
【Red4】：(1)Press <Enter> into【Red4】
(2) Press <Up/Down> to choose ‘R000~R255’
(3) Press <Enter> to confirm, save and exit.
【Gren4】:(1)Press<Enter> into【Gren4】
(2) Press <Up/Down>, Choose ‘G000~G255’
(3) Press <Enter> to confirm, save and exit.
【Blue4】：(1)Press <Enter> into【Blue4】
CUBE-630/LED

-10 -
(2)Press<Up/Down> choose ‘B000~B255’
(3)Press <Enter> to confirm, save and exit.
【White4】：(1)Press <Enter> into【White4】
(2) Press <Up/Down> choose ‘W000~W255’
(3) Press <Enter> to confirm, save and exit.
【Red5】：(1)Press <Enter> into【Red5】
(2) Press <Up/Down> to choose ‘R000~R255’
(3) Press <Enter> to confirm, save and exit.
【Gren5】:(1)Press<Enter> into【Gren5】
(2) Press <Up/Down>, Choose ‘G000~G255’
(3) Press <Enter> to confirm, save and exit.
【Blue5】：(1)Press <Enter> into【Blue5】
(2)Press<Up/Down> choose ‘B000~B255’
(3)Press <Enter> to confirm, save and exit.
【White5】：(1)Press <Enter> into【White5】
(2) Press <Up/Down> choose ‘W000~W255’
(3) Press <Enter> to confirm, save and exit.
【Red6】：(1)Press <Enter> into【Red6】
(2) Press <Up/Down> to choose ‘R000~R255’
(3) Press <Enter> to confirm, save and exit.
【Gren6】:(1)Press<Enter> into【Gren6】
(2) Press <Up/Down>, Choose ‘G000~G255’
(3) Press <Enter> to confirm, save and exit.
【Blue6】：(1)Press <Enter> into【Blue6】
(2)Press<Up/Down> choose ‘B000~B255’
(3)Press <Enter> to confirm, save and exit.
【White6】：(1)Press <Enter> into【White6】
(2) Press <Up/Down> choose ‘W000~W255’
(3) Press <Enter> to confirm, save and exit.
3）System Setting
a) Pan inverse
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then pres ENTER to enter 【System setting】
3. Press UP/DOWN to choose, then pres ENTER to enter 【Pan Inverse】
4. Press<Up/Down> to choose ‘YES’，/‘NO’
5. Press <Enter> to confirm, save and exit.
b) Pan fine adjust setting
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then pres ENTER to enter 【System setting】
3. Press UP/DOWN to choose, then pres ENTER to enter 【Pan adjust】
4. Press<Up/Down> to choose ‘000-255’
5. Press <Enter> to confirm, save and exit.
c）Tilt fine adjust setting
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then pres ENTER to enter 【System setting】
3. Press UP/DOWN to choose, then pres ENTER to enter 【Tilt adjust】
4. Press<Up/Down> to choose ‘000-255’
CUBE-630/LED

-11 -
5. Press <Enter> to confirm, save and exit.
d）Pan angle setting
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then pres ENTER to enter 【System setting】
3. Press UP/DOWN to choose, then pres ENTER to enter 【Pan Angle Choose】
4. Press<Up/Down> to choose ‘630’，/‘540’
5. Press <Enter> to confirm, save and exit.
e）Display back light setting
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then pres ENTER to enter 【System setting】
3. Press UP/DOWN to choose, then pres ENTER to enter 【Display BK light】
4. Press<Up/Down> to choose ‘ON’，/‘OFF’
5. Press <Enter> to confirm, save and exit.
f）No DMX signal setting
1. press MENU to enter EDIT interface
2. press UP/DOWN to choose, then pres ENTER to enter 【System setting】
3. press UP/DOWN to choose, then pres ENTER to enter 【DMX Lost】
4. press UP/DOWN to choose‘ hold (hold the current status), black(no light output), sound(run sound
mode),auto(run auto programs).
5. press ENTER to confirm, or press "MENU" to exit
g）Encoder setting
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then pres ENTER to enter 【System setting】
3. Press UP/DOWN to choose, then pres ENTER to enter 【Enco】
4. Press<Up/Down> to choose ‘YES’，/‘NO’
5. Press <Enter> to confirm, save and exit.
h）Whole reset
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then pres ENTER to enter 【System setting】
3. Press UP/DOWN to choose, then pres ENTER to enter 【Reset】
4. Press<Up/Down> to reset all
5. After reset, it will go back to the upper interface
i）Restore factory settings
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER to enter 【System setting】
3. Press UP/DOWN to choose, then press ENTER to enter 【Default setting】
4. Press<Up/Down> to restore factory settings
5. After reset, it will go back to the upper interface
4. Information state
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then pres ENTER to enter 【status information】
3. Press UP/DOWN to choose Software Version, Operate time, temp
【Software Version,】：(1) Press ENTER to enter 【Vers】
(2) Press UP/DOWN, then press ENTER to check the light’s version information
(3) Press <Enter> to confirm, save and exit.
【Operate time】：(1)Press ENTER to enter 【Time】
(2) Press UP/DOWN, then press ENTER to check the light’s working time xxx(H)
CUBE-630/LED

-12 -
(3) Press <Enter> to confirm, save and exit.
【Temp】：(1)Press ENTER to enter【Temp】
(2)Press UP/DOWN, then press ENTER to check the light’s working temperature xxxº
(3) Press <Enter> to confirm, save and exit.
Channel Instruction
15 Channel
Channel Value Function
CH1 Pan 000-255 Pan 0-630°
CH2 Tilt 000-255 Tilt 0-200°
CH3 Infinite tilt
000-030 Stop
031-140 Anticlockwise,from fast to slow
141-145 Stop
146-255 Clockwise from slow to fast
CH4 Speed
000-225 Speed from fast to slow
226-255 Maximum speed
CH5 Red 000-255 Red(0-100%)
CH6 Green 000-255 Green(0-100%)
CH7 Blue 000-255 Blue(0-100%)
CH8 White 000-255 White(0-100%)
CH9 Strobe
000-015 No Function (open)
016-095 Strobe （1HZ-25Hz Slow-Fast）
096-169 Strobe （1Hz Fast-Slow）
170-175 Strobe （1Hz Slow-Fast）
176-255 Random Strobe (Slow-Fast)
CH10 Dimmer 000-255 Master Dimmer 0-100%
CH11 LED strip program
000-036 No Function
037-056 Red
057-077 Green
078-098 Blue
099-119 R&G
120-140 R&B
141-161 G&B
162-176 R&G&B
177-186 RGB Change
187-196 Red-Chase
197-206 Green-Chase
207-216 Blue-Chase
217-226 R&G-Chase
CUBE-630/LED

-13 -
227-236 R&B-Chase
237-246 G&B-Chase
247-255 R&G&B-Chase
CH12 Programs
000-015 No Function
016-063 Auto 0
064-111 Auto 1
112-159 Auto 2
160-207 Auto 3
208-255 Auto 4
CH13 Color Macro
000-045 No Function
046-065 Red
066-085 Green
086-105 Blue
106-125 White
126-145 R&G
146-165 R&B
166-185 G&B
186-205 R&G&B&W
206-255 RGB Change Fast-Slow
CH14 LED Strips speed 000-255 From slow to fast
CH15 Rest
000-030 No Function
031-049 Whole Reset
50-255 No Function
37 Channel
Channel Value Function
CH1 PAN 000-255 Pan 0-630°
CH2 PAN Fine 000-255 Pan fine
CH3 Tilt 000-255 Tilt 0-200°
CH4 Tilt Fine 000-255 Pan fine
CH5 Infinite tilt
000-030 Stop
031-140 Anticlockwise,from fast to slow
141-145 Stop
146-255 Clockwise from slow to fast
CH6 Speed 000-225 Speed from fast to slow
226-255 Maximum speed
CH7 Red1 000-255 Red(0-100%)
CH8 Green1 000-255 Green(0-100%)
CH9 Blue1 000-255 Blue(0-100%)
CH10 White1 000-255 White(0-100%)
CH11 Red2 000-255 Red(0-100%)
CUBE-630/LED

-14 -
CH12 Green2 000-255 Green(0-100%)
CH13 Blue2 000-255 Blue(0-100%)
CH14 White2 000-255 White(0-100%)
CH15 Red3 000-255 Red(0-100%)
CH16 Green3 000-255 Green(0-100%)
CH17 Blue3 000-255 Blue(0-100%)
CH18 White3 000-255 White(0-100%)
CH19 Red4 000-255 Red(0-100%)
CH20 Green4 000-255 Green(0-100%)
CH21 Blue4 000-255 Blue(0-100%)
CH22 White4 000-255 White(0-100%)
CH23 Red5 000-255 Red(0-100%)
CH24 Green5 000-255 Green(0-100%)
CH25 Blue5 000-255 Blue(0-100%)
CH26 White5 000-255 White(0-100%)
CH27 Red6 000-255 Red(0-100%)
CH28 Green6 000-255 Green(0-100%)
CH29 Blue6 000-255 Blue(0-100%)
CH30 White6 000-255 White(0-100%)
CH31 Strobe
000-015 No Function (open)
016-095 Strobe （1Hz-25Hz Slow-Fast）
096-169 Strobe （1Hz Fast-Slow）
170-175 Strobe （1Hz Slow-Fast）
176-255 Random Strobe (Slow-Fast)
CH32 Dimmer 000-255 Master Dimmer 0-100%
CH33 LED strip auto
program
000-036 No Function
037-056 Red
057-077 Green
078-098 Blue
099-119 R&G
120-140 R&B
141-161 G&B
162-176 R&G&B
177-186 RGB Change
187-196 Red-Chase
197-206 Green-Chase
207-216 Blue-Chase
217-226 R&G-Chase
227-236 R&B-Chase
237-246 G&B-Chase
247-255 R&G&B-Chase
CH34 Programs 000-015 No Function
016-063 Auto 0
CUBE-630/LED

-15 -
064-111 Auto 1
112-159 Auto 2
160-207 Auto 3
208-255 Auto 4
CH35 Color Macro
000-045 No Function
046-065 Red
066-085 Green
086-105 Blue
106-125 White
126-145 R&G
146-165 R&B
166-185 G&B
186-205 R&G&B&W
206-255 RGB Change Fast-slow
CH36 LED Strips speed 000-255 From slow to fast
CH37 Rest
000-030 No Function
031-049 Whole Reset
50-255 No Function
DMX-512 control connection
Connect the provided XLR cable to the male 3-pin XLR output of your controller and the other side to the female
3-pin XLR input of the light.You can chain multiple lights together through serial linking
The cable needed should be two core, screened cable with XLR input and output connectors. Please refer to the
diagram below.
DMX address setting
Each fixture must set a specific starting address. When receiving signal transmission, fixture will receive channels
control signals which from the starting address.
According to different requirements or easy to use, the user can set many fixtures to the same address, also can set
up a separately address for every device.
XLR Mounting socket XLR Mounting plug
CUBE-630/LED

-16 -
If more than one fixtures set to the same address, all of them receive from DMX channels signal. All connections
fixtures are jointly controlled, controller can't separate control a device.
If each device set to a different address, each device will be separate from its particular set the starting address and
began accepting DMX512 control signal, so that more convenient separate control one of device. Using this method
must be based on channel quantity of device to determine a starting address.
This device have 37 channels, so the first device starting address set 1, second is 38(1+37), third is 75(38+37) and
so on.
Cleaning and maintenance
Cleaning should be performed every 15-day period, by using a sponge which is dipped with alcohol, rather
than wet cloth or other chemical liquid, to clean the mirror.
Attention
Do not see directly light source when open the light, and make sure power off before do any installation or
maintenance.
Cut off power before cleaning and maintenance!
CAUTION
Wires connection must be done professional person!
CAUTION
DMX Address 75 DMX Address 38 DMX Address 01
CUBE-630/LED

CUBE-630/LED
Notes
-17 -

MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
www.monacor.com 01.12.01.2016