IMP De Mayo Knee Positioner User manual

De Mayo Knee & De Mayo D2Knee Positioner®
“Spring Loaded” Stainless Steel Handle
Instructions For Use
1. With the Handle all the way
to the Left (counterclockwise),
place the patient’s foot and boot
into the carriage.
Turning the E-Brake clockwise
until tight will prevent the
carriage from moving.

SS Handle I F U pg.2
2. Rotate the Handle to the
Right (clockwise),
until it is finger tight.
3. To reposition the Handle
while in the locked position,
pull the Handle towards you
creating a “gap” and while
pulling on the Handle,
rotate the Handle
counterclockwise
to the 2:00 o’clock
position and release.

SS Handle I F U pg.3
4. To unlock the carriage, turn
the E-Brake counterclockwise,
then rotate the stainless
steel Handle all the way to the
Left.
5. If the carriage has been over
tightened, pull the stainless steel
Handle towards you,

De Mayo Knee Positioner®is a registered trademark of Innovative Medical Products, Inc.
De Mayo D2Knee Positioner®is a registered trademark of Innovative Medical Products, Inc.
U.S. Patent No. 7,380,299
© August 2016 ALL RIGHTS RESERVED
SS Handle pg. 4
Set Up Test Procedure
1. Check to ensure Handle will lock the
carriage once the boot is inserted by rotating
it clockwise. Check to ensure the Handle
will release the boot by rotating it
counterclockwise.
1
and while pulling, rotate the
Handle clockwise half a
turn to the Right
and release the Handle.
NOTE: Follow Step 4 to unlock the Handle and Carriage.