Imperial Attica XM83400100 User manual

Important Information:
Please check the products for transport damage and that contents are complete before
installation.
Consult a qualied plumber if you have any problems installing this product.
Complaints made following installation regarding the above cannot be accepted.
INSTRUCT158
REV170123/CM
Mounting Instructions for
Attica Drench Shower Head 2 way (XM83400100)
and Attica Drench Shower Head (XM83400100)

Package Contents Attica Drench Shower Head 2 way (XM83400100)
2 of 16
10 mm
x1
x1
x1
x1
x1
x1
x2
x2
x2
x4
GB
FR
Mounting instructions
Instructions de montage

Attica Drench Shower Head (XM83400100)
3 of 16
|  |
|  |
 
X
X + ~40 c m
RAIN
FAL L
Bar 0,5 1 1,5 2 2,5 3 3,5 4 4,5 5
6,3 8,9 10,9 12,5 13,1 13,4 13,8 14,1 14,3 14,4
7,5 9,8 11,5 12,2 12,8 13,3 14,8 13,9 14,1 14
(b ar) / (Litri/min)
(Litri/min)
0,5 1 1,5 2 2,5 3 3,5 4 4,5 5
(bar)
400
207
55
192
23
537
165
60
0
2
4
6
8
10
12
14
16
18
20
0,5 1 1,5 2 2,5 3 3,5 4 4,5 5
(bar)
0
2
4
6
8
10
12
14
16
18
20
Pressure
GB
FR GB
FR
advised height of installation
(l/min)
(l/min)
MIN
MAX
BEST
1 Bar
5 Bar
3 Bar
BEST 38 /40 C
l/m waterfall flow
Debit l/m cascade
l/min. rain flow
Debit l/min. pluie

4 of 16
10 mm
GB
FR
Mounting instructions
Instructions de montage
x1
x1
x1
x1
x1
x1
x2
x1
x1
x4
Package Contents Attica Drench Shower Head (XM83400100)

Attica Drench Shower Head (XM83400100)
5 of 16
X
X + ~4 0 c m
RAIN
Bar 0,5 1 1,5 2 2,5 3 3,5 4 4,5 5
7,5 9,8 11,5 12,2 12,8 13,3 14,8 13,9 14,1 14
(b ar) /(Litri/m in)
(Litri/min)
400
55
192
23
537
165
0,5 1 1,5 2 2,5 3 3,5 4 4,5 5
0
2
4
6
8
10
12
14
16
18
20
advised height of installation
GB
FR
Pressure
MIN
MAX
BEST
BEST
1 Bar
5 Bar
3 Bar
38 /40 C
l/min. rain flow
Debit l/min. pluie
(l/min)
(bar)

6 of 16
Installation Guide
45 mm
12
OK
OK
OK
= =
1 1
2
Attica Drench Shower Head 2 Way Attica Drench Shower Head

OK
Min. 15 mm
Max. 30 mm
OK
Min. 15 mm
Max. 30 mm
min. 17 mm
max. 22 mm
3
4 5
7 of 16

ø 10 mm ø 10 mm
ø 10 mm
6

Do not cut water feed nipple.
Revert to setting depth min/max
8 of 16
6 7 8
9
10

9 of 16
12
12
Flush pipe work before fitting shower head assembly
11
12

10 of 16
2,5
13
14

11 of 16
2,5
2,5
15
16

12 of 16
17

13 of 16
Cleaning Attica Drench Shower Head 2 Way
1
2
3

14 of 16
Cleaning Attica Drench Shower Head
1
2
3

15 of 16
Inside Cleaning

16 of 16
Maintenance and Warranty of Product
Important: We remind you that the warranty does not cover damages
caused by deposits of limestone or impurities or if the device has
undergone different treatments from those suggested here.
To Avoid damages to your bathroom or to the purchased equipment,
please observe the following recommendations for use.
- clean the plumbing before connecting the device
- Flush all pipework
- periodically clean the water blade to avoid any limestone
deposits that could compromise good functioning.
Note: The installation of a filter and water-softener system improves and
extends the life of the shower head.
Cleaning of Metal Parts:
For an easy cleaning of the metal parts of the product, simply use a soft
cloth moistened in water and soap.
To avoid spots caused by calcium in water, we advise drying with a cloth
after each use.
Note: Please use only natural soap-based detergents avoiding those with
alcohol, hydrochloric acid and phosphoric acid, bleach, chlorine etc.
and those containg abrasive powders.
The device is covered by 5 years warranty against manufacturing defects.
The warranty does not cover damages caused by:
- different installation and/or use from those suggested by the
operating and maintenance manual.
- Incorrect preparation and implementation of the waterworks.
- Fair ware and tear.
- Damages caused by limestone deposits or impurities.

The Imperial Bathroom Company
England
www.imperial-bathrooms.co.uk
Tel: [phone], Fax: [phone]
Email: [email protected]