Impex Iron Grip Sport GB-7000AP User manual

GB-7000AP Recumbent Bike
IMPEX FITNESS PRODUCTS
14777 Don Julian Rd., City of Industry, CA 91746
Tel: [phone] Fax [phone]
www.impex-fitness.com
[e-mail]
NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Parts Drawing
Screws Pack & Tools
Assembly Instruction
Computer Instruction
Warranty
Ordering Parts
Model
GB-7000AP
Retain This
Manual for
Reference
Dec. 11, 2001
OWNER'S
MANUAL

TABLE OF CONTENTS
BEFORE YOU BEGIN.......................................................................................................1
IMPORTANT SAFETY NOTICE........................................................................................2
PARTS DRAWING………..............................................................................................…3
SCREWS PACK & TOOLS….........................................................................................…4
ASSEMBLY INSTRUCTION….……………….....................................................................5
COMPUTER…………...................................................................................................….11
FITNESS TIPS..................................................................................................................14
WARRANTY......................................................................................................................18
ORDERING PARTS.....................................................................................................…..18
BEFORE YOU BEGIN
Thank you for selecting the IRON GRIP SPORT GB-7000AP Recumbent Bike
by IMPEX FITNESS PRODUCTS. For your safety and benefit, read this
manual carefully before using the machine. As a manufacturer, we are
committed to provide you complete customer satisfaction. If you have any
questions, or find there are missing or damaged parts, we guarantee you
complete satisfaction through direct assistance from our factory. To avoid
unnecessary delays, please call our TOLL-FREE customer service number.
Our Customer Service Agents will provide immediate assistance to you.
1
Toll-Free Customer Service Number
1-800-999-8899
Mon. - Fri. 9 a.m. - 5 p.m. PST
www.impex-fitness.com
[email protected]m

IMPORTANT SAFETY NOTICE
PRECAUTIONS
This exercise machine is built for optimum safety. However, certain precautions
apply whenever you operate a piece of exercise equipment. Be sure to read the
entire manual before you assemble or operate your machine. In particular, note the
following safety precautions:
1. Keep children and pets away from the machine at all times. DO NOT
leave children unattended in the same room with the machine.
2. Only one person at a time should use the machine.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, STOP the workout at once. CONSULT A PHYSICIAN
IMMEDIATELY.
4. Position the machine on a clear, leveled surface. DO NOT use the machine
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the machine. Running
or aerobic shoes are also required when using the machine.
7. Use the machine only for its intended use as described in this manual.
DO NOT use attachments not recommended by the manufacturer.
8. Do not place any sharp object around the machine.
9. Disabled person should not use the machine without a qualified person or
physician in attendance.
10. Before using the machine to exercise, always do stretching exercises to
properly warm up.
11. Never operate the machine if the machine is not functioning properly.
12. Maximum Weight – 250 LBS
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE
OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES
NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED
BY OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.
2

PARTS DRAWING:
NO. DESCRIPTION Q'TY NO. DESCRIPTION Q'TY
1 MAIN FRAME 1 PCE 11 PEDAL STRAP (L) 1 PCE
2 FRONT HANDLE 1 PCE 12 PEDAL (L) 1 PCE
3 COMPUTER POST 1 PCE 13 PEDAL STRAP (R) 1 PCE
4 COMPUTER 1 PCE 14 PEDAL (R) 1 PCE
5 SEAT BRACKET 1 PCE 15 REAR STABILIZER 1 PCE
6 SEAT 1 PCE 16 SCREW PACK 1 PCE
7 BACKREST BOARD 1 PCE 17 END CAP FOR TRACK 1 PCE
8 REAR HANDLE 1 PCE 18 WATER BOTTLE 1 PCE
9 SEAT ADJUST KNOB 1 PCE 19 BOTTLE FRAME 1 PCE
10 RUBBER CUSHION 2 PCE
3

SCREW PACK & TOOLS:
Following are the nuts and bolts needed to assembly the machine.
Before start assembling, please check the quantity to make sure all
included.
4

ASSEMBLY:
STEP 1:
Attach the REAR STABILIZER (#15) to the
MAIN FRAME (#1). Securely tighten it with two
CARRIAGE BOLTS, WASHERS AND NUTS.
STEP 2:
Insert the computer sensor wire and hand pulse
sensor wire from the MAIN FRAME (#1) through
the COMPUTER POST (#3). Make sure the
wires come out of the post from the top. Slide
the COMPUTER POST into the post holder on
the MAIN FRAME.
STEP 3:
Securely tighten the COMPUTER POST (#3)
with three ALLEN KEY BOLTS.
5

STEP 4:
Use the screwdriver to remove the two Bottle
Frame screws on the COMPUTER POST (#3).
STEP 5:
Attach the BOTTLE FRAME (#19) onto the
COMPUTER POST (#3) and securely tighten it
with the two screws. Place the WATER BOTTLE
(#18) into the BOTTLE FRAME.
STEP 6:
Remove the four screws from the back of the
COMPUTER (#4).
6

STEP 7:
Connect the computer sensor wire and hand
pulse sensor wire to the jack on the back of the
COMPUTER. Attach the COMPUTER (#4)
onto the COMPUTER POST (#3) and securely
tighten it with the four screws.
STEP 8:
Attach the FRONT HANDLE (#2) onto the back
of COMPUTER POST (#3). Securely tighten it
with four ALLEN KEY BOLTS.
STEP 9:
Attach the SEAT (#6) to the SEAT BRACKET
(#5). Securely tighten them with four ALLEN KEY
BOLTS.
7

STEP 10:
Slide the SEAT BRACKET (#5) onto the
aluminum track on the MAIN FRAME (#1).
Attach the BACKREST BOARD (#7) to the
SEAT BRACKET at the front. Then attach the
BACKREST BOARD COVER to the SEAT
BRACKET at the back. Align the four holes
and secure them with four ALLEN KEY BOLTS.
STEP 11:
Attach the SEAT ADJUSTMENT KNOB (#9)
onto the right side of SEAT BRACKET (#5).
STEP 12:
Insert the hand pulse sensor wire on the REAR
HANDLEBAR (#8) through the hole on the
SEAT BRACKET (#5) into the Aluminum track
on the MAIN FRAME (#1).
8

STEP 13:
Pull the hand pulse sensor wire out from the end
of the aluminum track on the MAIN FRAME (#1).
STEP 14:
Attach the REAR HANDLEBAR (#8)to the
SEAT BRACKET (#5). Securely tighten it with
four ALLEN KEY BOLTS.
STEP 15:
Locate a Hook attached to the end of the
aluminum track. Pull the sensor jack out from
the aluminum track by using the hook. Connect
the hand pulse sensor wire to the jack then push
the sensor wire back into the aluminum track.
9