
Your complete animal imaging solution
Easi-Scan
Quick Guide
Note: All IMV imaging products are to be used
for animal applications only.
Care instructions
The Easi-Scan will be damaged if you:
• Drop it
• Hose it down
• Leave it wet
For a long and happy life:
• Clean immediately after use - before any
debris dries. Use antibacterial wipes to
reduce the need for drying.
• Thoroughly dry the scanner and the battery
before storage or charging.
• Once a fortnight discharge until scanner
automatically switches off, followed by a
complete charge for improved battery life.
• Do not store scanner for extended periods
without occasional exercise.
• Avoid knocking the probe head to prevent
damage to crystal array.
• Avoid iodine based solutions for disinfecting
the scanner.
Specications
The Easi-Scan meets all the essential and safety
requirements of all current relevant European
Directives.
The CE mark on the front label is a symbol of
this conformance. If you require any further
information regarding these directives please
contact us directly. This product is classed as
electronic equipment. At the end of its useful
life it should not be disposed of with general
waste, it should be taken to a recycling point for
electrical/electronic equipment. The crossed-out
wheelie bin symbol is placed on the front label
as a reminder and in conformance with the
European WEEE Directive.
Frequency: Easi-Scan: 4.5 to 8.5 MHZ
Easi-Scan Curve: 3 to 7MHZ
Easi-Scan Microconvex: 5 to
8MHZ
Battery
life:
7 hours with auto standby
mode
Depth
Range:
Easi-Scan / Easi-Scan
Microconvex: 6 – 12cm
Easi-Scan Curve: 8 – 24 cm
Environmental
proong:
Scanner and battery dust
and splash proof
Temperature
range:
-10°C to +40°C or
-14°F to +104°F
For more information/ how to videos/
applications support and clinical
resources please visit our website
www.imv-imaging.co.uk
Get in touch now
info@imv-imaging.com
+44 (0) 1506 460023
ireland@imv-imaging.com
+353 (0) 42 932 0070
www.imv-imaging.co.uk
Follow us