infaco Electrocoup F3015 User manual

First use
1. Connect the box to the battery
2. Launch the app and select the box from
the home page.
3. Connect and power on the pruning shears.
F3015
F3020
Prerequisite:
Android 5.1 version minimum
IOS version 13.0 minimum
To use the app and detect the box, activate
geolocation and Bluetooth®on the phone.
For more information, use the following link: https://
my.infaco.com/help or scan the QR code
Items to check:
• Android:
- Activation of the required permissions (if not activated,
an error message is displayed that redirects to the phone
settings);
- In "Battery Optimization" mode, the INFACO®app does
not need to be optimized. This blocks geolocation when
the smartphone is on standby;
- Activation of mobile data for proper pruning tracking
operation.
• IOS: activate all the authorizations required for the
app to run.
Protection of the environment
Observe all country-specific waste disposal rules and
regulations.
>Power tools must not be disposed of with
household refuse.
>The device, accessories and packaging must be
taken to a recycling center.
>Ask the approved INFACO dealer for up-
to-date information on the eco-compatible
elimination of waste.
Precautions for use and safety
- Before starting the working day, make sure the battery
is fully charged (3 LEDs lit on the pruning shears).
- Always disconnect the product from the power cord
when handling for other purposes than pruning.
- Do not leave the product and/or the battery on the
ground, and do not expose them to the elements.
- Make sure the battery’s protective plastic casing is not
cracked and does not seem to have suffered impacts
or other aggressions.
- When working, it is normal for the battery temperature
to rise. Recommended operating temperature: -5 to
35°C / 23 to 95°F.
- In wet weather, it is imperative to carry the battery and
the product under waterproof clothing to keep them
protected from the rain.
- After using the tool in the rain or in a damp
environment, it is strongly recommended to store the
(disconnected) device outside its case in a heated and
ventilated place.
- Always keep the cord away from the cutting zone.
Declaration of conformity (EC)
INFACO S.A.S. declares that the new equipment
designated below:
Connected box
Brand name: INFACO
Model: BC3015 / BC3020
Serial number:
Year of manufacture: 20
Complies with the provisions of the following directives:
• "Safety Requirements" (IEC 62368-1-2014)
• “Machinery” (directive 2006/42/EEC)
• "Electromagnetic compatibility" (directive 2004/108/
EEC) and the national legislation enacting them.
• The person authorized to compile the technical file at
INFACO is Mr. Gregory ALVAREZ.
Signed at: CAHUZAC SUR VÈRE
On: 01/01/2023
M. DELMAS Daniel INFACO Managing Director
INFACO undertakes to provide national authorities with
all relevant information concerning the machine.

Safety instructions
For any handling other than pruning, the shears must be
in the closed position, disconnected from the battery and
placed in the battery-holder vest holster.
Caution: when the device is not in use (storage, transport,
end of charging, etc.) is it compulsory to disconnect the
battery from the power cord. It is imperative to disconnect
the pruning shears from the power cord for the following
operations:
• When donning or removing the battery-holder vest.
• When sharpening the blade.
• When fitting, removing or lubricating the blade.
• When changing the cutting head.
• For all operations or repairs on the pruning shears.
• For all operations other than pruning.
Handle the cutting edge of the blade very carefully when
removing and adjusting it.
- When the equipment is in operation, always keep your
hands well away from the cutting head.
- In wet weather, protect the battery. When
disconnecting, make sure that no moisture enters the
battery socket.
- Do not use the equipment if there is a risk of fire or
explosion, for example in the presence of inflammable
liquids or gases.
- Keep the cord away from heat, oil and sharp edges.
- Never use the equipment at night or in poor light
without setting up additional lighting.
- Keep the equipment out of the reach of children or
visitors.
- Keep watch over children to make sure they do not
play with the device.
- The device is not designed to be used by persons
(including children) with reduced physical, sensory
or intellectual capacities, or by any person who does
not have experience or knowledge, unless they have
received prior training or instructions on the use of the
device from a person in charge of their safety.
- If a cord is defective or damaged, it must be replaced
with a genuine cable or set from the INFACO factory or
from an approved INFACO dealer.
- Never make any mechanical alterations to the battery,
harness, charger or connectors.
- Never let the battery or charger come into contact with
water.
- Never expose the battery or the charger to high
temperatures (direct sunlight, heating, etc.) > 140°F.
- Never use chargers, batteries, cords, etc. other than
those sold by INFACO.
- Do not use chemicals to clean the device (pruning
shears, cords, batteries and charger).
- To reduce health risks, INFACO recommends that
people wearing a pacemaker consult a doctor and the
pacemaker manufacturer before using this system.
Regardless of the circumstances and WITH or
WITHOUT the DSES safety system, users must
make sure that the hand not holding the pruning shears
is at least 20 cm / 8 inches away from the tool blade.
For your own safety, protect your hand not
holding the pruning shears using suitable
protection such as hard-shelled gloves or an additional
safety device (DSES) with or without a cord.
INFACO declines all liability for injuries and/or material
damage caused by the use of equipment containing
defective parts.
IMPORTANT INFORMATION ABOUT THE BATTERIES:
- Only use new batteries of the correct size and type.
- Do not mix new batteries with used batteries, different
types of batteries (standard zinc and carbon, alkaline,
rechargeable) or rechargeable batteries of different
capacities.
- Always charge rechargeable batteries under adult
supervision.
- Observe the correct polarity, (+) and (-).
- Do not attempt to recharge non-rechargeable
batteries.
- Do not crush the batteries
- Do not dispose of batteries by attempting to burn
them.
- Replace all batteries of the same type and brand at
the same time.
- Do not short-circuit the terminals.
- Batteries must be replaced by an adult.
- Batteries must be recycled or disposed of in accordance
with national or regional guidelines.
Specifications
Power supply Consumption Weight Dimensions Compatible battery Compatible pruning
shears
BC3015
48V
2.5Ah
117Wh
0.012A
0.492W
257 g /
9 oz.
1420 mm /
55 inches 831B F3015
BC3020
36V
3Ah
108Wh
0.012A
0.492W
203 g /
7 oz.
1725 mm /
68 inches L100B F3020
These specifications are given as an indication only. Under no circumstances may they be considered as contractually binding.
They are subject to modification without prior notice in the interests of product development. Patented equipment.