Inficon IRwin Methan Leak Detector User manual

How to Perform GC Function Test on IRwin Methane Leak Detector
(for a factory set unit)
QUICK START GUIDE
1 of 3
1
Make sure your IRwin is set in Universal Mode (see
the How to set your IRwin for Universal Mode quick start
guide)
Select Function Test and press
2
3
4
5
Press followed by
Press to perform a function test with GC Mix
1.0% CH450ppm C2H6 1000ppm C3H8
mimd66en1-03 (1910)
Press . Use to select GC in the drop-down
menu, press

How to Perform GC Function Test on IRwin Methane Leak Detector
6
Press to start the Function Test for GC
7
Expose the instrument to GC gas mix
(GC mix 1.0% CH450ppm C2H6 1000ppm C3H8)
8
The Function Test is in progress
9
Expose both probe and instrument to fresh air
2 of 3
10
The GC Analysis is in progress
mimd66en1-03 (1910)

www.inficon.com [email protected]
Due to our continuing program of product improvements, specifications are subject to change without notice.
All trademarks are the property of the ir respective owners.
©2019 INFICON mimd66en1-03 (1910)
How to Perform GC Function Test on IRwin Methane Leak Detector
11
The Function Test is successfully completed when
the graph shows detection of methane, ethane and
propane
12
A successful test will be conrmed by a green, ticked
circle. You can also save the GC report.
Use IRwin App to transfer your saved log les to your
computer and create pdf le of the test.
IRwin App is available on www.incon.com
13 IRwin SXG
S/N: 92001853
S/W ver: 3.06.01
Function Test Result GC 10/10/2019
13:46:53
60s 120s 180s
45B Westmansgatan
Gas Concentration 1.6 %
CH4 (Methane)
C2H6 (Ethane)
C3H8 (Propane)
Address
Signature/Department
Comments
www.inficon.com
v3.21 003012 12.8