Inficon IRWIN User manual

IRWIN HARNESS GUIDE
– HOW TO ATTACH YOUR HARNESS
SNAP LOCK
Pull the button to open
the locking mechanism.
FASTEN IRWIN IN THE HARNESS
Use the self-fastening straps on the back of the harness to secure IRwin.
The top strap is fastened around the handle.
Self-fastening
straps

1) Attach the straps at
the top and place the
shoulderpads close
to IRwin.
1
2
35
6
4
3) Take the left strap and
place over your left shoulder.
4) Grap the strap with your right
hand behind your back and
attach it on the lower right side.
Stability:
If IRwin tends to fall into a vertical position
while walking, connect the bottom right
strap to the extra snap lock on the back
to stabilize the instrument.
Comfort:
Adjust the straps for best comfort.
Adjust length:
Adjust the length of the
straps for best comfort.
ADJUSTMENTS OPTIONAL METHOD
HOW TO ATTACH THE HARNESS
5, 6) Repeat this procedure
with the other strap.
2) Hold IRwin in front
of you with the display
facing upwards.
Ready to go!
Optional method for attaching the harness
when the straps are already connected.
Arm Arm
Head
The straps
should cross
on the back.
Arm Arm
Head