Infineon AIROC IFW956810 User manual

www.infineon.com/cms/en/product/wireless-connectivity/
Kit contents
1. IFW956810 single-band Wi-Fi 4 CCM evaluation kit to evaluate
the IFW56810 single-band Wi-Fi 4 CCM module
2. USB Type-A (male) to Type-C (female) cable
3. Quick start guide (this document)
Quick start guide
AIROC™Single-band Wi-Fi 4 Cloud Connectivity Manager (CCM)
Evaluation Kit
IFW956810
AIROC™IFW956810 single-band Wi-Fi 4 CCM evaluation kit features a
configurable Wi-Fi connectivity module that provides a simple, secure,
plug-and-play solution for connecting products to IoT cloud services.
This product also integrates Infineon’s CIRRENT™ cloud solutions to
make connected products easier to use, more reliable, and more secure.

Quick start guide
This document guides you in registering your kit with Infineon.
Aer registration, your kit is automatically bound to your Infineon
CIRRENT™Cloud ID. This enables simple and secure provisioning
of your kit to the cloud service of your choice.
Aer completing the steps in this guide, you will be directed to your
personal space in the Infineon Developer Center. Use the resources in the
Developer Center to evaluate the kit and connect to a cloud service.
IFW56810 AIROC™CCM evaluation kit board details
RST
TXD
RXD
EN
GND
VDD_33
INT
MSG
NC
FTDI_UART_RXD
FTDI_UART_TXD
NC
GND
VDD_33_USB
NC
NC
USB Type-C male plug
8x2 pin header (J60)
IFW56810 module
Printed antenna
Unique module ID
azw346F248ED318

Quick start guide
Repeat the following steps for each kit.
1. Enter the unique URL printed on the evaluation kit in a web browser.
The URL has the following format:
https://ifxcloud.io/<unique_module_id>
Note that the module identifier is case-sensitive.
If you are taken to www.infineon.com instead of the login page, verify
that the URL is entered correctly.
2. Log in with your Infineon account. Create a new Infineon account
if you don’t have one.
3. Choose an existing sub account, or create a new sub account if you don’t
have one. You can have multiple sub accounts to manage your kits
in CIRRENT™Cloud.
4. Follow the instructions in the Getting started guide to connect the
kit to the AWS IoT cloud service.
Notes:
• Repeat these steps to register your kit to a different account or
sub account. You can register a kit to only one account and one sub
account at a time.
• Follow the guidance in the email received from Infineon to explore your
personal space in the Infineon Developer Center.
Register the kit in the Infineon Developer Center

Quick start guide
Date: 03/2023 All rights reserved. ©2023 Infineon Technologies AG
Document number: 002-34635 Rev. *A