Infinite Peripherals AMP 100 User manual

AMP 100
User Manual
Standalone Android™ Payment Device

User Manual — AMP 100
2
Contact Information
Mobility Sales/ Technical Support Center
Innite Peripherals, Inc.
17681 Mitchell N
Irvine, CA 92614
Toll-Free: [phone]
Ofce: [phone]
Website: ipcmobile.com
Headquarters/ Main Warehouse
Innite Peripherals, Inc.
2312 Touhy Avenue
Elk Grove Village, IL 60007
Toll-Free: [phone]
Ofce: [phone]
Fax: [phone]
Compatible Devices
Legal Notice
Trademarks
Infinite Peripherals, Mobilize Your Enterprise, Linea Pro, Infinea, Infinea Tab, and Infinea Omni are trademarks of Infinite Peripherals, Inc. All other trademarks are
the property of their respective owners.
The “Android™” name, Android logo, “Google Play” brand, and other
Google trademarks are property of Google LLC and not part of the
assets available through the Android Open Source Project.
Made for Android™

User Manual — AMP 100
3
Table of Contents
Legal Notice 2
Compatible Devices 2
Trademarks 2
Getting Started 4
Features 4
Accessories 4
Technical Specifications 5
Physical Dimensions 5
Connectivity 5
Certifications 5
Environment 5
Box Contents 6
Getting Started 6
Product Description 7
Set–up Your AMP 100 8
Modes 8
Communication Parameters 8
Software Versions 8
Charge Your AMP 100 9
Insert or Remove the SIM Card 10
Turn on the AMP 100 11
Smart Card Reader 11
Magnetic Stripe Reader (MSR) 12
Contactless Card Reader 12
Reset the AMP 100 13
Maintenance 13
Battery Replacement 13
Cleaning the AMP 100 13
Troubleshooting 14
Warranty 14
Disclaimer 15
Product Returns and Servicing 15
Symbols 15
Federal Communications Commission 16

User Manual — AMP 100
4
Visit our website at https://ipcmobile.com or contact your Innite Peripherals account representative for additional information about our current and
future product accessories.
Getting Started
The AMP 100 provides wireless POS functionality in a 127mm (5”) colorful display and capacitive touch screen. The sleek ergonomic design offers power and
performance with a smart card reader, Bluetooth module, Wifi, 4G wireless mobile, and magnetic stripe reader-integrated PIN-entry devices (PED) that fits in
your hand.
Features
Smart Card Reader
ISO7816, EMV L1 certied
Contactless Card Reader
Near-field communication (NFC) or contactless credit card for payment
applications.
Accessories
Magnetic Stripe Reader (MSR)
Built-in magnetic stripe reader incorporates a 3-track, bi-directional
read head, requiring a single swipe to read data from all three tracks.
(Optional) Barcode Reader
High-performance 2D imager scan engine
Image sensor 640 x 480 pixels

User Manual — AMP 100
5
Connectivity
Certifications
Environment
Connectivity
Apple 9-pin connector
Temperature
Operation: -10°C to +40°C (14°F to +104°F)
Storage: -20°C to +50°C (-4°F to +122°F)
Relative Humidity
Operation and Storage: 5%-90%
PCI PTS 5.x, EMV L1
Contactless Card Reader
ISO/IEC 14443 Type-A/MIFARE:
- MIFARE MINI
- MIFARE CLASSIC-1K, MIFARE CLASSIC-4K
- MIFARE ULTRALIGHT, ULTRALIGHT-C
- MIFARE PLUS 2K/4K
- MIFARE DESFire
- Others
ISO/IEC 14443 Type-B
- Supports most of the cards
ISO/IEC 15693
- Supports most of the cards
JIS X 6319-4
- Compatible with FeliCa
Barcode Types Supported
1D high-speed imager supporting barcodes:
JAN/UPC/EAN incl. add on, Codabar/NW-7, Code 11, Code 39, Code 93,
Code 128, GS1-128 (EAN-128), GS1 DataBar (RSS), IATA, Industrial 2of5,
Interleaved 2of5, ISBN-ISSN-ISMN, Matrix 2of5, MSI/Plessey, S-Code,
Telepen, Tri-Optic, UK/ Plessey
2D high-speed imager supported barcodes:
Aztec Code, Aztec Runes, Chinese Sensible code, Codablock F,
Composite codes, Data Matrix (ECC200), Passport MRZ (OCR-B), Maxi
Code (mode 2~5), MicroPDF417, Micro QR Code, PDF417, QR code
Battery
Rechargeable Lithium-Polymer battery 3.7V/2200 mAH
Power Supply
5V through USB-C
5V through single charger
Buttons
On/Off button
Two buttons for the barcode scanner
Indicators
4 LEDs for battery status
Electromagnetic buzzer
Weight
210g (7.41oz)
Dimensions
146mm (l) x 84.5mm (w) x 15.4mm (h) ( in x in x in.)
Port
USB-C port
Physical Dimensions
Technical Specifications
Magnetic Card Reader
3-track bidirectional reading capabilities

User Manual — AMP 100
6
Box Contents
• Before using your AMP 100, remove the unit and any included accessories from the shipping cartoon and verify the contents against the packing list.
• Retain all packing materials, invoice, and bill of lading. These may be required to return the device for servicing later, or to process a claim with the
shipping carrier.
• Carefully inspect the contents inside of the packaging for any signs of damage. If there are signs of damage, do not attempt to use the unit. Notify your
account executive or contact technical support at https://ipcmobile.com/devices.
• Ensure the battery is fully charged prior to initial use.
These items are included with your unit:
AMP 100 (1)
USB-C cable (1)
Getting Started
The AMP 100 allows you to scan barcodes and capture magnetic stripe data to pass into compatible applications. Ensure the battery is fully charged before first use.
The following helps you get the AMP 100 ready for use:
What to do Section
Assemble the AMP 100 with your device Assemble Your AMP 100
Fully charge battery before rst use Charge Your AMP 100
Software required to operate the unit with you device Develop Applications
Note:
Use of the smart card reader and other functionality requires the installation of software. Contact your Infinite Peripherals account representative for available software.

User Manual — AMP 100
7
Product Description
1. Barcode reader
2. Reset button opening
3. Power button
4. Magnetic Card Reader
5. Left scan button
6. Charging pads/Serial Communication for docking stations
7. SIM card tray
8. Chip chard reader
9. LCD Display with touch screen
10. Contactless card
11. Right scan button
12. USB-C port

User Manual — AMP 100
8
Set–up Your AMP 100
Two USB communication mode are available based on which USB cable is connected:
USB-A to USB-C (USB AM 4PIN to Type C SYI-0108B) communicates to Android’s application processor to select:
• Charge this device
• Transfer les
• Transfer photos (PTP)
• Use device as MIDI
USB-C to USB-C (Type C Male to Type C Female SYI-0129) provides communication to a secure processor. Plug this cable into the USB-A to USB-C cable for:
• Application download mode to load rmware and/or application to secure processor
• System mode for key management
• Test mode
Modes
• To enter application download mode, plug the USB cable and press both Scan buttons. Once you hear one beep, release the buttons.
• To enter system mode, release the buttons after you hear two beeps.
• To enter test mode, release the buttons after you hear three beeps. When working with the secure processor USB, a special USB cable, SYI-0129 is
required.
Communication Parameters
The default USB VC serial port communication parameters:
• 115200bps
• 2-stop bits
• No parity
Software Versions
To view the firmware and/or application versions, go to the Android Settings Menu > About phone (Android version) > Pinpad information (secure processor). The
Phone status is displayed:
• Pinpad information
• Status
• Legal information
• Version
• Model
• Android version
• Android security patch level
Pin pad information:
• Status
• Serial number
• CPU serial number
• Capabilities
• Firmware name
• Firmware version
• Application name

User Manual — AMP 100
9
Charge Your AMP 100
The rechargeable Li-Po battery is charged by the
• USB power adapter connected to the USB port,
OR
• Via the device attached to a docking station.
Note:
The battery cannot be removed. If you have any issues with the battery, contact your Infinite Peripherals account representative.

User Manual — AMP 100
10
Insert or Remove the SIM Card
To enable the smart card features of your AMP 100, insert a Nano SIM card into the SIM tray.
Note:
The SIM tray supports only Nano-size cards.
1. Use a paper clip or ejection tool to open the tray on the side of the unit.
2. Slide the tray out carefully.
3. Place the SIM card into the tray, and then close the tray.

User Manual — AMP 100
11
Smart Card Reader
1. Position a smart card with the gold contacts facing upward.
2. Place the card into the smart card reader slot in a smooth, continuous motion until it seats rmly.
3. Hand the unit to the customer for PIN entry.
4. Remove the card after the display indicates the transaction is complete. The transaction is void if the card is removed before the transaction is complete.
Turn on the AMP 100
1. With the unit turned off, press the Power button until you hear a single beep.
2. Press the button a second time to activate the scanner for normal barcode scanner.
Note:
If the AMP 100 is idling for an extended period of time, the power turns off automatically to preserve the charge on the internal battery pack. When turned
off, the unit goes to sleep immediately.

User Manual — AMP 100
12
Contactless Card Reader
The contactless card reader supports a variety of payment types. Refer to Technical Specifications on page 12 for details.
1. Activiate the unit by pressing the Power button.
2. Place the RFID tag/card as close as possible over the receiver/transmitter as
indicated by the RFID label.
Note:
Depending on the type of RFID tags/cards, it may be necessary for tags/cards to
make direct contact with the surface where the RFID receiver/transmitter is located
for proper reading and writing.
Magnetic Stripe Reader (MSR)
The built-in magnetic stripe reader incorporates a 3-track, bi-directional, encryption-capable read head. A single swipe reads data from all three tracks.
Note:
The MSR functions as an unencrypted MSR until an encryption key is injected into the MSR head by a designated Infinite Peripherals key injection facility. Refer
to https://ipcmobile.com/support/technical-services#key-injection for details.
1. Insert the card with the magnetic stripe face up into either end of the MSR
reader, and then swipe the card through toward the other end of the reader.
2. Give the unit to the customer for signature or PIN entry.
Note:
To ensure the magnetic stripe pass over the read head evenly, keep the edge of the
card flat on the inner edge of the reader.

User Manual — AMP 100
13
Maintenance
Battery Replacement
Do not attempt to open the AMP 100 or replace the battery. If the battery is not charging properly or the unit is not turning on, contact your Infinite Peripherals
account representative or technical support at https://ipcmobile.com/support.
Cleaning the AMP 100
• Use a clean, soft cloth slightly dampened with water and a drop of mild soap to clean the unit.
• Do not spray cleaners directly onto the display.
• For stubborn stains, use alcohol-based cleaners.
• Never use thinner, trichloroethane, or ketone-based solvents as they can deteriorate the plastic or rubber parts.
Note:
Do not clean the card readers as this may void the warranty. For card reader service, contact Infinite Peripherals support.
Reset the AMP 100
You can perform a soft reset of the AMP 100 to cycle the power and allows the unit to restart.
1. To begin the reset, press the reset button on the top of the unit until you hear a series of beeps.
2. Release the button. The unit restarts.
Note:
If the AMP 100 does not restart promptly, repeat the steps.

User Manual — AMP 100
14
Troubleshooting
If a problem persists or is not addressed in this section, contact Infinite Peripherals support at https://ipcmobile.com/support.
Problem Possible Cause
Blank display • Ensure the battery is fully charged.
Touchscreen does not respond • If the display is blank, contact https://ipcmobile.com/support.
• If the display does not respond but is not blank, do the following:
Magnetic card reader • Perform a test transaction using one or more cards to ensure the issue is not a defective card.
• Ensure the card is swiped correctly.
Smart Card Reader • Ensure the card is inserted correctly.
Warranty
Innite Peripherals does not warrant, and is not responsible for, any damage to the AMP 100 (“Product”) or the assembled device as a result of liquid or solid
particle intrusion into the Product, or damaged caused by dropping the Product with the assembled device. If a material or workmanship defect arises with
regard to any Innite Peripherals product, and a valid claim is received within the Warranty Period, Innite Peripherals (at our sole discretion) will repair the
Product using new or refurbished parts, or replace the Product with a new or refurbished Product.
For purposes of this limited warranty, “refurbished” means a product or part that has been substantially returned to its original specications. In the event of
a defect, these are your exclusive remedies.

User Manual — AMP 100
15
Disclaimer
NO WARRANTY. This technical documentation is provided AS-IS. Further, the documentation does not represent a commitment on the part of. Innite
Peripherals, Inc does not warrant that it is accurate, complete or error free. Any use of the technical documentation is at the risk of the user. Innite
Peripherals, Inc reserves the right to make changes in specications and other information contained in this document without prior notice, and the reader
should in all cases consult Innite Peripherals, Inc to determine whether any such changes have been made. Innite Peripherals, Inc shall not be liable for
technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use
of this material. Innite Peripherals, Inc does not assume any product liability arising out of or in connection with the application or use of any product or
application described herein.
Product Returns and Servicing
Use the link in step 1 to create an account and gain access to our Knowledge Base and online support services. Through our online support center, you’ll be
able to download les, open a Support Ticket, manage your RMAs, view your account Prole and subscribe to Alerts.
To request a RMA
1. Create a user account in the RMA Support Portal at http://ipcmobile.com/support/rma/
2. Login to your user account, and then click Create RMA Request.
3. Read the instructions provided and complete the online request form.
4. Note the assigned RMA number and write it clearly on your shipping carton.
5. Ship your equipment back to us using the address provided.
Symbols
Symbol Description
Refer to the instructions before using this product
Manufacturer
Manufacture Date
Caution
Serial Number
P/N Part Number
Waste Electrical and Electric Equipment
Complies with part 15 of the FCC rules

User Manual — AMP 100
16
Federal Communications Commission
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the
equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
1. This device may not cause interference and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specic operating
instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.