Infiniter ML-200G User manual
Plug in
ML-200G
INSTRUCTIONS
OPERATION FUNCTIONS
OPERATION THE ML-200
1. Attach the ML-200 to the cutting machine with four provided M4 screws
2. Plug in the ML-200 with the USB adaptor
3. Turn on the ON/OFF switch
4. Loose the fixing screw gently and adjust the module housing to project the laser
line into position you want. Tighten the fixing screw to fix the laser’s position
5. Loose the fixing ring. Rotate the adjustable bushing to find the .angle you want
Tighten the fixing ring to fix the laser line’s angle
6. Cut the stuff along the laser line
APPLICATIONS
Fixing ring
Laser aperture
ON/OFF switch
Module housing
MIRCO USB
Adjustable bushing
Fixing screw
Setting holes
Turn on
SPECIFICATIONS
Dimension(L X W X H)
4.88”X2.13”X2.32”(10.1cm X 5.4cm X 5.9cm)
Weight
9.80oz (280g)
Wavelength
520nm
Output power
ClassⅢaCW mode
Width of laser line
<3mm at 5M
Operating temp range
-4 ﾟF ~ 140 ﾟF (-20゜C ~ +60 ﾟC)
Mean time to failure
10,000 hours
Emitting angle
>120 ﾟ
Housing
Metal
Finishing
Black anodized
Power
DC Adaptor 5~6V,>0.5A
WARNING
Use of controls of adjustment or performance of procedures other than those
specified herein may result in hazardous radiation exposure
SAFETY PRECAUTIONS
Laser radiation is harmful to the eyes, never look directly into the laser beam or its direct reflection
1. Never aim the laser beam at persons’ eyes
2. This unit must be used by experienced technical personnel only
Do not leave the laser beam unattended
3. Do not target vehicles or aircraft with the laser beam when the unit is used
outdoors
4. Do not look directly into laser beam with optical instrumentation unless adequate
protective filters are used to protect the eyes.
5. Avoid aiming the laser beam at mirror- likes surfaces. Remove any unnecessary
mirror-likes surface from the vicinity of the laser beam path.
6. The warranty will no longer exist once the product been taken apart.
Stone cutting
Wood cutting
Wood cutting
Wood cutting
VLM-520-ML-200G
OUTLINE DIMENSIONS
Outline
SPECIFICATIONS
SPECIFICATIONS
520-ML200G
1
Dimensions(L*W*H)
4.88"x2.13"x2.32"(12.4 x5.4 x5.9 mm)
2
Weight
10oz.
3
Output power
Class IIIa CW mode
4
Wavelength
520nm
5
Width of laser line
< 0.12"(3mm)@196.9"(5m)
6
Operating temp. range
-20°C ~+60°C
7
Emitting angle
> 120°
8
Housing
Metal
9
Finishing
Black anodized
10
Power
Micro USB(Adapter included)
