INK+IVY BEVERLY User manual

Please carefully read all instructions before assembling.
For your safety and ease,assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
d ac
Page 1 of 2
ive packaging.
Do not discard any contents until after assembly
is complete to avoi
hardware.
Remove parts and hardware from box along with any plastic protect
Parts List
cidentally discarding small parts or
Item
P1
Description QTY
P2
Seat
Legs
1
4
Hardware List
Item Description QTY
H1
H2
12
1
Screw Φ5/16 x L 5/8"
Allen Wrench 5/16"
Important safety instructions:
ASSEMBLY INSTRUCTIONS
Description: BEVERLY Round stool

Assembly Procedures:
Step 1.
1). Assemble the stool on a flat,soft surface such as a carpet or cloth to prevent
scratching the finish.
2). Turn the stool (P1) upside down and lay on protective carpet .
Hand-tighten and secure the leg to the seat with screws (H1) and Allen Wrench (H2),
as shown.
Page 2 of 2
H1
H2
12
1
Screw
516" x 5
8"
Allen Wrench
516"
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THE Y
SHOULD BE PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS
CHECK TO BE SURE THAT ALL HARDWARE IS KEPT TIGHTENED.
Thank you for your purchase.
Step 2.
1). Make sure the stool is level and securely tighten all screws by Allen Wrench (H2).
P1
P2
P2
P2
H2
H1
H1
H1
Turn the assembled stool to an upright position.