INK+IVY Lounge User manual

a
c
d
b
e
g
h
f
ij
k
Pre-assembly:
Take out all parts and hardware from box.
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.

Step 2. Insert two wood dowels (k) to the seat frame as shown below, then attach left leg (D) to the
assembled back cushion (A) and seat cushion (B) according to the label "D" on the left leg as shown below.
Securely tighten the bolts with Allen wrench (e).
Assembly Procedures:
Step 1. Assemble the lounge on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Open the bottom covering of seat cushion (B), then attach the seat cushion (B) to the back cushion (A) as shown
below. Securely tighten all bolts with Allen wrench (e).
B
A
D
A
B
k
D

Step 3. 1) Insert back top rail (E) and back bottom rail (F) to the left leg (D) according to the label "E" and "F" on
back top rail (E) and back bottom rail (F).
2) Insert two wood dowels (k) to the seat frame as shown below , then loosely attach right leg (C) to the assembled
back cushion (A), seat cushion (B), back top rail (E) and back bottom rail (F) as shown below . Securely tighten all
bolts with Allen wrench (e) .
Step 4.
1) Attach "L" Brackets on the end of back top rail (E) and back bottom rail (F) to right leg (C) and left leg (D) as
shown below.
2) Securely tighten the bolts with Allen wrench (i).
3) Attach the "L" Bracket under the back top rail (E) to the back cushion using screw (j). Turn the assembled
lounge to an upright position. Assembly is complete.
(g)x4
(h)x4
(f)x4(i)x1
(j)x1
F