INK+IVY April Accent Bench User manual

Important safety instructions:
Please carefully read all instructions before assembling.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
Remove all parts and hardware from box along with any plastic protective packaging.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
H1
H2
H3
H4
H5
Assembly Procedures:
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY DAMAGES
RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
P1
P2
P3
P4
Bench Top
Right Leg
Stretcher
Bolts Ø5/16"*2-3/8"
Lock Washer Ø5/16"
Flat Washer Ø5/16"*3/4"
Allen Wrench 4mm
Screws M4*1-1/2"
8
8
8
1
4
April Accent Bench
Left Leg
Step 1. Assemble the Bench on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Assemble Leg (P2) to Bench Top (P1). Do not tighten Bolts.
2
2
2
1
H1
H2
H3
H4
(H1)x2
(H2)x2
(H3)x2
Bolts
Lock Washer
Flat Washer
P2
P1
H6 Screwdriver (Not provided) 1

Step 4:
a. Turn the Bench over and place it upright on a level surface.
b. Assembly is complete.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
(H1)x2
(H2)x2
(H3)x2
Bolts
Lock Washer
Flat Washer
H1
H2
H3
H4
H5
(H5)x2 Screws
P2
P3
P4
P1
(H1)x4
(H2)x4
(H3)x4
Bolts
Lock Washer
Flat Washer
Step 3. Repeat Step 1 & Step 2 for the rest Legs and Stretcher
(H5)x2 Screws
H1
H2
H3
H4
H5
P3
P2
P1
P4
Step 2. Insert Stretcher (P4) to Leg (P2) & (P3) then attach (P3) to Bench Top (P1). Tighten all Bolts.
Then secure Stretcher (P4) to Leg (P2) & (P3) as shown below:
(H6)x1 Screwdriver
(Not provided)
H6
(H6)x1 Screwdriver
(Not provided)
H6