INK+IVY Mateo 267555 User manual

Pre-assembly:
Removeallpartsandhardwarefromboxalongwithanyplasticprotectivepackaging.
Donotdiscardanycontentsuntil after assemblyiscompletetoavoidaccidentallydiscarding small partsor
hardware.
Importantsafetyinstructions:
Pleasecarefullyread allinstructionsbefore assemblingthe stool.
For your safetyand ease,assemblybytwoor moreadultsisrecommended.
Keep instructionsforfuture use.
a
c
d
e
b
f
g

B
Step 2. Attachtheseat cushion (B)tochairback(A)using bolts(a), lockerwashers(d)andflat washers(e).
Looselytighten byAllen wrench(f).
AssemblyProcedures:
Step 1. Assemblethestoolonaflat, soft surfacesuchasacarpetor clothtopreventscratching the finish. Attach
the seatcushion (B)tochairback(A)using bolts(c), lockerwashers(d)andflat washers(e).Looselytighten by
Allenwrench(f).
Step1
Step2

f
g
D
G
E
Step 3
C
F
L
R
R
L
L
Step 3. 1) Insert the left front leg(C)tothebottom of seatcushion (B)accordingtothelabel"L" onthe corner
blockofseatcushionandthefront legstop,then insert theleft stretcher(E)tothe front leg(C)andchairback legs
according tothelabel"L" at the holesinthe legsand the front end ofstretcher(E).Looselyattachthefront leg
(C)totheseatcushion(B)using using bolt (b),lock washer(d)and flat washer (e). Donot tighten the screwsat
thistime.
Step 4.
1)Insert therightfront leg(D)tothebottom of seatcushion (B)accordingtothelabel"R" onthecornerblock of
seatcushion and the front legstop,theninsertthe right stretcher (F)tothe frontleg(D)andchairback legs
according tothelabel"R"at the holesinthe legsand the front end ofstretcher(F).Looselyattachthefront leg
(D)totheseatcushion(B)using bolt (b),lock washer(d)and flat washer (e). Donot tighten the screwsat this
time.
2)Insertthefront stretcher(G)betweenthefront legs(C&D)
3)Securelytighten all bolts, but donotovertightenthebolts.
4)Tightenallscrews(g)throughthestretchers(E,F,G)tothe front legsand chairback legs
5)Assemblyiscomplete.
Step4
Step3