FURNITUREBOX MONZA DINING TABLE 4 User manual

MONZA
DINING TABLE 4
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips, advice
and assembly video or visit
furniturebox.co.uk/club/monza-4
SCAN ME

• Check you have all the components and
tools listed.
• Remove all fttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 100Kg
45 MINUTE
BUILD

Follow us on Instagram
@furniturebox_uk
STEP 1
Put the pieces on a at, soft
surface e.g. a carpet to avoid
scratching or bumping. Install
one leg piece [2] onto the base
[3] using screw (A) and washer
(F). Fasten with spanner (B).
Insert wooden dowel (E) into
the hole in the leg as shown.
ATTENTION: For ease of
assembly, do not to fully
tighten xings yet.
STEP 2
Install the second leg
piece [2] onto the base
[3] and connect the
cross-section using the
wooden dowel (E).

www.furniturebox.co.uk
FULL ASSEMBLY INSTRUCTIONS
STEP 3
Install the connecting piece [4]
onto the table frame. Secure
using screws (A) and washers (F).
ATTENTION: To maximise table
stability, now fully tighten all
xings in the frame.
STEP 4
Add the table [1] to the table
frame. Secure to the connecting
piece using screws (A) and
washers (F). Fully tighten using
spanner (B) and test stability.
STEP 5
Your table is now ready
to use and enjoy.

www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.